Meliconi Pratico 2.1 Bruksanvisning
Meliconi
Fjärrkontroll
Pratico 2.1
Läs gratis den bruksanvisning för Meliconi Pratico 2.1 (6 sidor) i kategorin Fjärrkontroll. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 8.5 recensioner. Har du en fråga om Meliconi Pratico 2.1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
Pratico 2.1
Thank you for choosing a Meliconi remote control.
The Pratico 2.1 remote control is designed to command and a DECODER (satellite or digital terrestriala TV ).
IMPORTANT! When the remote control is set to control only device (example: TV), all the buttons will control that one
device; whilst when it is set to control 2 devices (TV + DECODER), e buttons will control the TV, only th V+ V-
whilst the other buttons will control the DECODER. (see chapter COMBINED KEYPAD)
Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (included in the
package) in order to download the latest information to its activation.
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio
frequency (e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V alkaline batteries, not included in the AAA/LR03
package. Insert with the correct polarity as shown in gure.
DO NOT use batteries. rechargeable
BATTERIES TEST: Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is o or blinks, the inserted batteries are low,
therefore they need replacement.
WARNING:
As the remote control is capable of controlling 2 devices, during setup you must select the operation mode then dene which ;
device you want to control. (TV / STB)
To select the operation mode, press the button quickly and repeatedly until the LED corresponding to
the device you want to operate is switched on. ( led / led) TV = red STB = green
Before using the remote control, for each device you wish to control, it is to set a it matched. essential specic code,
Identify the specic code and set it into the remote control using one of the following ways:
MANUAL
SEARCH
SMARTPHONE
TABLET - WEB
ACTIVATION OF REMOTE CONTROL
SELECTION OF OPERATING MODE
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, re
or the like.
The product . Keep out of reach of children or domestic animals. is not a toy
Keep this booklet for future reference
Produktspecifikationer
| Varumärke: | Meliconi |
| Kategori: | Fjärrkontroll |
| Modell: | Pratico 2.1 |
Behöver du hjälp?
Om du behöver hjälp med Meliconi Pratico 2.1 ställ en fråga nedan och andra användare kommer att svara dig
Fjärrkontroll Meliconi Manualer
4 Februari 2025
3 Februari 2025
1 Februari 2025
8 Januari 2025
23 September 2024
22 September 2024
18 September 2024
18 September 2024
9 September 2024
9 September 2024
Fjärrkontroll Manualer
- Neets
- Provision
- HQ
- Trust
- Scosche
- Voxx
- Kenwood
- Eminent
- Extron
- CGV
- MIOPS
- Sitecom
- Pentatech
- Gewiss
- IKEA
Nyaste Fjärrkontroll Manualer
9 April 2025
4 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
1 April 2025
31 Mars 2025
31 Mars 2025
30 Mars 2025