Mellerware 20800A Bruksanvisning

Mellerware Gräsklippare 20800A

Läs gratis den bruksanvisning för Mellerware 20800A (31 sidor) i kategorin Gräsklippare. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 16 recensioner. Har du en fråga om Mellerware 20800A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/31

Model:

20800A

complies with

INTERNATIONAL

IEC60335

SAFETY SPECIFICATIONS

10W

SWIFT 10W

Hair clipper set

Dear customer,

Thank you for choosing to purchase a Mellerware

brand product. Thanks to its technology, design and

operation and the fact that it exceeds the strictest qual-

ity standards, a fully satisfactory use and long product

life can be assured.

1. Parts description

1. Hair cutting unit

2. Blade lever

3. On / off switch

4. upper blade

5. lower blade

6. Guide combs (3 mm, 6 mm, 9 mm, 12 mm)

7. Comb

8. Scissors

9. Oil

10. Brush

11. Blade cover

2. Safety advice and warnings!

Read these instructions carefully before switching

on the appliance and keep them for future reference.

Failure to follow and observe these instructions could

lead to an accident. Clean all the parts of the product

that will be in contact with head, as indicated in the

cleaning section, before use.

2.1. Use or working environment:

2.1.1. Keep the working area clean and well lit. Clut-

tered and dark areas invite accidents.

2.1.2. Use the appliance in a well ventilated area.

2.1.3. Do not place the appliance on hot surfaces, such

as cooking plates, gas burners, ovens or similar items.

2.1.4. Keep children and bystanders away when using

this appliance.

2.1.5. Place the appliance on a horizontal, flat, stable

surface away from other heat sources.

2.1.6. Do not use the appliance in association with a

programmer, timer or other device that automatically

switches it on.

2.1.7. Do not use the appliance if the cable or plug is

damaged.

2.1.8. Ensure that the voltage indicated on the rating

label matches the mains power supply voltage before

plugging in the appliance.

2.1.9. Connect the appliance to the mains power sup-

ply with an earth socket withstanding a minimum of 10

amperes.

2.1.10. The appliance’s plug must fit into the mains

power supply socket properly. Do not alter the plug.

2.1.11. If using a multi plug check ratings carefully as

the current used by several appliances could easily

exceed the rating of the multi plug.

2.1.12. If any of the appliance casings breaks, imme-

diately disconnect the appliance from the mains power

supply to prevent the possibility of an electric shock.

2.1.13. Do not use the appliance if it has fallen on the

floor or if there are visible signs of damage.

2.1.14. Do not force the power cord. Never use the

power cord to lift up, carry or unplug the appliance.

2.1.15. Do not wrap the power cord around the appli-

ance.

2.1.16. Do not clip or crease the power cord.

2.1.17. Do not allow the power cord to hang or to

come into contact with the surfaces.

2.1.18. Check the state of the power cord. Damaged or

tangled cables increase the risk of electric shock.

2.1.19. Power cord should be regularly examined for

signs of damage, and if the cord is damaged, the appli

ance must not be used.

3mm

9mm

6mm

12mm

2.2. Personal safety:

2.2.1. CAUTION: Do not leave the appliance unattended

during use as there is a risk of an accident.

2.2.2. This appliance is only for domestic use, not for

industrial or professional use. It is not intended to be

used by guests in hospitality environments such as

bed and breakfast, hotels, motels, and other types of

residential environments, even in farm houses, offices

and other work environments.

2.2.3. This appliance is not intended for use by

persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervi-

sion or instruction concerning use of the appliance by

a person responsible for their safety.

2.2.4. This appliance is not a toy. Children should be

supervised to ensure that they do not play with the

appliance.

2.3. Use and care:

2.3.1. Fully unroll the appliance’s power cable before

each use.

2.3.2. Do not use the appliance if the parts or acces-

sories are not properly fitted.

2.3.3. Unplug the appliance from the mains power

supply when not in use and before undertaking any

cleaning task.

2.3.4. This appliance should be stored out of reach

of children.

2.3.5. Do not store the appliance if it is still on/hot.

2.3.6. Never leave the appliance unattended when in

use and keep out of the reach of children.

2.3.7. If, for some reason, the appliance were to catch

fire, disconnect the appliance from the mains power

supply and DO NOT USE WATER TO PUT THE FIRE

OUT.

2.4. Service:

2.4.1. Make sure that the appliance is serviced only

by suitably qualified technician, and that only original

spare parts or accessories are used to replace existing

parts/accessories.

2.4.2. If the power cord is damaged, the manufacturer

or its service agent or a similarly qualified person must

replace it in order to avoid a hazard.

2.4.3. Any misuse or failure to follow the instructions

for use renders the guarantee and the manufacturer’s

liability null and void.

3. Instructions for use

3.1. Before use:

3.1.1. Remove the appliance’s protective film(if ap-

plicable).

3.1.2. Before using the product for the first time, clean

the parts that will come into contact with your head in

the manner described in the cleaning section.

3.2. Aligning your blades:

3.2.1. Your clippers were carefully examined to ensure

that the blades were oiled and aligned before leaving

the factory.

3.2.2. Blades must be realigned if they have been

removed for cleaning or replacement.

3.2.3. To realign the blades, each upper blade tip

should be in line with the corresponding lower blade

tip.

(The bottom blade’s teeth tips should be approximately

1.2mm below the top blade’s teeth tips.)

3.2.4. If blade alignment is incorrect, add a few drops

of oil to the blades, switch on the clipper for a few

seconds, switch off and unplug. Loosen the screws

slightly and adjust. Tighten the screws again after the

blade is aligned.

3.2.5. To change the blades, use a Phillips screw driver

to loosen the 2 screws.

3.2.6. Remove blade and replace it with a new blade.

3.2.7. Align the top blade then place the bottom blade

over the top blade and insert the screws and tighten

slightly.

3.2.8. Align the bottom blade as explained above and

tighten the screws further to secure the bottom blade

in place.

3.3. Oiling your clipper blades

3.3.1. To keep your clipper in peak condition, the

blades should be oiled before every use.

3.3.2. Do not use hair oil, grease, and oil mixed with

kerosene or any other solvent. The solvent will evapo-

rate and leave a thick layer of oil which may slow down

the blade’s motion.

1.2mm

Produktspecifikationer

Varumärke:	Mellerware
Kategori:	Gräsklippare
Modell:	20800A
Färg på produkten:	Wit
Vikt:	- g
Original bildförhållande:	4:3
Synlig skärmhöjd (h):	1828 mm
Synlig skärmbredd (b):	2438 mm
Diagonal:	120 "
Skärmens totala storlek (höjd x bredd):	- cm
Schermgain:	1.1