Makita TW001GD102 Bruksanvisning

Makita skruvdragare TW001GD102

Läs gratis den bruksanvisning för Makita TW001GD102 (12 sidor) i kategorin skruvdragare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Makita TW001GD102 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
INSTRUCTION MANUAL
Cordless Impact Wrench
TW001G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TW001G
Fastening capacities Standard bolt M12 - M36
High tensile bolt M10 - M27
Square drive 19.0 mm
No load speed (RPM) Max impact mode (4) 0 - 1,800 min
-1
Hard impact mode (3) 0 - 1,400 min
-1
Medium impact mode (2) 0 - 1,150 min
-1
Soft impact mode (1) 0 - 950 min
-1
Impacts per minute Max impact mode (4) 0 - 2,500 min
-1
Hard impact mode (3) 0 - 2,400 min
-1
Medium impact mode (2) 0 - 2,200 min
-1
Soft impact mode (1) 0 - 1,900 min
-1
Max. fastening torque
(at max impact mode (4) )
Fastening with M30 for 6 seconds
1,800 N·m
Fastening with M30 for 3 seconds
1,500 N·m
Nut-Busting torque
(at max impact mode (4) )
2,050 N·m
Overall length 217 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 3.9 - 4.2 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL4025 / BL4040
Charger DC40RA
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-2:
Sound pressure level (L
pA
) : 100 dB(A)
Sound power level (L
WA
) : 111 dB (A)
Uncertainty(K):3dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.


Produktspecifikationer

Varumärke: Makita
Kategori: skruvdragare
Modell: TW001GD102

Behöver du hjälp?

Om du behöver hjälp med Makita TW001GD102 ställ en fråga nedan och andra användare kommer att svara dig