Marshall CV226 Bruksanvisning
Marshall
övervakningskamera
CV226
Läs gratis den bruksanvisning för Marshall CV226 (8 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Marshall CV226 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
Broadcast A/V Division
CV226
Lipstick HD Camera
3G/HD-SDI
User Manual
[Firmware Version 0.43]
CV226 Manual
www.marshall-usa.com1 2
Table of Contents
2. Menu Structure
3. WB CONTROL
4. AE CONTROL
5. BACK LIGHT
6. IMAGE STABILIZER
7. IMAGE CONTROL
8. DISPLAY CONTROL
9. RESET
10. TROUBLESHOOTING
11. WARRANTY
1. General Information
03
05
06
07
08
09
10
11
12
13
02
1. General Information
Thank you for your purchase of a Marshall Miniature or Compact Camera.
The Marshall Camera team recommends thoroughly reading this guide for a deep understanding
of on-screen-display (OSD) menus, breakout cable operation, settings adjustment explanation,
troubleshooting, and other critical information.
Please carefully remove all contents of box, which should include the following components:
CV226 includes:
• Camera with breakout cable (Power/RS485/Audio)
• 12V Power Supply
The CV226 Camera utilizes an all-weather rated body with IP67 rated CAP that can be removed
(rotate counter-clockwise) to reveal M12 lens which also can be rotated to adjust fine-focus
position of lens on lens mount. Also, can be swapped out with other M12 lenses containing
specific focal lengths to change AOV.
Each camera comes set to default at 1920x1080p @ 30fps out of the box, which can be changed
in the OSD Menu to a variety of resolutions and framerates.
If the camera is accidentally changed to a resolution or framerate that your monitor or equipment
does not accept, please follow the instructions below to reset camera to factory default:
1. Plug the camera into power source and connect breakout cable to rear camera panel
(locking connection), Power LED should illuminate.
2. Push OSD joystick button UP, DOWN, UP, DOWN and PUSH and HOLD for five seconds.
3. Camera should reset to 1920x1080p @ 30fps.
4. If camera does not reset, repeat steps after a power-cycle.
Produktspecifikationer
| Varumärke: | Marshall |
| Kategori: | övervakningskamera |
| Modell: | CV226 |
Behöver du hjälp?
Om du behöver hjälp med Marshall CV226 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Marshall Manualer
24 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025
15 September 2024
2 September 2024
1 September 2024
23 Augusti 2024
23 Augusti 2024
övervakningskamera Manualer
- USAVision
- Alfatron
- Pentatech
- Topica
- Moog
- Alula
- ZKTeco
- Reolink
- Mobi
- Inkovideo
- Hama
- Allnet
- D-Link
- Insteon
- Hollyland
Nyaste övervakningskamera Manualer
24 September 2025
24 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025