Microchip ATSAMD21E16 Bruksanvisning


Läs gratis den bruksanvisning för Microchip ATSAMD21E16 (44 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5.5 recensioner. Har du en fråga om Microchip ATSAMD21E16 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/44
TRAINING MANUAL
Single-slope PWM Implementation using SAM D21 TCC in
a Touch- based Application
AN- 9232
Prerequisites
Hardware Prerequisites
Atmel® SAM D21 Xplained Pro Evaluation Kit
Atmel KitQT1 Xplained Pro
USB Micro Cable (TypeA/ -B) Micro
Software Prerequisites
Atmel Studio 6.2 or higher
Atmel Software Framework 3.1 .0 or higher7
Atmel QTouch® Composer 5.3 or higher
Atmel QTouch Library 5.3 or higher
Documentation Prerequisites
Atmel- - - - - - - -42271 Introduction to QTouch Design Parameters using
SAM- - - - -D21 Xplained Pro_Training Manual_AN 7846 Training Manual
Estimated completion time: 60min.
Introduction
The goal of this hands on is to:-
Create a Touch proje using QTouch Project Builderct
Use QTouch Analyzer to test the project
Implement a PWM signal using the SAM D21 Timer/Counters for Control
peripheral the brightness (TCC) to drive of a LED
Modify the utton LED brightness in relation to the Touch Delta value of a B
sensor by updating the PWM duty cycle
42327 A 07/2014


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: ATSAMD21E16

Behöver du hjälp?

Om du behöver hjälp med Microchip ATSAMD21E16 ställ en fråga nedan och andra användare kommer att svara dig