Megasat ST-25 FP Bruksanvisning
Sidor 2 kassaskåp
Läs bruksanvisningen för Megasat ST-25 FP gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 25 gånger. Fråga om modellen? Ställ en fråga
Security safe with ngerprint scanner (FP series)
Please emergency key
do not store in a safe
Schematic view of the safeSchematic view of the control panel
1. Registration button
(Model-dependent)
2. Locking bolt
3. Battery compartment
4. Number keys
5. Door handle
6. Fingerprint scanner
7. Unlocking button
8. Emergency unlocking cover
• Locks: with high quality anti-drill locking bolts - especially theft-proof.
• Registration scanner: ngerprint registration or ngerprint data deletion
• Unlock key: Opens the safe
• Fingerprint scanner: Fingerprint enrolment
• Separate numeric keys on the control panel for entering codes (1, 2, 3, 4)
• Key for code registration („1“) Depending on the model, in the battery compartment or in the side door
• Cover: remove the cover and open the safe using the emergency lock
• Power supply: 4x AA batteries
• Remove the emergency lock cover
• Insert the emergency key into the lock and turn it clockwise.
• Now turn the door handle clockwise and open the door.
When you use the safe for the rst time or if you forget the code or ngerprint is not recognised, you can use
the emergency key to open the safe.
Press the registration key (registration key) for approx. 5 seconds, the green indicator lamp will icker (approx.
12 times). While doing so, hold the emergency key in the unlocking position. Release the key again when the
patching has stopped. A long „tick“ can be heard, all ngerprints and codes are deleted and the data set at the
factory are loaded. (code 1234)
ATTENTION: If the key is lost, it can only be re-ordered (for security reasons) using the serial number on the
inside of the safe. Please note this number in a safe place. If the key is lost and the code and serial number are
unknown, the safe can only be opened by force.
• Do not use liquid cleaners or sprays to clean the safe.
• Use a damp cloth instead.
• Do not place the product on unsafe and elevated objects to prevent it from falling down and injuring the product
or people.
• Never spill liquid on the control panel, as it may cause electrical damage to the electronic components and aect
their proper functioning.
• Never attempt to disassemble the product yourself. Improper disassembly and damage to the inside and rear
panel, can damage the electrical circuitry and aect its proper function.
• If maintenance is required, please contact your local service centre or local dealer.
• The ST series is a high-tech product for better security.
• Use the ngerprint instead of a key for greater convenience
• A maximum of 20 ngerprints can be registered
• Constructed of solid material - protected against hand and power tools
• User-friendly product design - unique structure
FUNCTIONS
EMERGENCY KEY
DELETE SYSTEM INITIALISATION
IMPORTANT NOTES
FEATURES
ATTENTION:For your absolute security, please pay attention to the emergency key and keep the key in a secret
place.
Version: 1.2 May 2023 // Technical changes, printing errors and mistakes reserved.
Conformity information:
Megasat Werke GmbH hereby declares that the following equipment is in conformity with the essential require-
ments and the other relevant provisions of Directive EMV 2014/30/EU:
Megasat ST-20 FP (Art-No. 0900088) / Megasat ST-30 FP (Art-No. 0900089) / Megasat ST-50 FP (Art-No. 0900090)
The declaration of conformity for these products is available:
Megasat Werke GmbH, Brückenstraße 2a, D-97618 Niederlauer.
You can download the declaration of conformity from our homepage: www.megasat.tv/support/downloads
Megasat Werke GmbH - Brückenstraße 2a - 97618 Niederlauer
Produktspecifikationer
| Varumärke: | Megasat |
| Kategori: | kassaskåp |
| Modell: | ST-25 FP |
Behöver du hjälp?
Om du behöver hjälp med Megasat ST-25 FP ställ en fråga nedan och andra användare kommer att svara dig