Microchip MD0100DB1 Bruksanvisning


Läs gratis den bruksanvisning för Microchip MD0100DB1 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6 recensioner. Har du en fråga om Microchip MD0100DB1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Supertex inc.
Supertex inc.
www.supertex.com
MD0100DB1
Doc.# DSDB-MD0100DB1
A032913
General Description
The Supertex MD0100DB1 demo board contains four
MD0100DK6-G dual packages providing 8 T/R switches in
the system. There are no other external components on the
board.
This demo board replaces 8 discrete diode bridge protection
circuits. The input of the MD0100DB1 is called TX which is
connected to the output of the transmitter, and the output is
called RX which is connected to the input of the receiver. The
TX and RX are interchangeable.
The MD0100DB is especially laid out so that all the inputs
are on one side and all the outputs are on other side of the
board. It provides for easy replacement on the system for
testing.
This demo board can be put into the system directly by
removing the diode bridge connections between the
transmitter and receiver (please see Figure 1), and it can
then be connected up to 8 pairs of transmitters/receivers as
shown in the connection diagram in Figure 2.
High Voltage Protection
8-Channel T/R
Switch Demoboard
Board Layout
Actual Size: 25.0mm x 9.7mm
Parameter Value
VA-B, differential voltage drop 0V to ±100V
IPEAK ±60mA
TON ≤20ns
TOFF ≤20ns
Specications
RX1 RX2 RX3 RX4 RX5 RX6 RX7 RX8
Pin 9
Pin 8
Pin 16
Pin 1
TX
1 T X2 TX3 TX4 TX5 T X6 TX7 TX8


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: MD0100DB1

Behöver du hjälp?

Om du behöver hjälp med Microchip MD0100DB1 ställ en fråga nedan och andra användare kommer att svara dig