Microchip HV9150 Bruksanvisning
Microchip
Inte kategoriserad
HV9150
Läs gratis den bruksanvisning för Microchip HV9150 (20 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6.5 recensioner. Har du en fråga om Microchip HV9150 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
2017-2019 Microchip Technology Inc. DS20005689B-page 1
HV9150
Features
• 6V to 500V Wide Output Voltage Range
• 2.7V Low Input Voltage
• 5W Maximum Output Power with External
MOSFET Driver
• Built-in Charge Pump Converter for the Gate
Driver
• Programmable Switching Frequency from 40 kHz
to 400 kHz
• Four Programmable Duty Cycles from 50% to
87.5%
• FB Return Ground Switch for Power-Saving
Applications
• Built-In Delay Timer for Internal Protection
• Non-Isolated DC/DC Converter
Applications
• Portable Electronic Equipment
• MEMS
• Printers
General Description
The HV9150 is a high output voltage Hysteretic mode
step-up DC/DC controller that has a built-in charge
pump converter and a linear regulator for a wide range
of input voltage. The Charge Pump Converter mode is
ideal for battery-powered applications. The internal
converter can provide a minimum of 5V gate driver
output voltage (at VIN = 2.7V) to the external N-channel
MOSFET. The range of 2.7V to 4.5V input supply
voltage is ideal for battery-powered applications, such
as portable electronic equipment. The internal linear
regulator is selected when a higher supply voltage rail
is available in the system.
A feedback return ground path switch is also integrated
into the device to minimize the quiescent current during
the controller shutdown. This feature provides power
savings for energy-critical applications.
In addition, a built-in timer is available to protect the
internal circuit and help dissipate the energy from the
external high-voltage storage capacitor. This device is
designed for systems requiring high-voltage and
low-current applications such as MEMS devices.
Package Type
Pads are at the bottom of the package. Center heat slug is at ground potential. See Table 3-1 for pin information.
16-lead QFN
(Top View)
VDD
GATE
FB_RTN
FB
VCONTROL
FREQ_ADJ
EXT_REF
CT
VLL
GND
EN
CP_EN
CCP1-
CCP1+
CCP2-
CCP2+
1
16
High-Voltage Output Hysteretic-Mode Step-Up DC/DC Controller
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | HV9150 |
Behöver du hjälp?
Om du behöver hjälp med Microchip HV9150 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
12 Mars 2025
12 Mars 2025
6 Mars 2025
5 Mars 2025
4 Mars 2025
4 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
Inte kategoriserad Manualer
- NeoMounts
- LG
- Anybus
- Intellinet
- FBT
- ACE
- Zebra
- Röhm
- Vizio
- Balt
- Grixx
- Enviroswim
- Nobo
- Casaria
- Supermicro
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025