Metra AFDI-5V Bruksanvisning

Läs gratis den bruksanvisning för Metra AFDI-5V (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 7.5 recensioner. Har du en fråga om Metra AFDI-5V eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
When replacing radios in vehicles with OEM amplifiers, mainly in Ford, Lincoln, and Mercury
vehicles, an audible “pop through the speakers may be heard, especially the subwoofer. The
main reason for this “pop is that the OEM amplifiers do not require 12 volts to turn on but 5 volts.
Axxess has developed the AFDI-5V to take a normal 12 volt turn on from the aftermarket radio
and drop it down to 5 volts, which the OEM amplifier handles better. A 3 wire hook up makes the
AFDI-5V very simple to use.
Wiring the AFDI-5V:
1. Connect the wire to the Blue/White aftermarket radio’s amplifier turn on wire.
2. Connect the to chassis ground.Black wire
3. Connect the wire to the vehicles amplifier turn on wire.Blue/Red
AFDI-5V
AFDI-5V 12 VOLT TO 5 VOLT
CONVERTOR INSTRUCTIONS
1-800-221-0932 www.axxessinterface.com
REV. 12/04/08 © COPYRIGHT 2008 METRA ELECTRONICS CORPORATION INSTAFDI-5V

Produktspecifikationer

Varumärke: Metra
Kategori: Inte kategoriserad
Modell: AFDI-5V

Behöver du hjälp?

Om du behöver hjälp med Metra AFDI-5V ställ en fråga nedan och andra användare kommer att svara dig