Metra 95-8153 Bruksanvisning

Metra Bilsats 95-8153

Läs nedan 📖 manual på svenska för Metra 95-8153 (8 sidor) i kategorin Bilsats. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

INSTALLATION INSTRUCTIONS FOR PART 95-8153

APPLICATIONS

LEXUS LS SERIES

1995-2000

NOT FOR USE IN VEHICLES WITH FACTORY

NAVIGATION

KIT FEATURES

• Double DIN Radio Provision

• Stacked ISO Mount Units Provision

A) Double DIN Radio Housing B) Double DIN Brackets

KIT COMPONENTS

TOOLS REQUIRED:

Small Flat Blade Screwdriver/ Panel Removal Tool

• Phillips Screwdriver • Socket Set

1-800-221-0932

www.metraonline.com

95-8153

Dash Disassembly

Lexus LS Series 1995-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Kit Assembly

- Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

- Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Final Assembly . 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TABLE OF CONTENTS

95-8153

*Note:

Refer also to the instructions included with the aftermarket radio.

95-8153 DASH DISASSEMBLY

LEXUS LS SERIES 1995-2000

1 2 3 4 5 6

SCAN P.SCAN

TUNE

SEEK

TRACK

BASS MID TREBLE BALANCE FADER

FM1/2

TAPE

TEMP TEMP

FRONT REAR A/C

OFF AUTO MODE DUAL

PASSENGER

1 2 3 4 5 6

SCAN P.SCA N

TUNE

SEEK

TRACK

BASS MID TREBLE BALANCE FADER

FM1/2

TAPE

TEMP TEMP

F RONT REAR A/C

OFF AUTO MODE DUAL

PASSENG ER

ONE SCREW

ON EACH

SIDE

Disconnect the negative battery ter-

minal to prevent an accidental short

circuit.

Starting at rear of panel surrounding

the shifter carefully pry up and out to

remove entire panel including ashtray.

(

Figure A)

Using a panel removal tool or small

flat blade screwdriver gently pry out

on the top of the A/C vent assembly

(including clock) and remove.

(Figure B)

Remove (4) screws securing the fac-

tory radio/climate control assembly.

Unplug and remove the assembly.

(Figure C)

Remove (2) screws securing factory

climate control to the assembly.

Remove the climate control from the

assembly and retain it for re-use dur-

ing kit assembly. (

Figure D)

Continue to kit assembly.

Produktspecifikationer

Varumärke:	Metra
Kategori:	Bilsats
Modell:	95-8153
Vikt:	22 g
Bredd:	18 mm
Höjd:	128 mm
Användarmanual:	Ja
Färghandtag:	Black, Yellow
Certifiering:	CE, GS, DVE
Ergonomisk design:	Ja
Längd:	18 mm
Material på handtaget:	Kunststof
Typ produkt:	Enkele
Antal skruvmejslar:	1
Typ skruvmejsel:	Precisieschroevendraaier
Skruvmejselbitar storlek:	1460 ESD
Antal slaghylsor:	1
Hantera isolering:	Ja
Bitshållare:	Ja
Materialhållare:	Metaal