Middle Atlantic 5-RS20 Bruksanvisning


Läs gratis den bruksanvisning för Middle Atlantic 5-RS20 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 6.5 recensioner. Har du en fråga om Middle Atlantic 5-RS20 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
5-RS Series
5-RS Runner Kits
Instruction Sheet
PART QTY
Pair of Runners 2
Phillips Head Screws 6
1/4-20 Flange Nuts 6
1) Install the runners using the two outer holes.
2) Drill into the center holes using a 9/32" drill bit.
3) Install the remaining nuts and bolts.
1) Install the runners to the enclosure bottom through the holes
shown using the supplied hardware. (FIGURE A)
2) Install the screws and nuts as shown. (FIGURE B)
NOTE: If your Slim 5 does not have the center holes, perform the
following steps:
SLIM 5 SERIES INSTALLATION
SLIM 5 SERIES
RUNNER KITS
5-RS20
5-RS26
FIGURE A
DTRK SERIES
RUNNER KIT
5-RS18
SLIM 5 BOTTOM SHOWN
FIGURE B
CFR/HRF SERIES
RUNNER KITS
5-RS14 (HRF Only)
5-RS16
5-RS18
5-RS20
5-RS23
I-00273 Rev E


Produktspecifikationer

Varumärke: Middle Atlantic
Kategori: Inte kategoriserad
Modell: 5-RS20

Behöver du hjälp?

Om du behöver hjälp med Middle Atlantic 5-RS20 ställ en fråga nedan och andra användare kommer att svara dig