Martin Audio MA1.3 Bruksanvisning


Läs gratis den bruksanvisning för Martin Audio MA1.3 (24 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 1.5 recensioner. Har du en fråga om Martin Audio MA1.3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/24
Martin Audio – MA1.3 Power Amplifier
CONTENTS (ENGLISH) Page No
1 UNPACKING 2
2 WARNINGS 2
3 USER RESPONSIBILITY 3
3.1 Speaker damage 3
3.2 Shock hazard 3
3.3 Radio interference 3
4 INTRODUCTION 4
4.1 Front panel 4
4.2 Rear panel 5
5 INSTALLATION 6
5.1 Mounting 6
5.2 Cooling 6
5.3 Operating voltage 6
5.4 Grounding 7
5.5 Power consumption 7
5.6 Input connections 8
5.7 Connecting speakers 11
6 OPERATION MODES 11
6.1 Stereo operation 11
6.2 Tandem mono 12
6.3 Bridged mono 12
6.4 Stereo reverse 13
7 OPERATION 13
7.1 Operation precautions 13
7.2 Powering up - Soft start 14
7.3 Input attenuators 14
7.4 Gain switch 14
7.5 Indicators 14
8 PROTECTION FEATURES 15
9 DESIGN FEATURES 16
10 SPECIFICATIONS 18
11 APPENDIX A 19
12 MAINTENANCE 20
13 WARRANTY 21
14 TECHNICAL SPECIFICATIONS 22
MARTIN AUDIO
LONDON
The Martin Experience
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES
1 UNPACKING
Each Martin Audio MA Series amplifier is built to the highest standard and
thoroughly inspected before it leaves the factory. After unpacking the unit,
examine it carefully for any signs of transit damage and inform your dealer
if such damage is found. It is suggested that you retain the original
packaging so that the unit can be repackaged at a future date if necessary.
Please note that Martin Audio and its distributors cannot accept
responsibility for damage to any returned product through the use of
non-approved packaging.
2 WARNINGS
Do not use this amplifier if the mains cable is damaged.
Always operate the amplifier with the chassis ground wire connected
to the electrical safety earth.
Do not parallel or series connect an amplifier output with any other
amplifier output. Do not connect the amplifier output to any other
voltage source, such as battery, mains source or power supply,
regardless of whether the amplifier is turned on or off.
Do not run the output of any amplifier back into another channel's input.
Do not block the air intake or exhaust ports.
Do not operate the amplifier near any source of heat.
Do not spill water or other liquids into or on the unit.
Do not operate the amplifier if liquid ingress is suspected.
Do not remove top or bottom covers. Removal of the covers will
expose hazardous lethal voltages and may void warranty.
There are no user serviceable parts inside the amplifier.
Refer servicing to qualified personnel only.
Keep this manual for future reference.
Martin Audio – MA1.3 Power Amplifier
ENGLISH
2
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.
Standards Applied EMC Emission EN55103-1:1996
Immunity EN55103-2:1996
Electrical Safety EN60065:1993
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES


Produktspecifikationer

Varumärke: Martin Audio
Kategori: ej kategoriserat
Modell: MA1.3

Behöver du hjälp?

Om du behöver hjälp med Martin Audio MA1.3 ställ en fråga nedan och andra användare kommer att svara dig