Micro Matic DP-MET-H-34GR-Z Bruksanvisning
Micro Matic
Inte kategoriserad
DP-MET-H-34GR-Z
Läs gratis den bruksanvisning för Micro Matic DP-MET-H-34GR-Z (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9 recensioner. Har du en fråga om Micro Matic DP-MET-H-34GR-Z eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Job Number:_____________________________________________ Location: ____________________________________________________________________ ____
www.micromatic.com • 1 (866) 327-4159
DRIP TRAY
• Designed specifically for Metropolis H draft towers
• Add European style while creating dispense excitement
• Condition the glass before pouring - invert glass, push down on sprayer
for cold water rinsing
• Robust 18 gauge stainless steel construction
NSF Certified
(Rinser Only)
SURFACE MOUNT SERIES DRIP TRAY
SURFACE MOUNT SERIES WITH CUTOUT 8 1/2" X 34"
DP-MET-H-34GR-Z
Stainless Steel
DP-MET-H-PVD-34GR-Z
PVD Brass / Stainless Steel
Specifications
Central
10726 North Second St.
Machesney Park, IL 61115
Tel. (815) 968-7557
Fax. (815) 968-0363
Northeast
4601 Saucon Creek Rd.
Center Valley, PA 18034
Tel. (610) 625-4464
Fax. (610) 625-4466
West
19791 Bahama St.
Northridge, CA 91324
Tel. (818) 701-9765
Fax. (818) 701-9844
Toll-Free: 1-866-327-4159
www.micromatic.com
©2016 Micro Matic USA, Inc. All Rights Reserved.
Dimensions
Rinser Water Inlet Installation
Micro Matic reserves the right to change specifications without notice.
• Always check local plumbing codes first
• Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure)
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking)
• Install in-line shut off for the rinser system from the street water supply (this must be turned off nightly)
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a
45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system
• Install a shut off for the rinser water supply if line is not hard plumbed into the system
Southeast
2386 Simon Ct.
Brooksville, FL 34604
Tel. (352) 799-6331
Fax. (352) 796-2429
000019S-D0117
203.2 [8.00]
R77.79 [R3.062]
TOWER PEDESTAL CENTER
431.8 [17.00]
139.7 [5.50]
863.6 [34.00]
19.05 [0.75]
Drain: Threaded Brass
5/8" -18 UNF X 3 1/2" LONG
0.53" OD.
7/8" -14 UNF
1/2" BSP
215.9 [8.50]
63.5 [2.50]
101.6 [4.0]
Part No. Dimensions Finish Shipping Weight
DP-MET-H-34GR-Z 8 1/2"W x 34"L x 3/4"H Stainless Steel TBD
TBD
DP-MET-H-PVD-34GR-Z 8 1/2"W x 34"L x 3/4"H PVD Brass / Stainless Steel TBD
TBD
Produktspecifikationer
| Varumärke: | Micro Matic |
| Kategori: | Inte kategoriserad |
| Modell: | DP-MET-H-34GR-Z |
Behöver du hjälp?
Om du behöver hjälp med Micro Matic DP-MET-H-34GR-Z ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Micro Matic Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Inte kategoriserad Manualer
- Roswell
- Aukey
- Generac
- VAIS
- We-Vibe
- Radial Engineering
- Veho
- Coyote
- Exit
- Topex
- Peterson
- Dave Smith
- Intertechno
- Monster
- JL Audio
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025