Megaman L0502CB Bruksanvisning
Läs gratis den bruksanvisning för Megaman L0502CB (7 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 12 recensioner. Har du en fråga om Megaman L0502CB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
We apologise for any text or photo errors and any changes of
technical data.
If you have any questions concerning technical problems please
contact our Customer Service Department.
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk and click
on customer service.
Internet: www.clasohlson.co.uk
Lamp module x 2
Connecting parts x 3
Mains lead (2 metres)
Connecting adaptor
Attachment clips
Lightning Set
Art.no. 36-2425
Model: L0502CB
Please read the entire instruction manual before using and save
it for future use.
Product Description
Lightning Set with energy saving lamps.
- The modules can be connected with the included adaptor.
- Several possible combinations.
- For 230 V Mains cord
Comes with
2 lamps (not pictured)
Switch module x 1
Safety
- All installation of electrical products must be preformed
correctly to avoid danger to life. The installation should
only be performed by persons with knowledge of electrical
wiring. If unsure, contact a qualied electrician.
- The product is made only for use indoors.
- The product may not be mounted so it is exposed to
moisture or humidity.
- Use only the included or recommended power cable.
Installation
The modules can be combined by desire according to gure A
and B.
4. Secure the modules with help of the included attachment
clips stored underneath the modules (see gure D).
Remove the attachment clips that are not being used.
5. Install the module in desired place. Screw the included
screws in the holes underneath the lamps.
6. Insert the lamps in the light module. Place the lamps
according to gure A and turn gently anticlockwise until the
lamps lock.
7. Put the power cable in the switch module according to
gure C.
Figure A
Figure B
8. Connect the power cable plug into a wall socket.
9. Light up the lamp by pressing the switch on the switch
module.
Care and Maintenance
- Use a soft damp cloth to wipe the product.
- Always unplug when cleaning or moving the light module.
Disposal
Follow local ordinances when disposing of this product. If you
are unsure about how to dispose of this product contact your
municipality.
Specications
Total length: 545 mm
Width: 80 mm
Thickness: 24 mm
Colour: White
Material: Plastic
Sealing class: IP20
Operating voltage: 230 V AC, 50 Hz
Lamp: Max 9 W GX53 low energy lamp
1. Always disconnect the power cable from the mains and light
tting before the installation.
2. Remove the included adaptors from the bottom side of the
modules.
3. Connect desired modules together with the adaptors
according to gure C. Remove the adaptors not being used.
Figure C
Figure D
EN
F
Ver. 001-200710
Produktspecifikationer
| Varumärke: | Megaman |
| Kategori: | Lättnad |
| Modell: | L0502CB |
Behöver du hjälp?
Om du behöver hjälp med Megaman L0502CB ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Megaman Manualer
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
13 September 2024
13 September 2024
13 September 2024
13 September 2024
13 September 2024
Lättnad Manualer
- Duronic
- Lume Cube
- Makita
- Generac
- Blackburn
- Rademacher
- Insatech
- Karwei
- Watshome
- XQ-Lite
- Infinity
- Näve
- EXO
- Sea&Sea
- Nexa
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025