Microchip AT9919 Bruksanvisning

Microchip Inte kategoriserad AT9919

Läs gratis den bruksanvisning för Microchip AT9919 (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7.5 recensioner. Har du en fråga om Microchip AT9919 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16



2016-2022 Microchip Technology Inc. and its subsidiaries DS20005595B-page 1

AT9919

Features

• AEC-Q100 Qualified

• Hysteretic Control with High-side Current Sensing

• Wide Input Voltage Range: 4.5V to 40V

• >90% Efficiency

• Typical ±5% LED Current Accuracy

• Up to 2 MHz Switching Frequency

• Adjustable Constant LED Current

• Analog or Pulse-Width Modulation (PWM) Control

Signal for PWM Dimming

• Overtemperature Protection

• –40ºC to +125ºC Operating Temperature Range

Applications

• LED Lighting Applications

• Automotive Applications

General Description

AT9919 is a PWM controller IC designed to drive

high-brightness LEDs using a buck topology. It

operates from an input voltage of 4.5 VDC to 40 VDC

and employs hysteretic control with a high-side current

sense resistor to set the constant output current.

The operating frequency range can be set by selecting

the proper inductor. Operation at high switching

frequency is possible since the hysteretic control

maintains accuracy even at high frequencies. This

permits the use of small inductors and capacitors,

minimizing space and cost in the overall system.

LED brightness control is achieved with PWM dimming

from an analog or PWM input signal. Unique PWM

circuitry allows true constant color with a high dimming

range. The dimming frequency is programmed using a

single external capacitor.

AT9919 comes in a small, 8-Lead WDFN package and

is qualified for LED lighting applications.

AT9919 passes the automotive AEC-Q100 reliability

testing.

Package Type

8-Lead WDFN

(Top View)

See Table 2-1 for pin information.

VIN

GATE

RAMP

ADIM

GND

VDD

DIM

GND

Hysteretic Buck High-Brightness LED Driver with

High-Side Current Sensing

Produktspecifikationer

Varumärke:	Microchip
Kategori:	Inte kategoriserad
Modell:	AT9919
Typ av operation:	Draaiknop
Färg på produkten:	Zwart
Inbyggd display:	Nee
Bredd:	101.5 mm
Djup:	95 mm
Höjd:	24.4 mm
Inspänning:	12 V
Utström:	830 mA
Spännande:	6 V
Antal kanaler:	3 kanalen
Märkeffekt:	10 W