Michael Kors Pyper MK3901 Bruksanvisning

Michael Kors Titta Pyper MK3901

Läs nedan 📖 manual på svenska för Michael Kors Pyper MK3901 (78 sidor) i kategorin Titta. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/78

DATE MODELS

Date Setting

1. Pull the crown out to position 2.

2. Turn the crown either clockwise or counter-

clockwise and set the date for the previous

day. The direction that moves the date

varies on different watch models.

Time Setting

1. Pull crown out to position 3.

2. Turn counter-clockwise to advance the time and continue until the day

changes to the present day.

3. Set to the correct time.

4. Push crown back to position 1.

ANALOG INSTRUCTIONS

Time Setting

1. Pull the crown out to position 2.

2. Turn the crown to set the hour and minute

hands to the desired time.

3. Return the crown to position 1.

1 2

1 2 3

DATE

English

THREE EYE MULTIFUNCTION VX3J

(1 crown)

Date Setting

1. Pull crown out to position 2.

2. Turn clockwise to advance the date hand.

3. Push crown back to position 1.

Day and Time Setting

1. Pull crown out to position 3.

2. Turn clockwise to advance hour and minute hands.

The hand showing days of the week will also move with the hour and

minute hands. Keep turning until you have reached the desired day.

24-Hour Sub-Dial Setting

The mo vement o f the 24-hour hand corresponds to the hour and minute

hands. When se tting the time be sure to check tha t the 24- hour hand is

set properly.

1 2 3

DATE

24-HOUR

DAY

CHRONOGRAPH VD51B

Time/Date Setting

1. Before setting the time, make sure the chronograph second and minute

hands are at the 12:00 position and the chronograph is not running. See

Chronograph Operation instructions below.

2. Pull crown out to position 2.

3. Rotate crown clockwise until the prev ious day s date is displayed in ’

date window.

4. Pull crown out to position 3 when the second hand is in the 12:00

position. Second hand will stop.

5. Rotate crown clockwise to set time.

6. Return crown to position 1.

NOTE: Make sure that AM/PM is set correctly. Do not set date between

9:00 p.m. and 1:00 a.m. or day may not change properly.

Chronograph Operation

1. Press A to start/stop the chronograph.

2. Press B to reset.

CHRONO SECOND HAND

CHRONO MINUTE HAND

1 2 3

CHRONOGRAPH STOPWATCH VD54

(with date-VD53)

(1 crown/2 pushers)

Time and Date Setting

1. Before setting the time, make sure the chronograph is stopped and set to

zero (12:00) position.

2. Pull crown out to position 2.

3. Turn crown clockwise until the previous day s date is displayed.’

4. Pull crown out to position 3 when the second hand is at the 12:00 position.

5. Turn crown to set time.

NOTE: The movement of the 24-hour hand corresponds to the hour and

minute hands. When setting the time be sure to check that the 24-hour

hand is set properly.

6. Return crown to position 1.

NOTE: When the crown is in position 2, do not press the pushers.

Otherwise the chronograph hands will move.

1 2 3

24-HOUR HAND

MINUTE HAND

SECOND HAND

Chronograph

1. Press A to start/stop the chronograph.

2. Press B to reset to zero.

Split Time

1. Press B while the chronograph is running.

2. Press B again to return to the chronograph.

3.PressAtonalizetiming.

4. Press B to reset.

Chronograph Zero Reset

1. If either of the chronograph hands is not at the zero (12:00) position, pull

crown out to position 3.

2. Press A to move hands clockwise; press B to move hands counter-

clockwise.

3. Return crown to position 1.

4. With each press of A or B, the hands move one position. They move

quickly if the pushers are held down.

NOTE: If the stopwatch hands function improperly, pull out crown and

press A and B at the same time for over 2 seconds. When the pushers are

released, the stopwatch second and 1/10 second hands will spin around

and return to “0.” This will indicate that the internal circuit has been reset.

Date Setting (on some models only)

1. Pull crown out to position 2.

2. Turn clockwise until desired date appears in window.

3. Push crown back to position 1.

CHRONOGRAPH ISA 8172/220

(1 crown/2 pushers)

Time/Day Setting

1. Pull crown out to position 3.

2. Rotate crown to set time.

1 2 3

DAY

SECOND HAND

CHRONO MINUTE HAND

CHRONO 1/5

SECOND HAND

DATE

3. To adjust day, continue rotating crown 24 hours until day is correct.

4. Return crown to position 1.

Date Setting

1. Pull crown out to position 2.

2. Rotate crown clockwise until the correct date is shown in the date window.

3. Return crown to position 1.

Chronograph Operation

1. Press A to start/stop the chronograph.

2. Press B to reset.

NOTE: After 2 hours of continuous running, the chronograph will

automatically stop and reset to save the battery.

Split Time

1. Press B while the chronograph is running.

2. Press B again to return to the chronograph.

3. Press A to finalize timing.

4. Press B to reset.

CHRONOGRAPH JS15, JS25

Time and Date Setting

1. Pull crown out to position 2.

2. Rotate crown clockwise until the previous d ay s date is shown in the ’

date window.

3. Pull crown out to position 3.

4. Rotate crown clockwise until the correct date is shown in the date window.

5. Continue to rotate crown to set correct am/pm time.

NOTE: The movement of the 24-hour hand corresponds to the hour and

minute hands. When setting the time be sure to check that the 24-hour

hand is set properly.

6. Return crown to position 1.

NOTE: When the crown is in position 2, do not press the pushers.

Otherwise the chronograph hands will move.

NOTE: Do not set the date between 9:00 p.m. and 1:00 a.m. to ensure

accuracy.

1 2 3

CHRONOGRAPH

SECOND HAND

CHRONOGRAPH

MINUTE HAND

24-HOUR HAND

JS15

1 2 3

CHRONOGRAPH

SECOND HAND

CHRONOGRAPH

MINUTE HAND 24-HOUR HAND

JS25

Chronograph

1. Press A to start/stop the chronograph.

2. Press B to reset to zero.

Chronograph Zero Reset

1. If either of the chronograph hands is not at the zero (12:00) position, pull

crown out to position 3.

2. Press A to move hands clockwise; press B to move hands counter-

clockwise. Each press of A or B will move the chronograph hands by

one increment/decrement. Or press and hold A or B for fast increment/

decrement.

3. When both hands are in the zero position, reset time and return crown to

position 1.

NOTE: Chronograph minute hand will synchronize with chronograph

second hand during chronograph zero reset.

DIGITAL X1

Normal Time Display

1. Press A to change mode. Mode sequence is alarm, countdown timer, and

chronograph.

2. Press and hold A 3 seconds to toggle auto EL on/off.

3. Press B for EL.

4. Press C to toggle hourly chime on/off.

5.PressDtoashtimezone2.PressandholdD3secondstotoggle

normal time display/time zone 2.

NOTE: In any mode, press and hold C 3 seconds to change to

chronograph mode.

NOTE: At any point in any setting mode, press B to exit setting mode.

NOTE: I n any setting mode , if no pusher is operated for 30 seconds,

all changes will be saved and the setting will auto matically return t o

display mode.

Time and Calendar Setting

1.In normal time display, press and hold      B3seconds; hour will begin ashing.   

2. Press C to increase digit; press D to decrease digit. Press and hold C or

D for fast increment/decrement.

3. Press A to set and advance to next setting value.

4. Repeat steps 2 and 3 through setting sequence. Setting sequence is:

hour, minute, second, year, month, date, 12/24-hour format, month/date or

date/month format.

5. Press B to exit setting mode.

6. To set Time Zone 2, press and hold D 3 seconds to change to Time Zone

2. Then use steps 1-5 to set.

NOTE: Weekday is automatically updated upon exiting setting mode.

Recall Mode

1. Press A to change to recall mode.

NOTE: If no data is stored, display will show NO DATA. If data is saved,

display will show the current set (1-9).

2. Press C to toggle through set data: total time, best time, average time,

and each lap (up to 100 laps).

3. Press D to display current set; press D again to scroll to next set.

4. Press and hold D 3 seconds to delete all stored data in the current set.

TE: At any point in recall di splays, press A to exit and change to NO

alarm mode.

Alarm Mode

1. Press A to change to alarm mode.

2. Press C to toggle alarm on/off.

3. Press D to toggle alarm 1/alarm 2.

Alarm Setting

1.Inalarmmode,pressandholdB3seconds;hourwillbeginashing.

2. Press C to increase digit; press D to decrease digit. Press and hold C or

D for fast increment/decrement.

3. Press A to set and advance to next setting value.

4. Repeat steps 2 and 3 through setting sequence. Setting sequence is:

hour, minute, time zone 1/time zone 2.

5. Press B to exit setting mode.

TNO E: Alarm will sound for 20 seconds. Press any pusher to silence alarm.

Countdown Timer

1. Press A to change to timer mode. Default setting is 5 minutes.

2. Press C to start timer; press D to stop the timer.

3. Press and hold D 3 seconds to clear the countdown and reset the timer.

NOTE: Alarm will sound for 20 seconds when countdown reaches zero.

Press any pusher to silence alarm.

Timer Setting

1. In timer mode, press and hold B 3 seconds to enter setting mode; hour

willbeginashing.

2. Press C to increase digit; press D to decrease digit. Press and hold C or

D for fast increment/decrement.

3. Press A to set and advance to next setting value.

4. Repeat steps 2 and 3 through setting sequence. Setting sequence is:

hour, minute, seconds.

5. Press B to exit setting mode.

Chronograph Mode

1. In any mode, press and hold C 3 seconds to change to chronograph mode.

2. Press C to start the chronograph; press D to stop the chronograph.

3. Press and hold D 3 seconds to reset to zero.

Lap Counting

1. Press C while the chronograph is running for lap reading.

NOTE: If no other pusher is pressed after C is pressed, display will

automatically show total chronograph time after 5 seconds, then next lap

running time after another 5 seconds.

2. Press B to return to chronograph next lap (up to 100 laps).

3. Press D to stop chronograph.

4. Press and hold B 3 seconds to save set data, or press and hold D 3

seconds to reset to zero.

NOTE: Upon saving, display will show next empty set available (1-9) or

MEMORY FULL. Change to Recall Mode to scroll through saved data.

OPEN HEART TY605

(23 Jewels, 1 crown)

Time Setting

1. Pull crown out to position 2.

2. Turn crown clockwise to rotate hour

and minute hands to desired time.

3. Push crown back to position 1.

1 2

OPEN HEART

CLOSED

AUTOMATIC WINDING MOVEMENTS

A timepiece with an automatic winding movement obtains the power to

wind itself by the movement of your wrist, there is no battery. Therefore,

not wearing the timepiece for several consecutive days could exhaust the

power reserve. If your watch stops, it is recommended that you manually

wind the movement by rotating the crown clockwise to achieve the

necessary power reserve.

It is important that your timepiece is adjusted to match the size of your wrist.

A loose fit may result in a loss in capacity of the timepiece to wind itself.

When fully wound, your timepiece has a power reserve of approximately

38 hours.

Produktspecifikationer

Varumärke:	Michael Kors
Kategori:	Titta
Modell:	Pyper MK3901
Bredd:	305 mm
Djup:	244 mm
Typ av strömkälla:	ATX
Antal USB 2.0-portar:	8
Mikrofon, linjeingång:	Ja
Antal Ethernet LAN (RJ-45)-portar:	2
Hörlursutgångar:	1
Processoruttag:	LGA 775 (Socket T)
Processorfabrikant:	Intel
Maximalt internminne:	16 GB
Ljudutgångskanaler:	7.1 kanalen
Antal IEEE 1394/Firewire-portar:	2
Ljudchip:	Realtek ALC889A
S/PDIF-utgång:	Ja
PS/2-port(ar):	2
Minnesspänning:	1.8 V
LAN-kontroller:	Realtek RTL8111C
Typer av RAID:	0, 1,10
Expansionsplatser:	2 x PCI Express x16\n1 x PCI Express x4\n3 x PCI Express x1\n1 x PCI\n
Moderkorts formfaktor:	ATX
Antal minnesplatser:	4
BIOS-minnesstorlek:	64 Mbit
Anslutning för CPU-kylare:	Ja
Anslutningar för husfläktar:	3
ATX-strömkontakt (24-stift):	Ja
Strömförsörjningsfläktanslutning:	Ja
Antal SATA-anslutningar:	6
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
Anslutning för diskettstation:	Ja
Chassiintrångsanslutning:	Ja
S/PDIF uitgang:	Ja
IEEE1394-anslutningar:	1
CD/AUX-ljudspel:	Ja
Antal parallella ATA-anslutningar:	1
Typ av anslutning (2:a) styrenhet:	IDE
Typ av styrenhetsanslutning:	SATA 2