Metra 95-6532B Bruksanvisning
Metra
Inte kategoriserad
95-6532B
Läs gratis den bruksanvisning för Metra 95-6532B (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6 recensioner. Har du en fråga om Metra 95-6532B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 9/23/2015 INST95-6532B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 95-6532B
• A) Radio trim panel • B) Radio brackets • C) (4) White panel clips
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: • 40-EU55 Amplified antenna adapter
• Panel removal tool • Phillips screwdriver
• Torx driver
;663:9,8<09,+
Jeep Renegade 2015-up
95-6532B
A B
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
Table of Contents
• ISO DDIN radio provision
• Painted to match factory finish
20;-,(;<9,:
C
95-6532B
2
Dash Disassembly
Unclip and remove the trim panel
surrounding the factory radio.
(Figure A)
Remove (4) T-20 Torx Screws
securing the radio. (Figure B)
Unplug and remove the radio.
Cut shaded area at the top of the
radio cavity. (Figure C)
Continue to kit assembly
(Figure A)
(Figure B)
(Figure C)
Remove
shaded
area
95-6532B
3
Kit Assembly
ISO DDIN radio provision
1. Attach the (4) supplied white panel
clips radio housing to the .
(Figure A)
2. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in the
reverse order of disassembly using
the 6532 instead radio trim panel
of the factory radio panel.
(Figure A) (Figure B)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 95-6532B |
Behöver du hjälp?
Om du behöver hjälp med Metra 95-6532B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Bigben
- T-Rex
- Aquatic AV
- USL
- Ergotron
- Petite Chérie
- Singularity Computers
- Victor Technology
- Sonicware
- The T.bone
- Oregon Scientific
- Diamond Audio
- Start International
- SMS
- Waterbird
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025