Microchip PIC18F26K83 Bruksanvisning


Läs gratis den bruksanvisning för Microchip PIC18F26K83 (27 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5 recensioner. Har du en fråga om Microchip PIC18F26K83 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/27
TB3194
PIC16/PIC18 ADC² Technical Brief
Introduction
Author: Christopher Best, Microchip Technology Inc.
An Analog-to-Digital Converter (ADC) converts an analog input signal into a digital number representing
the magnitude of the input voltage. Microchip’s 12-bit ADC with Computation (ADC 2) outputs a 12-bit
binary representation of the original signal and adds special hardware features to provide post-processing
functions that can be performed on the conversion result.
This technical brief provides an overview of the basic ADC features and functions, and describes the
additional computation features that are not found in other ADC modules. This document will not cover
the Capacitive Voltage Divider (CVD) feature, which is covered in TB3198, but may refer to CVD in
general terms. This technical brief will cover the ADC2 module found in Microchip’s PIC16 and PIC18 8-
bit architecture.
© 2018 Microchip Technology Inc. 90003194A-page 1


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: PIC18F26K83

Behöver du hjälp?

Om du behöver hjälp med Microchip PIC18F26K83 ställ en fråga nedan och andra användare kommer att svara dig