Marmitek PH7208 Bruksanvisning
Marmitek
Tillträdeskontrollsystem
PH7208
Läs gratis den bruksanvisning för Marmitek PH7208 (28 sidor) i kategorin Tillträdeskontrollsystem. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Marmitek PH7208 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/28

SIREN
20171 / 20070126 • PH7208TM INDOOR SIREN
© ALL RIGHTS RESERVED MARMITEK®2007
USER MANUAL 3
GEBRAUCHSANLEITUNG 7
GUIDE UTILISATEUR 11
MODO DE EMPLEO 15
MANUALE D’ISTRUZIONI 19
GEBRUIKSAANWIJZING 23
PH7208™
X-10 INDOOR SIREN

2 © MARMITEK

PH7208™ X-10 INDOOR SIREN
SAFETY WARNINGS
• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or
bright light sources.
• Do not open the product: the device contains live parts. The product should only be
repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
•
The sirens operate on 230V. When the housing is opened some components carry a very
high voltage! Only fit the sirens when the plug has been removed from the wall socket.
• The siren produces an extremely loud noise (110dB(A)). In order to prevent damage
to hearing never stand close to an operating siren!
INTRODUCTION
Congratulations on your purchase of the Marmitek X-10 wireless indoor siren PH7208.
This siren operates in response to X-10 commands. These commands are transmitted
onto the mains by Marmitek alarm systems or by a Marmitek SM10 interface. By using
a universal X-10 transmitter (Model SM10) this additional siren can therefore also be
connected to a security system other than a Marmitek X-10 system.
INSTALLATION
One or more additional sirens can be connected to a security system. In order to activate
them the so-called Unit and House Code on the alarm console or interface must be set to
the same address as the address on the siren. The standard factory setting is A-1. The
address can be set using the code dials. The PH7208 can be connected to any wall socket.
The Marmitek sirens operate without additional wiring. To do so a technology is used
whereby the command to activate the siren is transmitted through the mains. The con-
dition for this is that the sirens are connected to the same phase as the alarm system (or
another group within the same phase where appropriate). If this is not possible then
phase connection filters or repeaters should be used (e.g. FD10, CAT3000).
3PH7208™
ENGLISH
Produktspecifikationer
Varumärke: | Marmitek |
Kategori: | Tillträdeskontrollsystem |
Modell: | PH7208 |
Färg på produkten: | Black, White |
Vikt: | 360 g |
Bredd: | 125 mm |
Djup: | 62 mm |
Höjd: | 58 mm |
Snäll: | IP-beveiligingscamera |
Blåtand: | Nee |
Stemcodecs: | G.711 |
Vormfaktor: | Doos |
Placeringsstöd: | Binnen |
Anslutningsteknik: | Bedraad |
Ethernet LAN: | Ja |
Monteringsmetod: | Plafond/muur/paal |
Maximal upplösning: | 2048 x 1536 Pixels |
Totalt antal megapixlar: | 3.21 MP |
Videokomprimeringsformat: | H.264, H.265, M-JPEG |
Typ av strömkälla: | Power over Ethernet (PoE) |
Minimal belysning: | 0.005 Lux |
Antal kameror: | 1 |
Kompatibla minneskort: | MicroSDHC, MicroSDXC |
Nattseende: | Nee |
Fast brännvidd: | 2.8 mm |
Video rörelsedetektering: | Ja |
HTTPS-kryptering: | Ja |
Mikrofon, linjeingång: | Ja |
Antal Ethernet LAN (RJ-45)-portar: | 1 |
Lösenordsskydd: | Ja |
Certifiering: | CE, FCC |
Optisk sensorstorlek: | 1/2.8 " |
Bildstabilisator: | Ja |
Bildsensortyp: | CMOS |
Kamerans slutartid: | 1/5 - 1/16000 s |
vitbalans: | Auto, Manual |
Typ kamerasluter: | Elektronisch |
Password bescherming: | Gebruiker |
Grafikupplösningar som stöds: | 320 x 240,640 x 480 (VGA),800 x 600 (SVGA),1280 x 720 (HD 720),1920 x 1080 (HD 1080) |
Brusreducering: | Ja |
Kabelteknik: | 10/100Base-T(X) |
Max 30 bilder per sekund: | 30 fps |
Ljuddetektering: | Ja |
Nätverksprotokoll som stöds: | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP |
IP-adressfilter: | Ja |
Progressiv skanning: | Ja |
Ethernet-gränssnittstyp: | Fast Ethernet |
Signal-brusförhållande: | 56 dB |
Quality of Service (QoS): | Ja |
Power over Ethernet (PoE): | Ja |
Samplingshastighet: | 8 kHz |
Typ av styrkareglering: | Auto |
Dag/nattläge: | Ja |
Maximalt antal bländare: | 1.8 |
Strömningsmetod: | Multicast |
BNC utgångsportar: | 1 |
Videostreaming: | Ja |
Infrarött (IR) termineringsfilter: | Ja |
Antal effektiva pixlar (H x V): | 2065 x 1553 Pixels |
Linstyp: | Varifocaal |
Bithastighetskontroll: | Constant Bit Rate (CBR), Variable Bit Rate (VBR) |
Justering av bildkvalitet: | Brightness, Contrast, Sharpness |
Strömförbrukning (strömförsörjning via Ethernet (PoE)): | 12.95 W |
Wide Dynamic Range (WDR): | Ja |
Bitrate: | 28 Kbps -12 Mbps |
Wifi: | Nee |
Strömförbrukning (typiskt): | 7 W |
Drifttemperatur (TT): | -10 - 50 °C |
Relativ luftfuktighet i drift (VV): | 10 - 90 procent |
Justering av slutarhastighet: | Automatisch/handmatig |
Mask privat zon: | Ja |
RS-485-portar: | 1 |
Linsens betraktningsvinkel, horisontell: | 102.2 ° |
Rotera & spegla: | Ja |
Typ av varningsmeddelande: | E-mail, Snapshot alert message |
Anti flimmer: | Ja |
Gränssnitt för objektivfäste: | CS-aansluiting |
Linsens betraktningsvinkel, vertikal: | 76.1 ° |
Brett fokus: | Ja |
3D brusreducering: | Ja |
Textoverlay: | Ja |
Iris: | Ja |
Terminalblockport: | Ja |
Behöver du hjälp?
Om du behöver hjälp med Marmitek PH7208 ställ en fråga nedan och andra användare kommer att svara dig
Tillträdeskontrollsystem Marmitek Manualer
3 September 2024
31 Augusti 2024
19 Augusti 2024
9 Augusti 2024
3 Augusti 2024
2 Augusti 2024
28 Juli 2024
26 Juli 2024
Tillträdeskontrollsystem Manualer
- Apc
- EverFocus
- Optex
- IOGEAR
- Liftmaster
- Gewiss
- Viking
- Satel
- Delta Dore
- Techly
- EQ3
- Hikvision
- Axis
- Dahua Technology
- Vimar
Nyaste Tillträdeskontrollsystem Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025
28 Mars 2025