Microchip HV9150DB1 Bruksanvisning


Läs gratis den bruksanvisning för Microchip HV9150DB1 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 6 recensioner. Har du en fråga om Microchip HV9150DB1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Supertex inc.
Supertex inc.
www.supertex.com
HV9150DB1
Doc.# DSDB-HV9150DB1
NR120213
General Description
The Supertex HV9150DB1 demoboard is for the evaluation
of the HV9150 hysteretic DC/DC controller. This demoboard
consists of all necessary components to create a 5V to 200V
step up converter capable of providing 600mW of output
power.
This DC/DC converter has a single voltage input and a single
voltage output. The demoboard is congured to use the internal
voltage reference. In addition, the user also has access to an
external voltage reference pin if it is preferred. The output voltage
can be adjusted from 50V to 200V by adjusting the potentiometer
next to the output terminals.
The potentiometer is used in the resistor feedback network for
demonstration purposes.
The demoboard shows that all necessary components for this
600mW converter can be packed into a square inch, single sided,
PCB area.
To ensure a stable operation of the DC/DC converter, it is
recommended that a low ESR bulk decoupling capacitor be connect
at the input voltage supply.
Board Layout
Hysteretic DC/DC Controller Demoboard
Specications
Parameter Value
VIN input voltage 4.75V to 5.25V
VOUT output voltage 50V to 200V
IOUT output current 3mA max at 200V
Operating frequency 200kHz typical
Actual Dimensions: 46mm x 41mm
25mm
26mm


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: HV9150DB1

Behöver du hjälp?

Om du behöver hjälp med Microchip HV9150DB1 ställ en fråga nedan och andra användare kommer att svara dig