Marmitek WPR 400 Bruksanvisning
Marmitek
Inte kategoriserad
WPR 400
Läs gratis den bruksanvisning för Marmitek WPR 400 (26 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 10 recensioner. Har du en fråga om Marmitek WPR 400 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/26
WPR 400
Wireless presentation
remote
Easily navigate through your slides
and highlight details on the screen
- air mouse
- magnify function
- built-in battery
- Windows/Mac
user guide
Set content
1 x WPR 400 remote
1 x WPR 400 receiver
1 x sleeve
1 x USB-C power cable
Professional
1_Front WPR 400 Usermanual_70x145_QR.pdf 1 17-4-2024 09:53:03
3
Safety Instructions
Please read these instructions thoroughly before you use the device and
keep them for future reference.
Only for indoor use.
Do not use the product in a damp environment or near water.
Do not expose the product to extremely high or low temperatures,
strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
The built-in rechargeable battery is not replaceable. Do not remove or
replace the battery. Dispose of unit properly. Do not dispose unit in
trash or fire.
Never open the product: the device may contain parts with deadly
voltage.
Repairs or service should only be performed by qualified personnel.
Improper use, self-installed modifications or repairs will void any and all
warranties.
Marmitek does not accept any product responsibility for incorrect use of
the product or use other than for which the product is intended.
Marmitek does not accept liability for any consequential damage other
than the legal product responsibility.
Setup
Before using the WPR 400 for the first time, please charge the device for 1
hour with the included USB-C charging cable.
1. Plug one end of the USB cable into a charger (or into the USB port of a
computer).
2. Plug the other end of the cable into the USB-C port on your WPR 400.
Note: The LED indicator will slowly blink red while charging. When the
battery is full, the LED indicator will turn off.
After charging, remove the charging cable and insert either the USB-A or
USB-C side of the receiver into an available USB-port of your PC.
The WPR 400 requires software in order to use the highlight, magnify and
digital pointer functionality on screen. Download the software from
www.marmitek.com/pages/software and install on your windows or
macOS PC. The ‘Marmitek presenter’ software does not gather or save
any information regarding you or the device it is installed on.
Starting the WPR400
To start using the device, switch the mode switch(1) to either video (VID)
or presentation (PPT) mode. While starting, the indicator will blink green
for a time. After the indicator goes off, the connection is made to the
receiver.
Presentation mode
Presentation mode (PPT) should be enabled when you are presenting a
slideshow. Beside some buttons that will only work during a presentation,
there are also buttons that work outside the presentation.
4
1. Mode switch: Switch between ‘OFF’, ‘VID’ and ‘PPT’ for the mode you
want to use.
2. Highlight/magnify/digital pointer button: Press and hold the button
to have the highlight, magnify or digital pointer on screen. After
releasing the button, the effect will freeze on screen until the button is
pressed again. Double press the button to switch between highlight,
magnifier and digital pointer. This button works during and outside of
your presentation.
3. Previous button: Sends you to the previous slide in your presentation.
4. Next button: Sends you to the next slide in your presentation.
5. Start/stop and black screen button: While in the presentation edit
screen, press once to start the presentation. During the presentation,
press once to turn the screen black. Press again to show the
presentation again. Double press the button to stop presenting.
6. Air mouse and annotation button: The WPR 400 supports air mouse.
Press the button once to start air mouse mode and move the presenter
to move the cursor on screen. In this mode, the previous(3) and next(4)
button changes function to left and right click respectively. Press the
button once again to quit air mouse mode.
In a presentation, you can start annotation mode by double pressing
the button. This will change the cursor into a dot. In annotation mode,
press and hold the button to make notes on screen. Double press the
button in annotation mode to remove all notes. To quit out of annotation
mode, deactivate air mouse mode by single pressing the air mouse
button.*
7. Volume +: Increases the volume of the PC. While holding the highlight
button, this button also enlarges the circle on screen. This button works
during and outside of your presentation.
8. Volume - : Lowers the volume of the PC. While holding the highlight
button, this button also shrinks the circle on screen. This button works
during and outside of your presentation.
*note: not all presentation programs supports annotation mode. Check the
user guide of your software to see if annotation is supported.
Video mode
Video mode (VID) should be enabled when you are playing media on the
screen. Beside some buttons that will only work while watching media, there
are also buttons that work outside the media player.
1. Mode switch: Switch between ‘OFF’, ‘VID’ and ‘PPT’ for the
mode you want to use.
2. Highlight/magnify/digital pointer button: Press and hold the button
to have the highlight, magnify or digital pointer on screen. After
releasing the button, the effect will freeze on screen until the button is
pressed again. Double press the button to switch between highlight,
magnifier and digital pointer. This button works while in a media player
and outside of the program.
3. Previous button: Skips backwards through your media playlist.
4. Next button: Skips forward through your media playlist.
5. Start/stop and mute button: Single press the button to start or stop
your video. Double press the button to mute or unmute the audio of the
PC.
Produktspecifikationer
| Varumärke: | Marmitek |
| Kategori: | Inte kategoriserad |
| Modell: | WPR 400 |
Behöver du hjälp?
Om du behöver hjälp med Marmitek WPR 400 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Marmitek Manualer
8 Oktober 2024
1 Oktober 2024
24 September 2024
24 September 2024
17 September 2024
13 September 2024
9 September 2024
4 September 2024
2 September 2024
1 September 2024
Inte kategoriserad Manualer
- Caple
- Infortrend
- Canopia
- Snow Joe
- Svedbergs
- Soundcraft
- Kindermann
- Vertiv
- Linn
- Dinstar
- Native Instruments
- Benning
- Atmotube
- Serpent
- Defy
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025