Micro Matic DP-120D-45GR Bruksanvisning
Micro Matic
Inte kategoriserad
DP-120D-45GR
Läs nedan 📖 manual på svenska för Micro Matic DP-120D-45GR (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 11 personer och betygsatt med 4.7 stjärnor i genomsnitt av 6 användare
Sida 1/2

Job Number:_____________________________________________ Location: ____________________________________________________________________ ____
• Add European style while creating dispense excitement
• Condition the glass before pouring – invert glass, push down on sprayer
for cold water rinsing
• Robust 18 gauge stainless steel construction
• Welded corners, nished smooth for safety and appearance
www.micromatic.com • 1 (866) 327-4159
SURFACE MOUNT SERIES 5" X 45"
DRIP TRAY
5” WIDTH TRAY WITH GLASS RINSER
DP-120D-45GR
Brushed Stainless Steel
NSF Certied
(Rinser Only)

Specifications
Central
10726 North Second St.
Machesney Park, IL 61115
Tel. (815) 968-7557
Fax. (815) 968-0363
Southeast
2364 Simon Ct.
Brooksville, FL 34604
Tel. (352) 799-6331
Fax. (352) 796-2429
Northeast
4601 Saucon Creek Rd.
Center Valley, PA 18034
Tel. (610) 625-4464
Fax. (610) 625-4466
West
19791 Bahama St.
Northridge, CA 91324
Tel. (818) 701-9765
Fax. (818) 701-9844
Toll-Free: 1-866-327-4159
www.micromatic.com
©2016 Micro Matic USA, Inc. All Rights Reserved.
Dimensions
Rinser Water Inlet Installation
• Always check local plumbing codes first.
• Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
• Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a
45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
• Install a shut-off for the rinser water supply if line is not hard plumbed into the system.
Micro Matic reserves the right to change specifications without notice.
7/8" - 14
000038S-D0216
127mm
5"
64mm
2 1/2" 64mm
2 1/2"
19mm
3/4"
572mm
22 1/2"
1143mm
45"
140mm
5 1/2"
Part No. Dimensions Description Shipping Weight Box Dimensions
DP-120D-45GR 5"W x 45"L x 3/4"H Stainless Steel TBD TBD
Drain:
Threaded Brass
3 1/2" x 5/8" - 18 1/2" O.D.
3 3/4" Dia.
GR-1561
1/2" BSP
Produktspecifikationer
Varumärke: | Micro Matic |
Kategori: | Inte kategoriserad |
Modell: | DP-120D-45GR |
Behöver du hjälp?
Om du behöver hjälp med Micro Matic DP-120D-45GR ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Micro Matic Manualer

18 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024

18 September 2024
Inte kategoriserad Manualer
- Inte kategoriserad Yongnuo
- Inte kategoriserad Meridian
- Inte kategoriserad Absima
- Inte kategoriserad D'Addario
- Inte kategoriserad Fischer Amps
- Inte kategoriserad Furrion
- Inte kategoriserad Lazer
- Inte kategoriserad Nofred
- Inte kategoriserad Tusa
- Inte kategoriserad Golden Age Project
- Inte kategoriserad Petite Chérie
- Inte kategoriserad Delta Dore
- Inte kategoriserad Domo
- Inte kategoriserad LevelOne
- Inte kategoriserad Contour Design
Nyaste Inte kategoriserad Manualer

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025