Marmitek Audio Anywhere 630 Bruksanvisning

Marmitek AV extender Audio Anywhere 630

Läs gratis den bruksanvisning för Marmitek Audio Anywhere 630 (3 sidor) i kategorin AV extender. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3.5 recensioner. Har du en fråga om Marmitek Audio Anywhere 630 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

Package content

Audio Multi language user guide

1x Transmitter

1x Receiver

2x Type C power cable

2x RCA (cinch) audio cable, 100 cm

1x 3.5mm jack (male) to RCA cable, 12 cm

2x 5V USB-A Power adapter

1x Quick guide

Audio Anywhere 630

Wireless audio connection

Create a wireless audio

connection between TV

and hi-fi system

Safety instructions

Please read these instructions thoroughly before

you use the device and keep them for future

reference.

• Only for indoor use.

• Do not expose the product to extremely high or low

temperatures, strong light sources or direct sunlight.

• This product is not a toy. Keep out of reach of

children.

• Connect the adapter to the mains only after you

have verified that the line voltage corresponds to

the value specified on the type plates.

• Never connect a power adapter if it's damaged. In

such cases, please contact your supplier.

• Disconnect the AC/DC power adapter from the

mains when this device is not in use for prolonged

time.

• Never open the product: the device may contain

parts with deadly voltage.

• Repairs or service should only be performed by

qualified personnel.

Installation

• We recommend that you switch off your equipment

before connecting cables in order to prevent any of

the devices being damaged.

• Record players need special phono pre-

amplification to make vinyl records sound right.

Many turntables have this built in, some do not. This

product does not have a built-in phono preamp.

1. Connect the Audio Source to the input[1] on the

Audio Anywhere 630 transmitter using the RCA

audio cable.

2. Connect the Audio Destination* to the audio output

[2] on the Audio Anywhere 630 Receiver using the

RCA audio cable.

3. Connect the power adapters [3] with the USB C

cable to the Transmitter and Receiver and plug the

power adapters into the electrical socket.

4. The Transmitter and Receiver will automatically

turn on and the white LED will flash slowly. On

connection the LED light will be steady.

5. The audio connection is ready to use.

Pairing

When you want to pair an extra receiver, push the

power button 2 times quickly on the transmitter. The

LED light will flash quickly. Do the same on the new

receiver. After a few seconds the LED light will light up

steady and the new receiver is operational.

Standby

When there is no audio input for more than 30

minutes, the Audio Anywhere 630 set will go in

standby and the LED light will turn off. When audio

input is detected again, the set will wake up in a few

seconds and the wireless audio connection will work

again.

Power off

Long press the power button to turn off the transmitter

and or receiver.

Frequently asked questions (FAQs)

Please go to www.marmitek.com if you have any

questions.

Technical specifications

Audio transfer method Digital

Transmitter frequency 2.4 GHz

Frequency channels 26 channels

RF connection Paired connection (TX and

RX)

Extra receivers up to 10 extra RX

Supported audio freq. 20 Hz ~ 20 kHz

Audio delay 12.5 ms (between TX and RX)

Audio input/output 2x RCA (Stereo L/R)

Operating range Up to 100 meters clear field,

up to 20 meters through walls

and ceilings.

Data transfer speed Up to 2 Mbps, GFSK

modulation

Standby After 30 minutes no audio

Power 5 VDC USB adapter with USB

Type C cable

Power consumption 0.9 W (transmitter) and 0.3 W

(receiver)

Standby (auto) <0.25 W (TX/RX)

Standby (power button) < 0.15W (TX) and < 0.1W

(RX)

Dimensions (h x w x d) 90*75*22mm (TX/RX)

Weight 160 grams

*e.g. hi-fi System, home cineama set, powered

speakers

Declaration of Conformity

Hereby, Marmitek BV, declares that this Audio Anywhere 630 set is in compliance with the essential

requirements of the 2014/53/EU, 2011/65/EU and 2009/125/EC: 2019/1782 Directives.

Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of-conformity/

More detailed user guide and instructions are available on our website at www.marmitek.com

stay connected marmitek om.c

20688/20220530 | Audio Anywhere 630

Produktspecifikationer

Varumärke:	Marmitek
Kategori:	AV extender
Modell:	Audio Anywhere 630
Höjd:	155 mm
Förpackningens bredd:	130 mm
Maximal upplösning:	- pixlar
Ljudutgång:	2x RCA
Modell:	Sändare och mottagare för AV-utrustning
Bandbredd:	0.002 Gbit/s
Driftspänning:	5 V
Sändarens mått (BxDxH):	90 x 75 x 22 mm
Sändarens vikt:	160 g
Produktens färg:	Svart
Antal USB-portar:	2
bruksanvisning:	Ja
Förpackningstyp:	Låda
Låddjup:	75 mm
Antal per förpackning:	2 styck
AC-inspänning:	100 - 240 V
Kabel inkluderad:	RCA, USB Type-C
Anslutningsteknologi:	Trådlös
Strömkälla av typen:	AC
Växelström Frekvens:	50 / 60 hz
AC-adapter inkluderad:	Ja
Modulator:	GFSK
Strömförbrukning i vänteläge:	0.25 W
Maximal överföringshastighet avstånd:	20 m
Ljudanslutning:	2x RCA
Mottagarvikt:	160 g
Mottagare (B x D x H):	90 x 75 x 22 mm
Typer av nätkontakter som ingår:	EU
Antenn längd:	95 mm
Effektförbrukning (RX):	0.3 W
Effektförbrukning (TX):	0.9 W