MB Quart MBTAC-SUB-1 Bruksanvisning

MB Quart Subwoofer MBTAC-SUB-1

Läs gratis den bruksanvisning för MB Quart MBTAC-SUB-1 (13 sidor) i kategorin Subwoofer. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om MB Quart MBTAC-SUB-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/13
Installation Instructions
Description:
Dual 10” Subwoofer Enclosure
2016 - 2023 Toyota Tacoma (Third Generation)
Part Number:
MBTAC-SUB-1
Assembly Time:
120 Min (2-Hours)
Tools Required (May Vary on Application)
1 Bojo or Panel Tool
2 10mm, 14mm Socket
3 Ratchet
4 1/8”, 1/4” Drill Bit
5 Drill
6 Cutting Tool
7 T20 Torx Driver
It is always best practice to disconnect your negative battery terminal prior to any electronics installations to
avoid damaging the vehicles electrical system. Before you begin, read through these instructions and check
that all parts are present.
This installation may require specials skills and tools to complete, it may be necessary to seek a trained
installation technician to complete this installation. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
TS1-2810 Parts List
No. Component Name Qty
1 Dual 10” Subwoofer Assembly 1
2 ST4.2 x 19mm High / Low Screw 8
3 ST4.8 x 32mm High / Low Screw 4
4 M5 Washer 4
5 M6 x 30mm Hex Bolt with Threadpatch 4
6 M6 Washer 4
7 M6 Spead Clip 2
8 EVA Foam 1
9 Adhesive Pad 1
10 Drill Template -
Page 1 of 13
Disassembly
● Flip rear seat bottoms up.
● Flip seat backs down.
● Remove (3) headrest from
rear seat.
Page 2 of 13


Produktspecifikationer

Varumärke: MB Quart
Kategori: Subwoofer
Modell: MBTAC-SUB-1

Behöver du hjälp?

Om du behöver hjälp med MB Quart MBTAC-SUB-1 ställ en fråga nedan och andra användare kommer att svara dig