Metra E-5000C Bruksanvisning

Metra Fjärrkontroll E-5000C

Läs gratis den bruksanvisning för Metra E-5000C (3 sidor) i kategorin Fjärrkontroll. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 15 recensioner. Har du en fråga om Metra E-5000C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

120 E5000

Revision 07/23/15

SPDT Relay

APPLICATION: RELAY TURN-ON

The most popular use for the SPDT (single-pole, double-throw) relay

is high current on/off switching (for devices that draw up to 30 amps).

For example, you could connect a neon light tube to the relay, along

with the ampliﬁer turn-on lead from your in-dash receiver. Then the

neon light tube will turn on whenever you turn on your in-dash

receiver.

You need a constant (unswitched) source of 12 volt power for the

relay’s red wire. You can tap into your fuse panel or run a wire directly

from your positive battery terminal. If you run a wire to your battery,

we recommend installing a 30 amp fuse in line, close to the battery

connection.

APPLICATION: RELAY TURN-OFF

Another popular application is to use the relay to turn off or disable a

device. The diagram shows using the relay in conjunction with a car

security system to disable your car’s starter system.

The diagram shows how you would use a relay with a car security

system to disable the starter when the alarm is triggered. To do this,

you cut the low-current trigger wire that runs between the ignition

switch and the starter solenoid. Connect the red and green wires to

the ignition key side of the starter trigger wire. Connect the blue wire

to the solenoid side of the starter trigger wire.

About the relay: A relay is a switch controlled by a voltage input instead of a manual action.

By sending current through the relay, you can turn a device on or off without touching the device.

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials. If an item

is missing, please call Crutchfield at 1-888-955-6000.

Make wiring connections following instructions on page 3.

Green (86) - Connect to a positive switched

power source, such as the ampliﬁer turn-on

lead or power antenna lead from you in-dash

receiver.

Red (30) - Unswitched 12 volt power source

White (87) - Connect to positive lead of light

tube or other device to be turned on.

Black (85) - Connect to chassis ground. Also

connect negative lead of device to ground.

Blue (87a) - Not used (tape off)

Tape off any unused wires.

Green (86) - Connect to key side of starter

trigger wire (along with red wire)

Red (30) - Connect to key side of starter

trigger wire (along with green wire)

White (87) - Not used (tape off)

Black (85) - Connect to starter-disable lead

from securing system (negative trigger)

Blue (87a) - Connect to solenoid side of

starter wire

Tape off any unused wires.

*120E5000*

Produktspecifikationer

Varumärke:	Metra
Kategori:	Fjärrkontroll
Modell:	E-5000C
Färg på produkten:	Grijs
Vikt:	82 g
Bredd:	95 mm
Djup:	52 mm
Höjd:	14 mm
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Typ av strömkälla:	USB
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Mikrofon, linjeingång:	Nee
Antal Ethernet LAN (RJ-45)-portar:	1
HD typ:	4K Ultra HD
Plug and play:	Ja
Antal per paket:	1 stuk(s)
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Stöder Windows:	Ja
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Stöder Mac-operativsystem:	Ja
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ C:	1
Värdgränssnitt:	USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Andra stödsystem:	ChromeOS
USB-strömförsörjning:	Ja
USB Power Delivery herziening:	3.0
USB-strömleverans till max.:	100 W
Nätkontakt:	USB Type-C
Koppar Ethernet-kabelteknik:	10BASE-T, 100BASE-TX, 1000BASE-T
Harmoniserad systemkod (HS):	84733020