Microchip AR1010 Bruksanvisning


Läs gratis den bruksanvisning för Microchip AR1010 (61 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om Microchip AR1010 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/61
2009-2016 Microchip Technology Inc. DS40001393C-page 1
Special Features
RoHS Compliant
Power-Saving Sleep mode
Industrial Temperature Range
Built-in Drift Compensation Algorithm
128 Bytes of User EEPROM
Power Requirements
Operating Voltage: 2.5-5.0V ±5%
Standby Current:
- 5V: 85 µA, typical; 125 µA (maximum)
- 2.5V: 40 µA, typical; 60 µA (maximum)
Operating “No touch” Current:
- 3.0 mA (typical)
Operating “Touch” Current:
- 17 mA, typical, with a touch sensor having
200 layers
- Actual current is dependent on the touch
sensor used
AR1011/AR1021 Brown-Out Detection (BOR) set
to 2.2V
Touch Modes
Off, Stream, Down, Up and more.
Touch Sensor Support
4-Wire, 5-Wire and 8-Wire Analog Resistive
Lead-to-Lead Resistance: 50-2,000typical)
Layer-to-Layer Capacitance: 0-0.5 µF
Touch Sensor Time Constant: 500 µs (maximum)
Touch Resolution
10-bit Resolution (maximum)
Touch Coordinate Report Rate
140 Reports Per Second (typical) with a Touch
Sensor of 0.02 µF with 200 Layers
Actual Report Rate is dependent on the Touch
Sensor used
Communications
SPI, Slave mode, p/n AR1021
•I
2
C, Slave mode, p/n, AR1021
UART, 9600 Baud Rate, p/n AR1011
AR1000 SERIES RESISTIVE TOUCH
SCREEN CONTROLLER
AR1000 Series Resistive Touch Screen Controller


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: AR1010

Behöver du hjälp?

Om du behöver hjälp med Microchip AR1010 ställ en fråga nedan och andra användare kommer att svara dig