Metra 99-7366B Bruksanvisning
Läs gratis den bruksanvisning för Metra 99-7366B (8 sidor) i kategorin Bilsats. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5.5 recensioner. Har du en fråga om Metra 99-7366B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
METRA. The World’s best kits.
™
metraonline.com
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 9/21/2015 INST99-7366B
Installation instructions for part 99-7366B
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• ISO DIN radio provision with pocket
• Painted scratch resistant black
• A) Radio trim panel • B) Radio brackets • C) (4) #8 x 3/8” Phillips screws • D) Pocket
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304, HYBL-04
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver • 10mm Socket wrench • Cutting tool
TOOLS REQUIRED
Kia Sorento 2016-up
99-7366B
A B C D
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 2
Kit Assembly .......................................................... 3
Table of Contents
99-7366B
2
1.
Unclip and remove the factory radio
trim panel including the a/c vents.
(Figure A)
2. Remove (4) Phillips screws
securing the radio and then
remove. (Figure B)
Continue to kit preparation
1. Cut the marked area in the
dash cavity. (Figure A)
2. Remove (1) 10mm nut holding the
area previously cut in step 1 to
remove the cut-out area.
Continue to kit assembly
Dash Disassembly Kit Preparation
(Figure B)
(Figure A)
(Figure A)
99-7366B
Kit Assembly
(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1. Attach the pocket to the radio
brackets using (4) #8 x 3/8”
Phillips screws supplied. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the pocket/
bracket assembly, and then
secure the radio using the screws
supplied with the radio. (Figure B)
4.
Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections to
the radio. Metra recommends using
the proper mating adapters from
Metra and/or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5.
Secure the completed assembly into
the sub-dash using the factory hardware.
6. Snap the 7366 radio trim panel
into the factory trim panel, and
then reassemble the dash in
reverse order of disassembly.
3
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-7366B |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-7366B ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
1 April 2025
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
Bilsats Manualer
- TomTom
- I-Tec
- PAC
- Lenco
- ZZ-2
- JVC
- Livoo
- Wagan Tech
- WAGAN
- Kensington
- Medion
- Dymond
- B-Speech
- Envivo
- Foliatec
Nyaste Bilsats Manualer
2 April 2025
16 Februari 2025
16 Februari 2025
16 Februari 2025
31 December 2025
29 December 2024
16 December 2024
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024