MGL Avionics FF-4 Bruksanvisning


Läs gratis den bruksanvisning för MGL Avionics FF-4 (11 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 11 recensioner. Har du en fråga om MGL Avionics FF-4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/11
Introduction
The FF-4 is a 2 1/4” sunlight readable color display instrument intended for efficient monitoring of fuel related information
for single or dual fuel tanks. The FF-4 has many display configurations based on single/dual flow senders, single/dual
level senders and a fuel pressure sender.
Full functionality is available with a fuel flow and level sender or only with a fuel flow sender using calculated fuel levels
based on fuel usage. Differential fuel flow calculations are also supported for fuel return systems. Fuel injector systems
are also supported. Standard automotive fuel level senders can be used, even with odd shaped tanks due to a
comprehensive, multi-point calibration system. Most fuel flow senders can be used as the K-factor of the sender can be
entered into the system for simple calibration.
MGL Avionics supplies a lightweight dual range fuel flow sender that is ideally suited for the FF-4. Fuel flow senders from
other manufactures (e.g. Floscan) are equally suitable.
In addition, the FF-4 can use the actual ground speed from a RS232 NMEA enabled GPS receiver to determine fuel
range.
The FF-4 can also be interfaced via the CAN bus to an external RDAC unit (Remote Data Acquisition Unit). This allows
for easier installation as the RDAC unit is normally mounted in the engine compartment.
Vega FF-4
Fuel Computer
Operating Manual – English 1.10


Produktspecifikationer

Varumärke: MGL Avionics
Kategori: Mätutrustning
Modell: FF-4

Behöver du hjälp?

Om du behöver hjälp med MGL Avionics FF-4 ställ en fråga nedan och andra användare kommer att svara dig