Metra 99-7359B Bruksanvisning
Läs gratis den bruksanvisning för Metra 99-7359B (8 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7.5 recensioner. Har du en fråga om Metra 99-7359B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 7/3/2014 INST99-7359B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 99-7359B
• ISO DIN radio provision with pocket
•
Painted matte black to match factory finish
• A) Radio housing trim panel • B) Brackets • C) Pocket • D) (8) #8 x 3/8” pan-head Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 Hyundai/Kia 2010-up
• HYBL-04 Hyundai/Kia 2010-up (Premium Sound and BlueLink)
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
A B C D
Dash Disassembly
– Kia Optima 2014-up ............................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-7359B
Dash Disassembly
1. Unsnap and remove trim from
around top center to passenger
side dash. (Figure A)
2. Unsnap panel from outside edge of
driver’s side dash. (Figure B)
3. Remove (2) screws from knee
panel and pull top of panel back so
it doesn’t overlap the instrument
cluster. (Figure C)
4. Remove (2) screws from the
driver’s side vent trim and remove.
(Figure D)
(Figure B) (Figure F)
(Figure C) (Figure G)
(Figure D)
(Figure A)
(Figure H)(Figure E)
5. Remove (4) screws from
instrument cluster and remove.
(Figure E)
6. Remove (4) screws from the
climate controls and remove.
(Figure F)
7. Remove (6) screws securing the
radio trim panel and remove.
(Figure G)
8. Remove (4) screws securing the
factory radio chassis and remove
it. (Figure H)
Continue to kit assembly
99-7359B
Kit Assembly
ISO DIN radio provision with pocket
1. Mount the pocket to the brackets
using the supplied (4) #8 x 3/8”
Phillips screws. (Figure A)
2. Mount the aftermarket radio to the
brackets with the screws supplied
with the radio. (Figure B)
3. Using the supplied (4) #8 x 3/8”
Phillips screws mount the radio/
bracket/pocket assembly to the
radio trim panel. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
(Figure A) (Figure B) (Figure C)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | mottagare |
| Modell: | 99-7359B |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-7359B ställ en fråga nedan och andra användare kommer att svara dig
mottagare Metra Manualer
18 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
mottagare Manualer
- Kathrein
- Sangean
- Zalman
- Polsen
- Rega
- Hartke
- Reely
- Philips
- Mosconi
- Manley
- Manhattan
- Velleman
- HQ Power
- CYP
- Edwards Signaling
Nyaste mottagare Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025