Marshall RG-1 Regenerator Bruksanvisning
Marshall
gitarrförstärkare
RG-1 Regenerator
Läs gratis den bruksanvisning för Marshall RG-1 Regenerator (5 sidor) i kategorin gitarrförstärkare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Marshall RG-1 Regenerator eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
RG-1
MODUL TIONA
RG-1 Regenerator
Regenerator Suggested Settings
Owners Manual
FLY BY (Amp: Clean)
SHIMMER (Amp: Clean)
LOOK AROUND YOU (Amp: Clean)
SWIRLIVERSE (Amp: Clean)
3
5 6 7 8
11
10
9
1
24
From The Chairman
I would like to personally thank you
for selecting one of our effects pedals.
For over 40 years the Marshall name has been synonymous
with the greatest guitar tones in music. We have worked hand
in hand with guitarists from all levels throughout the world to
maintain and improve that special ingredient, ‘The Marshall
Sound.’
Our range of effects pedals gives the opportunity to augment
the classic Marshall tone to add Marshall character to a guitar
set-up.
All our pedals are made with the same utmost attention to
quality, in both materials and manufacture as our world
renowned amplifiers, cabinets and combos, in order to provide
you with optimum reliability and tone.
I would like to wish you every success with all of your musical
endeavours and also your new Marshall effects pedal, which I
am sure you will find a pleasure to play for many years to
come.
Yours Sincerely,
2 3
Introduction
The Regenerator RG-1 is every modulation pedal you'll need in
one package. It is a stereo modulation pedal recreating six
different modulation modes for you to explore giving you full
control over the modulation time, modulation depth and
regeneration of every mode creating a truly awesome stereo
sound field.
Below is a complete run down of the Regenerator's features
for your information. We have also enclosed a number of
suggested settings to help guide you. It should be
remembered that these are only suggested settings and you
should really experiment as much as possible.
Features
1. 'In' Jack Socket
This is the input jack for connection to your guitar or to the
output of another effects pedal when linking pedals together.
2. 'Expression' Socket
An expression pedal can be connected to this socket to
control the modulation speed. Moving the pedal overrides the
speed control on the pedal allowing you to
increase/decrease the control as you perform.
Always use good quality shielded leads.
Always use 9V regulated DC supply with centre negative rated
at 80mA or above.
Although it may seem obvious the first action in achieving a
good effected sound (be it duration / compression etc.) is to
find the perfect bypassed sound. This will then allow the
correct level to be set with the effect unit to allow a cut or
boost in volume and a realistic tone.
On clean channels it is advisable to set the gain (or volume)
to a setting of no less than one quarter maximum so as not to
get unrealistic results due to any volume dependent tonal
shaping on the amplifier preamp.
Setting Up
ENGLISH
Produktspecifikationer
| Varumärke: | Marshall |
| Kategori: | gitarrförstärkare |
| Modell: | RG-1 Regenerator |
Behöver du hjälp?
Om du behöver hjälp med Marshall RG-1 Regenerator ställ en fråga nedan och andra användare kommer att svara dig
gitarrförstärkare Marshall Manualer
14 Juni 2025
gitarrförstärkare Manualer
Nyaste gitarrförstärkare Manualer
15 Juni 2025