Microchip MIC23050 Bruksanvisning
Microchip
Inte kategoriserad
MIC23050
Läs gratis den bruksanvisning för Microchip MIC23050 (15 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3.5 recensioner. Har du en fråga om Microchip MIC23050 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
MIC23050
4MHz PWM Buck Regulator with
HyperLight Load™ Switching Scheme
y, Inc. Protected by US Patent No. 7064531
l +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
HyperLight Load is a trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technolog
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • te
September 2011
General Description
The Micrel MIC23050 is a high-efficiency, 600mA, PWM,
synchronous buck (step-down) regulator featuring the
HyperLight Load™ patented switching scheme that offers
best-in-class light load efficiency and transient
performance while providing very-small external
components and low output ripple at all loads.
The MIC23050 also has a very-low typical quiescent
current draw of 20µA and can achieve over 89% efficiency
even at 1mA. The device allows operation with a tiny
inductor ranging from 0.47µH to 2.2µH and uses a small
output capacitor that enables a sub-1mm height.
In contrast to traditional light load schemes, the HyperLight
Load™ architecture does not need to trade off control
speed to obtain low standby currents and in doing so the
device only needs a small output capacitor to absorb the
load transient as the powered device goes from light load
to full load.
At higher loads the MIC23050 provides a constant
switching frequency of greater than 4MHz while providing
peak efficiencies greater than 93%.
The MIC23050 comes in fixed output voltage options from
0.72V to 3.3V eliminating external feedback components.
The MIC23050 is available in an 8-pin 2mm x 2mm MLF ®
with a junction operating range from –40° °C to +125 C.
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
• Input voltage: 2.7V to 5.5V HyperLight Load™
• 600mA output current
• Fixed output voltage from 0.72V to 3.3V
• Ultra-fast transient response
• 20µA typical quiescent current
• 4MHz in PWM in constant-current mode
• 0.47µH to 2.2µH inductor
• Low voltage output ripple
− 25mVPP in HyperLight Load™ mode
− 3mV output voltage ripple in full PWM mode
• >93% efficiency
• ~89% at 1mA
• Micropower shutdown
• Available in 8-pin 2mm x 2mm MLF®
• ° ° –40 C to +125 C junction temperature range
Applications
• Cellular phones
• Digital cameras
• Portable media players
• Wireless LAN cards
• WiFi/WiMax/WiBro modules
• USB-powered devices
____________________________________________________________________________________________________________
Typical Application
1 M9999-092211-E
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | MIC23050 |
Behöver du hjälp?
Om du behöver hjälp med Microchip MIC23050 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
12 Mars 2025
12 Mars 2025
6 Mars 2025
5 Mars 2025
4 Mars 2025
4 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
2 Mars 2025
Inte kategoriserad Manualer
- Axler
- Sanli
- Black Diamond
- BeeSecure
- Raclet
- Losi
- Naish
- Suntec
- La Crosse Technology
- Crane Song
- Meross
- Diana
- Aspen
- Grohe
- Oster
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025