Metra 99-7345B Bruksanvisning

Metra Bilsats 99-7345B

Läs gratis den bruksanvisning för Metra 99-7345B (8 sidor) i kategorin Bilsats. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8.5 recensioner. Har du en fråga om Metra 99-7345B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7345B
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-7304 - Hyundai/Kia 2010-up
Antenna Adapter:
• Not Required
Panel Removal Tool • Phillips Screwdriver • Socket Wrench
TOOLS REQUIRED
Kia Optima 2011-up
99-7345B
B C D
E
A
A) Brackets B) Trim Panel • C) Pocket D) (3) #8 x 3/8” Pan Head Phillips Screws
• E) (4) #8 x 3/8” Truss Head Phillips Screws
KIT FEATURES
KIT COMPONENTS
• ISO DIN head unit provision with pocket
Painted matte black to match factory finish
Table of Contents
Dash Disassembly
– Kia Optima 2011-up 3-4
Kit Assembly
– Vent transfer 5
– ISO DIN head unit provision with pocket 6
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
99-7345B
Caution
Metra recommends disconnecting the negative battery terminal before beginning any
installation. All accessories, switches, and especially air bag indicator lights must be
plugged in before reconnecting the battery or cycling the ignition.
*NOTE: Refer also to the instructions included with the aftermarket radio.
1. Unsnap and remove trim from around
top center to passenger side dash.
(Figure A)
2. Unsnap panel from outside edge of
driver’s side dash. (Figure B)
3. Remove two screws from knee panel
and pull top of panel back so it doesn’t
overlap the instrument cluster.
(Figure C)
4. Remove two screws from the driver’s
side vent trim and remove. (Figure D)
Continued on next page
3
Dash Disassembly
99-7345B
(Figure B)
(Figure A)
(Figure C)
(Figure D)

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 99-7345B

Behöver du hjälp?

Om du behöver hjälp med Metra 99-7345B ställ en fråga nedan och andra användare kommer att svara dig