Microchip MCP1642 Bruksanvisning


Läs gratis den bruksanvisning för Microchip MCP1642 (32 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6.5 recensioner. Har du en fråga om Microchip MCP1642 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/32
2014 Microchip Technology Inc. DS20005253A-page 1
MCP1642B/D
Features
Up to 96% Typical Efficiency
1.8A Typical Peak Input Current Limit:
- IOUT > 175 mA @ 1.2V VIN, 3.3V VOUT
- IOUT > 600 mA @ 2.4V VIN, 3.3V VOUT
- IOUT > 800 mA @ 3.3V VIN, 5.0V VOUT
- IOUT > 1A @ VIN > 3.6V, 5.0V VOUT
Low Start-Up Voltage: 0.65V, typical 3.3V V
OUT
@ 1 mA
Low Operating Input Voltage: 0.35V, typical 3.3V
VOUT @ 1 mA
Output Voltage Range:
- Reference Voltage, VFB = 1.21V
- 1.8V to 5.5V for the adjustable device option
- 1.8V, 3.0V, 3.3V and 5.0V for fixed V
OUT
options
Maximum Input Voltage VOUT < 5.5V
PWM Operation: 1 MHz
- Low Noise, Anti-Ringing Control
Power Good Open-Drain Output
Internal Synchronous Rectifier
Internal Compensation
Inrush Current Limiting and Internal Soft-Start
Selectable, Logic-Controlled Shutdown States:
- True Load Disconnect Option (MCP1642B)
- Input-to-Output Bypass Option (MCP1642D)
Shutdown Current (All States): 1 µA
Overtemperature Protection
Available Packages:
- 8-Lead MSOP
- 8-Lead 2x3 DFN
Applications
One, Two and Three-Cell Alkaline, Lithium
Ultimate and NiMH/NiCd Portable Products
Single-Cell Li-Ion to 5V Converters
• PIC® MCU Power
USB Emergency Backup Charger from Batteries
Personal Medical Products
Wireless Sensors
Hand-Held Instruments
GPS Receivers
+3.3V to +5.0V Distributed Power Supply
General Description
The MCP1642B/D devices are compact,
high-efficiency, fixed-frequency, synchronous step-up
DC-DC converters. This family of devices provides an
easy-to-use power supply solution for applications
powered by either one-cell, two-cell, or three-cell
alkaline, Ultimate Lithium, NiCd, NiMH, one-cell Li-Ion
or Li-Polymer batteries.
Low-voltage technology allows the regulator to start-up
without high inrush current or output voltage overshoot
from a low voltage input. High efficiency is
accomplished by integrating the low-resistance
N-Channel Boost switch and synchronous P-Channel
switch. All compensation and protection circuitry are
integrated to minimize the number of external
components. An open-drain Power Good output is
provided to indicate when the output voltage is within
10% of regulation and facilitates the interface with an
MCU. For standby applications, MCP1642B provides a
“true output disconnect” from input to output while in
shutdown (EN = GND). An additional device option
(MCP1642D) is available and connects “input to output
bypass” while in shutdown. Both options consume less
than 1 µA of input current.
For the adjustable (ADJ) device options, the output
voltage is set by a small external resistor divider. Fixed
VOUT device options do not require external divider
resistors. Two package options, 8-lead MSOP and 8-
lead 2x3 DFN, are available.
Package Types
PG
NC
VOUT
SGND
PGND
1
2
3
4
8
7
6
5SW
VIN
EN
EP
9
PGND
SGND
PG
VFB
VOUT
SGND
PGND
1
2
3
4
8
7
6
5 SW
VIN
EN
EP
9
6
1
2
3
8VIN
PGND
EN
VFB
PG
7SGND
5
4SW
VOUT
6
1
2
3
8VIN
EN
NC
PG
7
5
4 SWVOUT
MCP1642B/D-xx
MSOP
MCP1642B/D-xx
2x3 DFN*
MCP1642B/D-ADJ
MSOP
MCP1642B/D-ADJ
2x3 DFN*
* Includes Exposed Thermal Pad (EP); see Table 3-1.
1.8A Input Current Switch, 1 MHz Low-Voltage Start-Up
Synchronous Boost Regulator


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: MCP1642

Behöver du hjälp?

Om du behöver hjälp med Microchip MCP1642 ställ en fråga nedan och andra användare kommer att svara dig