Microchip HV9911 Bruksanvisning
Microchip
Inte kategoriserad
HV9911
Läs gratis den bruksanvisning för Microchip HV9911 (22 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7.5 recensioner. Har du en fråga om Microchip HV9911 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/22
2017 Microchip Technology Inc. DS20005580A-page 1
HV9911
Features
• Switch-mode Controller for Single-switch Drivers:
- Buck
- Boost
- Buck-boost
- SEPIC
• Works with High-side Current Sensing
• Closed-loop Control of Output Current
• High Pulse-Width Modulation (PWM) Dimming
Ratio
• Internal 250V Linear Regulator (can be extended
using external Zener Diodes)
• Internal 2% Voltage Reference (0°C < T
A < 85°C)
• Constant Frequency or Constant Off-time
Operation
• Programmable Slope Compensation
• Logic Input for Enable and PWM Dimming
• +0.2A/-0.4A Gate Driver
• Output Short-circuit Protection
• Output Overvoltage Protection
• Synchronization Capability
• Programmable Metal-Oxide Semiconductor
Field-Effect Transistor (MOSFET) Current Limit
Applications
• RGB Backlight Applications
• Battery-powered LED Lamps
• Other DC/DC LED Drivers
General Description
The HV9911 is an LED driver IC designed to control
single-switch PWM converters (buck, boost,
buck-boost and SEPIC) in a Constant Frequency or
Constant Off-time mode. The controller uses a peak
current control scheme with programmable slope
compensation and includes an internal
transconductance amplifier to control the output current
in closed loop, enabling high output current accuracy.
In the Constant Frequency mode, multiple HV9911s
can be synchronized with each other or with an
external clock using the sync pin. Programmable
MOSFET current limit enables current limiting during
Input Undervoltage and Output Overload conditions.
The IC also includes a 0.2A source and 0.4A sink gate
driver for high-power applications. An internal
9V–250V linear regulator powers the IC, eliminating the
need for a separate power supply. The HV9911
provides a TTL-compatible PWM dimming input that
can accept an external control signal with a duty ratio
of 0%–100% and a frequency of up to a few kilohertz.
The IC also provides a FAULT output which, can be
used to disconnect the LEDs in case of a Fault
condition, using an external disconnect FET.
The HV9911-based LED driver is ideal for RGB
backlight applications with DC inputs. HV9911-based
LED lamp drivers can achieve efficiency in excess of
90% for buck and boost applications.
Package Type
VIN
VDD
GATE
GND
CS
SC
RT
SYNC
FDBK
IREF
COMP
PWMD
OVP
FAULT
REF
CLIM
1
2
3
4
5
6
7
8 9
10
11
12
13
14
15
16
16-lead SOIC
(Top view)
See Table 2-1 for pin information.
Switch-Mode LED Driver IC with High Current Accuracy
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | HV9911 |
Behöver du hjälp?
Om du behöver hjälp med Microchip HV9911 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
12 Mars 2025
12 Mars 2025
6 Mars 2025
5 Mars 2025
4 Mars 2025
4 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
Inte kategoriserad Manualer
- Uniross
- Imarflex
- Leatherman
- Proteca
- Celestron
- Squarp Instruments
- Maxicool
- Hubble Connected
- Hurricane
- SMC
- OK
- TOGU
- Challenge Xtreme
- Dodow
- Benning
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025