Martin ERA 150 Wash Bruksanvisning
Läs gratis den bruksanvisning för Martin ERA 150 Wash (56 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om Martin ERA 150 Wash eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/56

ERA 150 Wash
User Guide

©2021-2022 HARMAN PROFESSIONAL DENMARK ApS. All rights reserved. Features,
specications and appearance are subject to change without notice. HARMAN
PROFESSIONAL DENMARK ApS and all aliated companies disclaim liability for any injury,
damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by
the use of, inability to use or reliance on the information contained in this document. Martin is a
registered trademark of HARMAN PROFESSIONAL DENMARK ApS registered in the United
States and/or other countries.
HARMAN PROFESSIONAL DENMARK ApS, Olof Palmes Allé 44, 8200 Aarhus N, Denmark
HARMAN PROFESSIONAL SOLUTIONS U.S., 8500 Balboa Blvd., Northridge CA 91329, USA
www.martin.com
ERA 150 Wash User Guide Revision B

Table of contents
Safety information 4................................................................................
Introduction ......................................................................................... 10
Before using the product for the rst time .................................. 10
Fixture overview ................................................................................. 11
Physical installation ............................................................................ 12
Avoiding damage from other light sources ................................. 12
Fastening the xture to a at surface ......................................... 12
Mounting the xture on a truss ................................................... 13
AC power ............................................................................................ 15
Linking xtures to power in a chain ............................................ 15
Connecting to da ta ............................................................................. 17
Connecting the DMX data link .................................................... 17
Fixture setup ....................................................................................... 18
Using the control menus ............................................................ 18
DMX address setting .................................................................. 19
Pan/tilt inversion ......................................................................... 19
Pan/tilt speed ............................................................................. 20
Raw, extended and calibrated modes ........................................ 20
Tungsten emulation mode ......................................................... 20
Dimming curves ......................................................................... 21
Dimming speed and smoothness ............................................... 21
Blackout or Hold if DMX signal stops ......................................... 21
Cooling mode ............................................................................. 22
Display rotation .......................................................................... 22
Display intensity ......................................................................... 23
Temperature units ...................................................................... 23
Resetting to factory defaults ...................................................... 23
Fixture test ................................................................................. 23
Fixture information ..................................................................... 24
DMX Live ................................................................................... 25
Resetting the xture ................................................................... 25
Manual control ........................................................................... 26
Disabling pan and tilt feedback .................................................. 26
Control / Settings DMX channel ................................................. 26
Eects ................................................................................................ 28
RDM ................................................................................................... 30
Maintenance ....................................................................................... 32
Cleaning ..................................................................................... 32
Uploading new rmware ............................................................ 33
Service and repairs .................................................................... 35
DMX protocol ...................................................................................... 36
Control menus .................................................................................... 40
Troubleshooting .................................................................................. 45
Dimensions ......................................................................................... 46
Pan/tilt and zoom orientation guide .................................................... 47
Specications ..................................................................................... 50
Produktspecifikationer
Varumärke: | Martin |
Kategori: | Lättnad |
Modell: | ERA 150 Wash |
Behöver du hjälp?
Om du behöver hjälp med Martin ERA 150 Wash ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Martin Manualer
29 December 2024
18 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
10 September 2024
10 September 2024
10 September 2024
10 September 2024
Lättnad Manualer
- Massive
- SLV
- EXO
- Omnitronic
- Ledar
- DeWalt
- Light & Motion
- Wentronic
- Schneider
- Lexon
- Pegasi
- SIIG
- Ansmann
- Näve
- Futurelight
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025