Master Lock 1566 Bruksanvisning


Läs gratis den bruksanvisning för Master Lock 1566 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om Master Lock 1566 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1. Plug Administration Key into the micro USB port located at the bottom of the Keypad Module (A)
2. Press the Administration Key button to put lock into Settings Mode (Settings icon will appear) (B)
3. Locker Check – Open locker and check. This function does not change current code
• Press "0" button to unlock
• Press "0" button to lock
4. Lock Reset – Open locker and clear current code
• Press “X” to clear current code (lock will be set to Unlocked Mode)
Note: If the lock is in Single-User Mode, the dashes on the display screen will flash
until a new code is entered
5. Change function of lock:
Lock Settings
• Press “1 for Single-User Mode (Single-User icon will appear) (C)
Note: Once the Single-User Mode is enabled the dashes on the display screen willash
until a code has been entered
• Press “2for Multi-User Mode
• Press “3for Bluetooth Mode (Bluetooth icon will appear) (D)
Note: Multi-User and Single-User Mode will be disabled when Bluetooth Mode is on.
Bluetooth Mode will only be available with Bluetooth Lock
Code Length
• Press “4” for “4 digit code length” (4 dashes will be visible) (E)
• Press “5for “5 digit code length” (5 dashes will be visible) (F)
• Press “6for “6 digit code length” (6 dashes will be visible) (G)
Sound Select
• Press “7to turn “Sound Off
• Press “8to turn “Sound On”
Reset to Factory Default Settings
• Press “9” and hold for 5 seconds to reset lock to factory default settings
6. Press button on keypad to exit Settings Mode once changes are made
Note: After 30 seconds, Settings Mode will timeout
Note:
Factory default settings for 3685
1. Unlocked
2. Multi-User Mode
3. 4-digit code length
4. Sound on
7. Remove Administration Key when changes are complete
123
456
789
X 0
Administration Key Instructions Directives pour la clé
dadministration Instrucciones de la Llave de administración
Electronic Built-In Lock Serrure électronique intégrée Cerradura electrónica integrada
3681 • 3685
123
456
789
X 0
123
456
789
X 0
(A)
(B)
(C)
(D)
continued on other side / continué a l’autre côté / continuado al otro lado
Factory default setting for 3681 (Bluetooth Lock)
1. Unlocked
2. Bluetooth Mode enabled
3. Sound on
1. Branchez la cd’administration dans le port USB micro situé au fond du module du clavier (A)
2. Appuyez sur la touche Clé d’administration pour mettre la serrure en mode Réglages (l’ine Réglages s’affiche) (B)
3. Vérication du casier – ouvrez le casier et vérifiez. Cette fonction ne modifie pas le code actuel
• Appuyez sur le « 0 » pour déverrouiller
• Appuyez sur le « 0 » pour verrouiller
4. Réinitialisation de la serrure – ouvrez le casier et effacez le code actuel
• Appuyez sur « X » pour effacer le code actuel (la serrure passera au mode Déverrouillée)
Remarque : Si la serrure est en mode Utilisateur unique, les tirets se trouvant sur l’écran d’affichage clignotent
jusqu’à ce qu’un nouveau code soit saisi
5. Modifiez la fonction de la serrure :
P53150


Produktspecifikationer

Varumärke: Master Lock
Kategori: Inte kategoriserad
Modell: 1566

Behöver du hjälp?

Om du behöver hjälp med Master Lock 1566 ställ en fråga nedan och andra användare kommer att svara dig