Microchip MCP73826 Bruksanvisning
Microchip
Inte kategoriserad
MCP73826
Läs gratis den bruksanvisning för Microchip MCP73826 (24 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7 recensioner. Har du en fråga om Microchip MCP73826 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/24
2002-2013 Microchip Technology Inc. DS21705B-page 1
MCP73826
Features
• Linear Charge Management Controller for Single
Lithium-Ion Cells
• High Accuracy Preset Voltage Regulation:
+1% (max)
• Two Preset Voltage Regulation Options:
- 4.1V - MCP73826-4.1
- 4.2V - MCP73826-4.2
• Programmable Charge Current
• Automatic Cell Preconditioning of Deeply
Depleted Cells, Minimizing Heat Dissipation Dur-
ing Initial Charge Cycle
• Automatic Power-Down when Input Power
Removed
• Temperature Range: -20°C to +85°C
• Packaging: 6-Pin SOT-23A
Applications
• Single Cell Lithium-Ion Battery Chargers
• Personal Data Assistants
• Cellular Telephones
• Hand Held Instruments
• Cradle Chargers
• Digital Cameras
Typical Application Circuit
Description
The MCP73826 is a linear charge management con-
troller for use in space-limited, cost sensitive applica-
tions. The MCP73826 combines high accuracy
constant voltage, controlled current regulation, and cell
preconditioning in a space saving 6-pin SOT-23A pack-
age. The MCP73826 provides a stand-alone charge
management solution.
The MCP73826 charges the battery in three phases:
preconditioning, controlled current, and constant volt-
age. If the battery voltage is below the internal low-volt-
age threshold, the battery is preconditioned with a
foldback current. The preconditioning phase protects
the lithium-ion cell and minimizes heat dissipation.
Following the preconditioning phase, the MCP73826
enters the controlled current phase. The MCP73826
allows for design flexibility with a programmable charge
current set by an external sense resistor. The charge
current is ramped up, based on the cell voltage, from
the foldback current to the peak charge current estab-
lished by the sense resistor. This phase is maintained
until the battery reaches the charge-regulation voltage.
Then, the MCP73826 enters the final phase, constant
voltage. The accuracy of the voltage regulation is better
than ±1% over the entire operating temperature range
and supply voltage range. The MCP73826-4.1 is preset
to a regulation voltage of 4.1V, while the MCP73826-
4.2 is preset to 4.2V.
The MCP73826 operates with an input voltage range
from 4.5V to 5.5V. The MCP73826 is fully specified
over the ambient temperature range of -20°C to +85°C.
Package Type
+
-
GND
V
DRV
V
SNS
V
IN
V
BAT
SHDN
1 2
3
6
5
4
10 µF
100 k
100 m
V
IN
Single
Lithium-Ion
Cell
NDS8434
MA2Q705
500 mA Lithium-Ion Battery Charger
5V
10 µF
MCP73826
6-Pin SOT-23A
GND
VDRV
VSNS
VIN
VBAT
SHDN 1
2
3
6
5
MCP73826
4
Single Cell Lithium-Ion Charge Management Controller
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | MCP73826 |
Behöver du hjälp?
Om du behöver hjälp med Microchip MCP73826 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
12 Mars 2025
12 Mars 2025
6 Mars 2025
5 Mars 2025
4 Mars 2025
4 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
Inte kategoriserad Manualer
- Hitachi
- Silhouette
- CDVI
- Improv
- Weidmüller
- EQ3
- Dunlop
- Speed-Link
- Lockncharge
- CommScope
- I-PRO
- Artex
- Pit Boss
- Homak
- Exo-Terra
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025