Metra 99-6535B Bruksanvisning
Metra
Inte kategoriserad
99-6535B
Läs gratis den bruksanvisning för Metra 99-6535B (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5.5 recensioner. Har du en fråga om Metra 99-6535B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
REV. 11/15/2017 INST99-6535B
INSTALLATION INSTRUCTIONS FOR PART 99-6535B
METRA. The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
U.S. PATENT # D788,095
• ISO DIN radio provision with pocket
• Painted matte black
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: • 40-EU55
• Panel removal tool • Cutting tool
• T-25 Torx screwdriver
;663:9,8<09,+
Fiat 500X 2016-up
99-6535B
A
Table of Contents
BCD
Dash Disassembly ................................................. 2
Kit Assembly .......................................................... 3
99-6535B
2
Dash Disassembly
1. Open upper storage compartment
on passenger side. (Figure A)
2. Unclip, unplug, and remove painted
hazard button panel below the radio.
(Figure A)
3. Unscrew (2) T-25 Torx screws at the
bottom of the radio trim. (Figure B)
4. Unclip the radio trim. (Figure B)
5. Unscrew (4) T-25 Torx screws
securing the radio into the dash.
(Figure C)
6. Unplug and remove the radio from
the dash. (Figure C)
7. Cut the shaded areas in the dash
cavity to gain suitable depth for the
new radio chassis (CAUTION: The
vents are located directly behind the
area to be cut, use extreme caution
to not cut into them). Be careful, you
may want to make multiple cuts.
(Figures D, E)
Continue to Kit Assembly
(Figure A)
(Figure C)
(Figure B)
(Figure E)
(Figure D)
Be careful not to cut
into the vents!
First cut
Second cut
Remove shaded area
Remove shaded area
99-6535B
3
Kit Assembly
(Figure C)
(Figure B)
(Figure A)
ISO DIN radio provision
1. Attach the pocket radio to the
brackets using the (4) supplied
#8 x 3/8” Phillips screws. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly, and secure it using
screws supplied with the radio.
(Figure B)
4. Insert the radio trim panel into the
factory radio trim removed in step
4 of dash disassembly. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash, complete all necessary
connections to the radio and test
the radio for proper operation.
Metra recommends using the
proper mating adapter from
Metra and/or AXXESS.
6. Mount the radio into the dash
using the factory hardware.
7. Reassemble the dash in the
reverse order of disassembly.
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 99-6535B |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-6535B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Roco
- Yealink
- Marshall
- OLLO
- Livington
- Doepke
- Creative
- Gembird
- Nvidia
- FireKing
- Micsig
- Masport
- Boori
- BeSafe
- Adventuridge
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025