Microchip ATSAMD21E15L Bruksanvisning
Microchip
Inte kategoriserad
ATSAMD21E15L
Läs gratis den bruksanvisning för Microchip ATSAMD21E15L (44 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4.5 recensioner. Har du en fråga om Microchip ATSAMD21E15L eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/44
TRAINING MANUAL
Single-slope PWM Implementation using SAM D21 TCC in
a Touch- based Application
AN- 9232
Prerequisites
• Hardware Prerequisites
• Atmel® SAM D21 Xplained Pro Evaluation Kit
• Atmel KitQT1 Xplained Pro
• USB Micro Cable (TypeA/ -B) Micro
• Software Prerequisites
• Atmel Studio 6.2 or higher
• Atmel Software Framework 3.1 .0 or higher7
• Atmel QTouch® Composer 5.3 or higher
• Atmel QTouch Library 5.3 or higher
• Documentation Prerequisites
• Atmel- - - - - - - -42271 Introduction to QTouch Design Parameters using
SAM- - - - -D21 Xplained Pro_Training Manual_AN 7846 Training Manual
• Estimated completion time: 60min.
Introduction
The goal of this hands on is to:-
• Create a Touch proje using QTouch Project Builderct
• Use QTouch Analyzer to test the project
• Implement a PWM signal using the SAM D21 Timer/Counters for Control
peripheral the brightness (TCC) to drive of a LED
• Modify the utton LED brightness in relation to the Touch Delta value of a B
sensor by updating the PWM duty cycle
42327 A 07/−2014
AN- – -9232 Single slope PWM Implementation using SAM D21 TCC in a Touch-based Application: 42327 2014A 07/−
Page 442 of
Table of Contents
Prerequisites .....................................................................................1
Introduction .......................................................................................1
Icon Key Identifiers ...........................................................................3
1. Training Module Architecture .....................................................4
1.1 Atmel Studio Extension (.vsix) ............................................................. 4
1.2 Atmel Training Executable (.exe) ......................................................... 4
2. Introduction ................................................................................5
3. Assignment 1: Create a Touch project using QTouch Project
Builder ........................................................................................6
3.1 Project Creation ................................................................................... 6
3.2 Conclusion ......................................................................................... 18
4. Assignment 2: Use QTouch Analyzer to Test the Project ........ 19
4.1 Connect the Kit to QTouch Analyzer ................................................. 19
4.2 Test the Proximity Effect of the QTouch Application ......................... 23
4.3 Conclusion ......................................................................................... 24
5. Assignment 3: Implement a PWM Signal using the SAM D21
Timer/Counters for Control Application Peripheral (TCC) ........ 25
5.1 Introduction to Timer/Counters for Control Application (TCC) ........... 25
5.2 TCC Peripheral Initialization Using ASF Quick Start Guide. ............. 27
5.3 Conclusion ......................................................................................... 34
6. Assignment 4: Use QTouch Button to Control LED Brightness 35
6.1 Reading and using Button Touch Delta Value ................................... 35
6.2 Using PWM to Control LED Brightness ............................................. 37
6.3 Conclusion ......................................................................................... 41
7. Conclusion ............................................................................... 42
8. Revision History ....................................................................... 43
AN- – -9232 Single slope PWM Implementation using SAM D21 TCC in a Touch-based Application: 42327 2014A 07/−
Page 443 of
Icon Key Identifiers
Delivers contextual information about a specific topic.
Highlights useful tips and techniques.
Highlights objectives to be completed.
Highlights the expected result of an assignment step.
Indicates important information.
Highlights actions to be executed out of the target when
necessary.
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | ATSAMD21E15L |
Behöver du hjälp?
Om du behöver hjälp med Microchip ATSAMD21E15L ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
12 Mars 2025
12 Mars 2025
6 Mars 2025
5 Mars 2025
4 Mars 2025
4 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
Inte kategoriserad Manualer
- Ozito
- Spear & Jackson
- OutNowTech
- Vermeiren
- Milestone Systems
- Testboy
- Lexmark
- RC Allen
- Better Life
- Hasselblad
- Bikemate
- Heidemann
- Lahti Pro
- ATen
- Wallas
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025