Microchip MIC2299 Bruksanvisning
Microchip
Inte kategoriserad
MIC2299
Läs gratis den bruksanvisning för Microchip MIC2299 (14 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6.5 recensioner. Har du en fråga om Microchip MIC2299 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/14
MIC2299
3.5A Minimum, 2MHz High Brightness
LED Driver
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (
408
) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
October 2007
M9999-101907-B
General Description
The MIC2299 is a high power boost-switching regulator
that is optimized for constant-current control. The MIC2299
is capable of driving up to 2 series 1A white LED for
photoflash and other applications. The feedback voltage is
only 200mV, minimizing power dissipation in constant-
current control applications, and hence extends battery
life.
The MIC2299 has a brightness pin that allows for a
programmable torch mode as well as full flash with a
single pin when driving high current LEDs.
The MIC2299 implements a constant frequency 2MHz
PWM control scheme to make the smallest possible
design. The MIC2299’s 2MHz operation avoids signal
interference in the AM band.
The 2.5V to 10V input voltage range of MIC2299 allows
direct operation from 1- and 2-cell Li-Ion as well as 3- to 4-
cell NiCad/ NiMH/ Alkaline or lithium batteries. Maximum
battery life is assured with a low 1uA shutdown current.
The MIC2299 is available in a low profile 12-pin 3mm x
3mm MLF
®
package.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
• Programmable current control
• 200mV ±10% feedback voltage
• 2.5V to 10V input voltage
• Output over-voltage protection (OVP)
• Output voltage up to 30V (max)
• Fixed 2MHz Operation
• Guaranteed 3.5A switch current over-temperature
• Solution size of just 0.25in
2
(1.6cm
2
)
• Output power range of 7W to 12W
• <1% line regulation
• 1µA shutdown current
• Over temperature protection
• Externally programmable soft-start
• Under-voltage lockout (UVLO)
• 12-pin 3mm x 3mm leadless MLF
®
package
• –40
°
C to +125
°
C junction temperature range
Applications
• Cell phones
• PDAs
• Digital cameras
• White LED flashlights
___________________________________________________________________________________________________________
Typical Application
Figure 1. High Power White LED Driver
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | MIC2299 |
Behöver du hjälp?
Om du behöver hjälp med Microchip MIC2299 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
12 Mars 2025
12 Mars 2025
6 Mars 2025
5 Mars 2025
4 Mars 2025
4 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
Inte kategoriserad Manualer
- Hotpoint
- X-Sense
- Cougar
- Nemef
- EBS
- Luxul
- Aguilar
- Albrecht
- Logicom
- Ozone
- Polarlite
- Crest Audio
- Sodastream
- BLUEPALM
- Patching Panda
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025