Marmitek PR811 Bruksanvisning

Marmitek Fjärrkontroll PR811

Läs gratis den bruksanvisning för Marmitek PR811 (24 sidor) i kategorin Fjärrkontroll. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 6.5 recensioner. Har du en fråga om Marmitek PR811 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/24

ROGUAR

800

20180 / 20111101 • PGPR811TM + KR814TM

USER MANUAL 2

GEBRAUCHSANLEITUNG 5

GUIDE UTILISATEUR 8

MODO DE EMPLEO 11

MANUALE D’ISTRUZIONI 14

GEBRUIKSAANWIJZING 17

PROGUARD800™SERIES

PR811 PANIC REMOTE AND

KR814 KEYFOB REMOTE

SAFETY WARNINGS

• Do not expose the components of your systems to extremely high temperatures

or bright light sources.

• In case of improper usage or if you have altered and repaired the product

yourself, all guarantees expire. Marmitek does not accept responsibility in the case

of improper usage of the product or when the product is used for purposes other

than specified. Marmitek does not accept responsibility for additional damage other

than covered by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

• The product should only be repaired or serviced by a qualified repairman.

• Keep batteries out of the reach of children. Dispose of batteries as chemical

waste. Never use old and new batteries or different types of batteries together.

Remove the batteries when you are not using the system for a longer period of

time. Check the polarity (+/-) of the batteries when inserting them in the product.

Wrong positioning can cause an explosion.

• Automatic switching devices provide comfort, but can also be dangerous. They

can surprise people or can ignite clothing hanging over an electric heat source.

Please be careful and take appropriate measures to avoid accidents.

INTRODUCTION

The PR811 and KR814 are keyfob transmitters. This product is a part of the Marmitek

ProGuard800 series, and operates together with the ProGuard800 alarm system.

When you wish to know more about the complete system, its possibilities and its

settings, then you can check out the installation manual or visit

www.marmitek.com.

REGISTRATION PROCEDURE

To register keyfobs:

1. From the Programming menu, select Devices, Keyfobs [912].

2. Select the keyfob you want to register; the system initiates Registration

mode.

3. Press a button, making sure that the keyfob’s LED lights up when the

button is pressed.

PR811 & KR814 2

4. Press the same button again. When Save? appears on the panel’s LCD

display, press 9.

PR811

The PR811 is a one-button transmitter that generates a

Medical Emergency alarm when pressed. The transmitter is

water resistant and can be worn around the neck. Its large

button makes it ideal for elderly or sight-impaired users.

When the battery is low, the PR811’s LED flashes during

transmission and a Low Battery signal is sent to the receiver. When

either of these two indications are observed, replace the

battery.(CR2032)

Produktspecifikationer

Varumärke:	Marmitek
Kategori:	Fjärrkontroll
Modell:	PR811
Färg på produkten:	Zwart
Antal effektnivåer:	4
Vikt:	317 g
Bredd:	40 mm
Djup:	213 mm
Höjd:	40 mm
Husmaterial:	Aluminium
Antal lampor:	- lampen
Typ av lampa:	LED
Strömlampa:	- W
Internationell säkerhetskod (IP):	IPX8
Vattentät:	Ja
Batteritid/batteritid:	240 uur
siffra:	1
Lichtstroom:	900 lm
Ficklampa typ:	Zaklamp
Strålavstånd (max):	510 m
Huvudets diameter:	63.5 mm