Midea MLH52N4AWW Bruksanvisning

Midea tvättmaskin MLH52N4AWW

Läs gratis den bruksanvisning för Midea MLH52N4AWW (84 sidor) i kategorin tvättmaskin. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3.5 recensioner. Har du en fråga om Midea MLH52N4AWW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/84

Washer

MODEL NUMBER

www.midea.com /ca

USER MANUAL &

INSTALLATION

INSTRUCTIONS

Warning:

Before using this product,

please read this manual carefully

and keep it for future reference.

The design and speciﬁcations

are subject to change without

prior notice for product

improvement. Consult with your

dealer or manufacturer for

details.

Power supply: 120V

Circuit: 16-amp branch

MLH52N4AWW

Dear user

WASHER SAFETY ..............................................................................3

Proper Installation ....................................................................................5

When Not in Use .......................................................................................5

OPERATION REQUIREMENTS .........................................................6

Location of Your Washer .......................................................................6

Electrical Requirements .........................................................................6

Water Supply Requirements ................................................................7

Drain Requirements .................................................................................7

INSTALLATION INSTRUCTIONS ......................................................8

Before You Begin ......................................................................................8

Tools Required ...........................................................................................8

Parts Required (Obtain Locally) .........................................................9

Parts Supplied............................................................................................9

Rough-In Dimensions ..............................................................................9

Unpacking the Washer .........................................................................10

Installing the Washer ..............................................................................11

WASHER USE ...................................................................................13

Control Panel ............................................................................................13

Features .....................................................................................................20

Loading and Using the Washer ........................................................23

THANK YOU CONGRATULATIONS and on your purchase of

this high-quality Midea product. Your Midea washer is designed

for reliable, trouble-free performance. Please take a moment to

https://www.midea.com/ca/support/Product-registration

For future reference, record your product model and serial

numbers located on the inside frame of the washer.

Model Number________________________________________

Serial Number_________________________________________

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

WASHER CARE ................................................................................24

Cleaning ....................................................................................................24

Moving, Storage and Long Vacations ............................................28

BEFORE YOU CALL FOR SERVICE... ............................................29

Error Codes ..............................................................................................36

WARRANTY .....................................................................................37

PRODUCT REGISTRATION .............................................................39

WASHER SAFETY

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY

IMPORTANT

To prevent injury to the user or other people and property damage, the

instructions shown here must be followed. Incorrect operation due to

ignoring of instructions may cause harm or damage, including death.

The level of risk is shown by the following indications.

CAUTION

WARNINGWARNING

WARNING

This symbol indicates the possibility of dangerous voltage

constituting a risk of electrical shock is present that could

result in death or serious injury.

This symbol indicates the possibility of injury or damage to

property.

This symbol indicates the possibility of death or serious

injury.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of death, ﬁre, explosion, electric shock, or injury

to persons when using your vfd appliance, follow basic precautions,

including the following:

Read the instruction manual before using the appliance.

•

DO NOT wash or dry articles that have been previously cleaned in,

•

washed in, soaked in or spotted with gasoline, dry-cleaning solvents,

or other ﬂammable or explosive substances, as they give oﬀ vapors

that could ignite or explode.

DO NOT add gasoline, dry-cleaning solvents, or other ﬂammable or

•

explosive substances to the wash water. These substances give oﬀ

vapors that could ignite or explode.

Under certain conditions, hydrogen gas may be produced in a

•

hot-water system that has not been used for 2 weeks or more.

HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a washing machine, turn

on all hot-water faucets and let the water ﬂow from each for several

minutes. This will release any accumulated hydrogen gas. As the gas

is ﬂammable, DO NOT smoke or use an open ﬂame during this time.

DO NOT allow children to play on or in this appliance. Close

•

supervision of children is necessary when this appliance is used near

children. Before the washer is removed from service or discarded,

remove the door or lid. Failure to follow these instructions may result

in death or injury to persons.

DO NOT reach into the appliance if the drum or other components

•

are moving to prevent accidental entanglement.

DO NOT install or store this appliance where it will be exposed to the

•

weather.

DO NOT tamper with controls, repair or replace any part of this

•

appliance or attempt any servicing unless speciﬁcally recommended

in the user maintenance instructions or in published user repair

instructions that you understand and have the skills to carry out.

Keep the area around your appliance clean and dry to reduce the

•

possibility of slipping.

DO NOT operate this appliance if it is damaged, malfunctioning,

•

partially disassembled, or has missing or broken parts including a

damaged cord or plug.

Unplug the appliance or turn oﬀ the circuit breaker before servicing.

•

Pressing the Power button DOES NOT disconnect power.

See “Electrical Requirements” located in the Installation Instructions

•

for grounding instructions. This appliance is not intended for use

by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children should be

supervised to ensure that they do not play with appliance.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

If the supply cord is damaged, it must be replaced by the

•

manufacture, its service agent or similarly qualiﬁed persons in order

to avoid a hazard.

The new hose-sets bought from the retailer where the product was

•

purchased are to be used and that old hose-sets should not be

reused.

This appliance is for indoor use only.

•

PROPER INSTALLATION

This washer must be properly installed and located in accordance

•

with the Installation Instructions before it is used. Ensure the cold

water hose is connected to the “C” valve.

Install or store where it will not be exposed to temperatures below

•

freezing or exposed to the weather, which could cause permanent

damage and invalidate the warranty.

Properly ground washer to conform with all governing codes and

ordinances. Follow details in installation instructions.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

•

Do not remove the ground prong.

•

Do not use an adapter.

•

Do not use an extension cord.

•

Failure to do so can result in death, ﬁre or electrical

•

shock.

WHEN NOT IN USE

Turn oﬀ water faucets to minimize leakage if a break or rupture should

occur. Check the condition of the ﬁll hoses; We recommend changing the

hoses every 5 years.

State of California Proposition 65 Warnings:

WARNING: Cancer and Reproductive Harm

-www.P65Warnings.ca.gov.

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

SAVE THES E IN STUCTIONS

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

OPERATION REQUIREMENTS

LOCATION OF YOUR WASHER

DO NOT INSTALL THE WASHER:

1. In an area exposed to dripping water or outside weather conditions.

The ambient temperature should never be below 60°F (15.6 ) for ℃

proper washer operation.

2. In an area where it will come in contact with curtains or drapes.

3. On carpet. The ﬂoor MUST be a hard surface with a maximum slope

of 1/2" per foot (1.27 cm per 30 cm). To make sure the washer does not

vibrate or move, you may have to reinforce the ﬂoor.

NOTE: If ﬂoor is in poor condition, use 3/4" impregnated plywood sheet

solidly attached to the existing ﬂoor covering.

IMPORTANT: MINIMUM INSTALLATION CLEARANCES

• When installed in alcove: Top and Sides = 0" (0 cm), Back = 3" (7.6 cm)

• When installed in closet: Top and Sides = 0" (0 cm), Front = 2" (5 cm),

Back = 3" (7.6 cm)

• Closet door ventilation openings required: 2 louvers each 60 square in.

(387 cm), located 3" (7.6 cm) from top and bottom of door

ELECTRICAL REQUIREMENTS

Read these instructions completely and carefully.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK AND PERSONAL

INJURY:

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG

•

WITH THIS APPLIANCE. Washer must be electrically grounded in

accordance with local codes and ordinances.

CIRCUIT - Individual, properly polarized and grounded 16-amp branch

circuit fused with 16-amp time -delay fuse or circuit breaker.

POWER SUPPLY - 2-wire with ground, 120V, single-phase, 60Hz,

alternating current.

OUTLET RECEPTACLE - Properly grounded receptacle located so the

power supply cord is accessible when the washer is in an installed

position.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

GROUNDING REQUIREMENTS

Improper connection of the equipment grounding conductor can result

in a risk of electrical shock. Check with a licensed electrician if you are in

doubt as to whether the appliance is properly grounded.

1. The washer be grounded. In the event of malfunction or MUST

breakdown, grounding will reduce the risk of electrical shock by

providing a path of least resistance for electrical current.

2. Since your washer is equipped with a power supply cord having an

equipment-grounding conductor and a grounding plug, the plug

MUST be plugged into an appropriate, copper-wired receptacle that

is properly installed and grounded in accordance with all local codes.

If in doubt, call a licensed electrician. cut oﬀ or alter the DO NOT

grounding prong on the power supply cord. In situations where a two-

slot receptacle is present, it is the owner’s responsibility to have a

licensed electrician replace it with a grounding-type properly grounded

receptacle.

WATER SUPPLY REQUIREMENTS

Hot and cold water faucet MUST be installed within 42" (107 cm) of your

washer’s water inlet. The faucet MUST be 3/4" (1.9 cm) garden hose-type so

inlet hoses can be connected. Water pressure MUST be between 10 and 120

psi. Your water department can advise you of your water pressure.

DRAIN REQUIREMENTS

1. Drain capable of eliminating 64.3 L per minute.

2. A standpipe diameter of 1-1/4" (3.18 cm) minimum.

3. The standpipe height above the ﬂoor should be:

Minimum height: 24" (61 cm)

Maximum height: 47.24" (120 cm)

BACK

47.24''

(120 cm)

Max.

24''

(61 cm)

Min.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT - Save these instructions for local

•

inspector’s use.

IMPORTANT - Observe all governing codes and

•

ordinances.

Be sure to leave these instructions with the

• Note to Installer -

Consumer.

Keep these instructions for future reference.

• Note to Consumer -

Skill level - Installation of this appliance requires basic mechanical

•

and electrical skills.

Completion time - 1-3 hours.

•

Proper installation is the responsibility of the installer.

•

• Product failure due to improper installation is not covered under the

Warranty.

FOR YOUR SAFETY:

WARNING

• This appliance must be properly grounded and installed as described

in these Installation Instructions.

• Do not install or store the appliance in an area where it will be exposed

to water/weather. See the Location of Your Washer section.

• NOTE: This appliance must be properly grounded, and electrical

service to the washer.

TOOLS REQUIRED

• A djustable wrench or 1/2 "(13mm) socket with ratchet

• Adjustable wrench or 9/16 " (14mm) open-end wrench

• Channel-lock adjustable pliers

• Carpenter’s level

Certain internal parts are intentionally not grounded and may

• present a risk of electric shock only during servicing. Service

Personnel - Do not contact the following parts while the appliance

is energized: Electrical Valve, Drain Pump, Heater and Motor.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

PARTS REQUIRED (OBTAIN LOCALLY)

Water Hose (2)

PARTS SUPPLIED

Cable Tie

Inlet Hose Screen Washers(2)

Drain Hose Guide

ROUGH-IN DIMENSIONS

27.0''

(68.6 cm)

39.8''

(101.09 cm)

SIDE

34.2''

(86.9cm)

39.8''

(101.09 cm)

∗NOTE: With pedestal, 52.6"

Stacked, 84"

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

UNPACKING THE WASHER

WARNING:

Recycle or destroy the carton and plastic bags after the washer is

•

unpacked. Make materials inaccessible to children. Children might

use them for play. Cartons covered with rugs, bedspreads or plastic

sheets can become airtight chambers causing suﬀocation.

1. Cut and remove the top and bottom packaging straps.

2. While it is in the carton, carefully lay the washer on its side. DO NOT

lay the washer on its front of back.

3. Turn down the bottom ﬂaps-remove all base packaging, including the

cardboard, styrofoam base and styrofoam tub support (inserted in

center of base).

NOTE: If you are installing a pedestal, proceed to the installation

instructions that come with the pedestal.

4. Carefully return the washer to an upright position and remove the

carton.

5. Carefully move the washer to within 4 feet (122 cm) of the ﬁnal

location.

6. Remove the following from the back side of the washer:

4 bolts

4 plastic spacers (including rubber grommets)

4 power cord retainers

IMPORTANT: Failure to remove the shipping bolts* can cause the washer

to become severely unbalanced.

Save all bolts for future use.

* Any damages from failure to remove the shipping bolts are not covered by the

warranty.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

NOTE: If you must transport the washer at a later date, you must reinstall

the shipping support hardware to prevent shipping damage. Keep the

hardware in the plastic bag provided.

INSTALLING THE WASHER

1. Run some water from the cold faucet to ﬂush the water lines and

remove particles that might clog up the inlet hose.

2. Ensure there is a rubber washer in the hoses. Reinstall the rubber

washer into the hose ﬁtting if it has fallen out during shipment.

Do not crossthread or over-tighten these connections.

3. Install the screen washers by inserting them into the free ends of the

inlet hoses with protruded side facing the faucet.

4. Connect the inlet hose ends to the HOT and COLD water faucets

tightly by hand, then tighten another 2/3 turn with pliers. Turn the water

on and check for leaks.

5. Carefully move the washer to its ﬁnal location. Gently rock the washer

into position ensuring inlet hoses do not become kinked. It is important

not to damage the rubber leveling legs when moving your washer to

its ﬁnal location. Damaged legs can increase washer vibration. It may

be helpful to spray window cleaner on the ﬂoor to help move your

washer into its ﬁnal position.

NOTE: To reduce vibration, ensure that all four rubber leveling legs are

ﬁrmly touching the ﬂoor. Push and pull on the back right and then back

left of your washer.

Carefully connect the inlet hose marked HOT to the rear “H” inlet

of the water valve.Tighten by hand;then tighten another 2/3 turn

with pliers.And COLD to the rear “C” inlet of the water valve.

Tighten by hand;then tighten another 2/3 turn with pliers.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

NOTE: Do not use the dispenser drawer or door to lift the washer.

NOTE: If you are installing into a drain pan, you can use a 24-inch long 2x4

to lever the washer into place.

6. With the washer in its ﬁnal position, place a level on top of the washer

(if the washer is installed under a counter, the washer should not be

able to rock). Adjust the front leveling legs up or down to ensure the

washer

is resting solid. Turn the lock

nuts on each leg up towards the

base of the washer and snug with a wrench.

NOTE: Keep the leg extension at a minimum to prevent excessive

vibration. The farther out the legs are extended, the more the washer

will vibrate.

If the ﬂoor is not level or is damaged, you may have to extend the rear

leveling legs.

7. Attach the U-shaped hose guide to the end of the drain hose. Place

the hose in a laundry tub or standpipe and secure it with the cable tie

provided in the enclosure package.

Cable

Tie Cable

Tie

Cable

NOTE: Placing the drain hose too far down the drain pipe can cause a

siphoning action. No more than 7 inch (17.78 cm) of hose should be in

the drain pipe. There must be an air gap around the drain hose. A snug

ﬁt can also cause a siphoning action.

8. Plug the power cord into a grounded outlet.

NOTE: Check to be sure the power is oﬀ at the circuit breaker/fuse box

before plugging the power cord into an outlet.

9. Turn on the power at the circuit breaker/fuse box.

10. Read the rest of this Owner’s Manual. It contains valuable and helpful

information that will save you time and money.

11. Before starting the washer, check to make sure:

Main power is turned on.

•

The washer is plugged in.

•

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

12. Run the washer through a complete cycle.

13. If your washer does not operate, please review the Before You Call For

Service section before calling for service.

14. Place these instructions in a location near the washer for future

reference.

WASHER USE

CONTROL PANEL

The water faucets are turned on.

The unit is level and all four leveling legs are ﬁrmly in the ﬂoor.

The shipping support hardware is removed and saved.

The drain hose is properly tied up.

•

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

QUICK START

Press the Power button.

If the screen is dark, a press of the Power

button will “wake up” the display.

Select a wash cycle. (Defaults are set for

each cycle. These default settings can be

changed. See Control setting for more

information).

CONTROL SETTING

Power

Press to “wake up” the display. If the display is active, press to put

the washer into standby mode.

NOTE: Pressing Power does not disconnect the appliance from the

power supply.

Press the Pause/Add a Garment button.

W ash Cycles

The wash cycles are optimized for speciﬁc types of wash loads. The

chart below will help you match the setting with the loads.

Normal/

Colors*

For heavily to lightly soiled colorfast cottons, household

linens, work and play clothes.

NOTE: This is the most common cycle.

Bulky/

Sheets*

For large items such as comforters, blankets, small rugs

and similar bulky items.

Heavy

Duty*

Washing the large and heavy clothing, such as overcoats

or towels.

Whites* For heavily to lightly soiled white laundry, work and play

clothes

Towels* For items such as towels, sheets, pillowcases and dish

rags.

Quick Wash For lightly soiled items needed in a hurry. Cycle time

is approximately 40 minutes, depending on selected

options.

Delicates For delicate, washable textiles, e.g. made of silk, satin,

synthetic ﬁbers or blended fabrics.

Sportswear Washing the activewear.

Tub Clean Use for cleaning the basket of residue and odor.

Recommended use of at least once per month.

NOTE: Never load laundry white using Tub Clean. The

laundry may become damaged See the Care and Cleaning

section.

Rinse &

Spin

To quickly rinse and spin out any items at any time.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

SOIL LEVEL

Change the level to Soil

increase or decrease the

wash time to remove

diﬀerent amounts of soil.

To change the level, Soil

press the level button Soil

until you have reached

the desired setting. You

can choose between

Extra Light, Light,

Medium, Heavy or Extra

Heavy soil levels.

WASH TEMP

Adjust to select the proper

main water temperature

for the wash cycle. The

PreWash rinse water is

always cold to help reduce

energy usage and reduce

setting of stains and

wrinkles.

Follow the fabric

manufacturer’s care label

when selecting the wash

temperature.

To change the wash

temperature, press the

wash Temp button until

you have reached the

desired setting.

By design, to protect

fabrics, not all wash

temperatures are available

for certain wash cycles.

SPIN SPEED

Changing the speed Spin

changes the ﬁnal spin

speed of the cycles.

Always follow the garment

manufacturer’s care label

when changing the Spin

speed.

To change the Spin

speed, press the Spin

speed button until you

have reached the desired

setting. You can choose

between No Spin, Low,

Medium, High or Extra

High. Higher spin speeds

are not available on certain

cycles, such as Delicates.

Higher spin speeds

remove more water from

the clothes and will help

reduce dry time, but may

also increase the possibility

of setting wrinkles on some

fabrics.

Tap Cold,Cold,Eco Warm,

You can choose between

Warm or Hot.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

SIGNAL Use the pad to Signal

turn the on or oﬀ Signal

all knob turns and button

WATER

PLUS

Increases the water level

of the main wash.

To use:

1. Turn power ON and

select a wash cycle.

2. Water Select the Add

Plus button to activate

water plus.

SPEED

WASH

This option reduces the

overall washer cycle time

by optimizing the wash,

rinse and spin actions and/

or gently raising the wash

temperature to get clothes

cleaned faster. Option

is available on Normal/

Colors, Bulky/Sheets,

Heavy Duty, Whites,

Towels or Sportswear

cycles.

Total wash time will vary

based on cycle chosen and

options selected.

To use:

1. Turn power on and

select a wash cycle

which has as Speed Wash

an option.

2. Make any adjustments

to Soil, Temp and Spin

as desired.

3. Press the Speed Wash

button to reduce the

overall wash time.

EXTRA

RINSE

This option allows for an

extra rinse during a cycle

to remove excess dirt and

detergent from soiled

loads.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Press the button.

Option is available on

Normal/Colors,Bulky/

Sheets,Heavy Duty,Whites,

Towels,Delicates,

Sportswear

presses.

Turn ,signal beeps Signal on

means it is an acceptable

option,and a double beeps

means not an acceptable

option.

PRE SOAK

For soaking your

garments prior to the

wash cycle.This option

begins with a brief tumble

and then proceeds to

soak the clothes with

water and detergent for a

speciﬁed period of time.

Once complete, the cycle

will begin automatically.

Pre Soak must be selected

The Pre Soak time will add

an additional 0 minutes 10-2

to the overall wash time.

High-eﬃciency detergent

from the main wash

compartment in the

dispenser is used for the

Pre Soak period and main

wash cycle.

EXTRA

RINSE and

PRE SOAK

You can lock the controls

to prevent any selections

from being made. Or you

can lock or unlock the

controls after you have

started a cycle.

Children cannot

accidentally start the

washer by touching

buttons with this option

selected.

To lock the washer, press

and hold the Extra Rinse

and Pre Soak buttons for

3 seconds.

To unlock the washer

controls, press and hold

Extra Rinse and Pre Soak

buttons for 3 seconds.

NOTE: PowerThe button

can still be used when the

machine is locked.

MY CYCLE

To save a favorite cycle,

set the desired setting

for wash cycle, soil level,

spin speed and wash temp

settings and hold down

the My Cycle button for

3 seconds, A beep will

sound to indicate the

cycle has been saved.

To use your custom cycle,

press the button My Cycle

before washing a load.

To change the saved cycle,

set the desired setting and

hold down the My Cycle

button for 3 seconds.

NOTE: My When using

Cycle, wash options cannot

be modiﬁed after the cycle

has been started.

NOTE: If you change wash

options with My Cycle

before starting the cycle,

the My Cycle light will

turn oﬀ and you will be

returned to the base cycle.

prior to pressing

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

button.

DELAY

You can delay the start

of a wash cycle for up to

24 hours. Press the Delay

Wash button to choose

the amount of time you

want to delay the start of

the wash cycle. Once the

desired time is reached,

press the button. The

machine will count down

and start automatically at

the correct time.

NOTE: If you forget to close

the door, a double beep will

sound when pressing

pause/add garment button.

NOTE: If you open the door

when the delay is counting

down, the machine will

enter the pause state.

You must close the door

and press

again in order to restart

the countdown.

Display Displays the approximate

time remaining until the

end of the cycle.

NOTE: The cycle time

is aﬀected by the water

pressure in your home and

the balance of the load

in the washer. You may

see the time remaining

on the display increase to

accommodate a slower

spin speed to handle

unbalanced loads.

B A

C D

Cycle status is also

displayed and certain

features such as Delay

Wash or Steam are shown

indicating they have been

selected.

Press to start a wash

cycle. If the washer is

running,pressing it once

will pause the washer.

Press again to restart the

wash cycle.

If you want add a

garment,please press the

The washer will unlock the

door. Press again to restart

the cycle.

NOTE: In some cycles the

washer will drain ﬁrst,then

unlock the door when it is

paused.

NOTE: The washer

performs automatic system

checks after pressing the

You may hear the door lock

and unlock before water

ﬂows this is normal. ,

Wash Time Delay Time

End Error

ADisplay

BRemain-Delay

CChild Lock

DDoor Lock

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

button

button. button.

Pre

FEATURES

THE DISPENSER DRAWER

Slowly open the dispenser drawer by pulling it out until it stops.

After adding laundry products, slowly close the dispenser drawer. Closing

the drawer too quickly could result in early dispensing of the bleach,

fabric softener or detergent.

You may see water in the dispenser drawer at the end of the cycle. This

is a result of the ﬂushing/siphoning action and is part of the normal

operation of the washer.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

NOTE: Liquid detergent will drain into the washer drum as it is added.

Detergent usage may need to be adjusted for water temperature,

•

water hardness, size and soil level of the load. Avoid using too much

detergent in your washer as it can lead to over sudsing and detergent

residue being left on the clothes.

The Detergent Compartment

High-efﬁcient detergent is required for this washer.

•

Use the detergent manufacturer’s recommended amount.

Add measured detergent to the front left detergent compartment of

•

the dispenser drawer.

Detergent is ﬂushed from the dispenser at the beginning of the wash

•

cycle. Either powdered or liquid detergent can be used.

Powder Detergent-Remove the Detergent selection insert and place

•

it in a safe location outside of the washer. Follow the detergent

manufacturer’s instructions when measuring the amount of powder to

use.

Detergent usage may need to be adjusted for water temperature,

•

water hardness, size and soil level of the load. Avoid using too much

detergent in your washer as it can lead to oversudsing and detergent

residue being left on the clothes.

Using more detergent than the recommended quantity can cause

•

residue buildup on your washer.

Liquid Detergent - Locate the concentration of your detergent on

•

the bottle. Place the Detergent selection insert in the corresponding

location depending on the concentration.

DETERGENT SO

LIQUID 3X 2X 1X

remove for powder

Normal

HE Liquid

Detergent

Setting

2X HE Liquid

Detergent Setting

(most common

setting)

3X HE

Liquid

Detergent

Setting

Remove for powder detergent

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

The Liquid Bleach Compartment

IMPORTANT: Be sure to identify the correct compartment for bleach

before using.

If desired, measure out the recommended amount of liquid bleach, not

to exceed 1/3 cup (80 ml), and pour into the right compartment labeled

“LIQUID BLEACH”.

Do not exceed the maximum ﬁll line. Overﬁlling can cause early

dispensing of the bleach which could result in damaged clothes.

NOTE: Do not use powdered bleach in the dispenser.

The Fabric Softener Compartment

IMPORTANT: Be sure to identify the correct compartment for fabric

softener before using.

If desired, pour the recommended amount of liquid fabric softener into

the compartment labeled “FABRIC SOFTENER”.

Use only liquid fabric softener in the dispenser.

Dilute with water to the maximum ﬁll line.

Do not exceed the maximum ﬁll line. Overﬁlling can cause early

dispensing of the fabric softener which could stain clothes.

NOTE: Do not pour fabric softener directly on the wash load.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

LOADING AND USING THE WASHER

Always follow fabric manufacturer’s care label when laundering.

SORTING WASH LOADS

Sort laundry into loads that can be washed together.

COLOURS SOIL FABRIC LINT

Whites

Lights

Darks

Heavy

Normal

Light

Delicates

Easy Care

Sturdy Cottons

Lint

Producers

Lint

Collectors

Combine large and small items in a load. Load large items ﬁrst. Large

•

items should not be more than half the total wash load.

Washing single items is not recommended. This may cause an out-of-

•

balance load. Add one or two similar items.

Pillows and comforters should not be mixed with other items. This may

•

cause an out-of-balance load.

WARNING

Fire Hazard

Never place items in the washer that are dampened

•

with gasoline or other ﬂammable liquids.

No washer can completely remove oil.

•

Do not dry anything that has ever had any type of oil

•

on it (including cooking oils).

Doing so can result in death, explosion, or ﬁre.

•

PREPARING CLOTHES

To avoid snags during washing:

Follow these steps to maximize garment care.

Close garment zippers, snaps, buttons and hooks.

•

Mend seams, hems, tears.

•

Empty all items from pockets.

•

Remove nonwashable garment accessories such as ornaments and

•

nonwashable trim materials.

To avoid tangling, tie strings, draw ties and belt-like materials.

•

Brush away surface dirt and lint.

•

Promptly wash wet or stained garments to maximize results.

•

Use nylon mesh garment bags to wash small items.

•

Wash multiple garments at one time for best results.

•

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

LOADING THE WASHER

Wash drum may be fully loaded with loosely added items. Do not wash

fabrics containing ﬂammable materials (waxes, cleaning ﬂuids, etc.).

To add items after washer has started, press and wait until the door

is unlocked. The washer may take up to 30 seconds to unlock the door

after pressing depending on the machine conditions.

Do not try to force open the door when it is locked.

After the door unlocks, open gently. Add items, close the door and press

to restart.

WASHER CARE

CLEANING

EXTERIOR

Immediately wipe oﬀ any spills. Wipe with damp cloth. Do not hit surface

with sharp objects.

INTERIOR

To clean the interior of the washer, select the Tub Clean feature on the

control panel. This Tub Clean cycle should be performed, at a minimum,

once per month. This cycle will use more water, in addition to bleach, to

control the rate at which soils and detergents may accumulate in your

washer.

NOTE: Read the instructions below completely before starting the Tub

Clean cycle.

1. Remove any garments or objects from the washer and ensure the

washer basket is empty.

2. Open the washer door and pour one cup or 250 ml of liquid bleach or

other washing machine cleaner into the basket.

3. Close the door and select the Tub Clean cycle. Push the

button.

4. When the Tub Clean cycle is working, the display will show the

estimated cycle time remaining. The cycle will complete in about

90 minutes. Do not interrupt the cycle.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

5. After the cycle is complete, leave the door open slightly for better

ventilation.

If for any reason the cycle needs to be interrupted, the door will not

open immediately. Forcing open the door at this stage may cause water

to ﬂood. The door will open after the water is drained to a level where it

would not ﬂood the ﬂoor.

Tub Clean may be interrupted by pressing

A power outage in the house might also

power supply is back, the Tub Clean cycle resumes where it had stopped.

When interrupted, be sure to run a complete Tub Clean cycle before

using the washer. If the Power pad is pressed during Tub Clean,the

cycle will be lost.

IMPORTANT:

Run Tub Clean with 1 Cup (250 ml) of bleach once a month.

•

After the completion of a Tub Clean cycle, the interior of your washer

•

may have a bleach smell.

It is recommended to run a light colour load after the Tub Clean cycle.

•

DISPENSER DRAWER AREA

Detergent and fabric softener may build up in the dispenser drawer.

Residue should be removed once or twice a month.

Lock tab is visible only after drawer has been pulled open.

Remove the drawer by ﬁrst pulling it out until it stops. Then reach back

into the left rear corner of the drawer cavity and press down ﬁrmly on

the lock tab, pulling out the drawer.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

button in between cycles.

interrupt the cycle.When the

CLEANING THE PUMP FILTER

Due to the nature of the front-load washer, it is sometimes possible for

small articles to pass to the pump. The washer has a ﬁlter to capture lost

items so they are not dumped to the drain. To retrieve lost items, clean out

the pump ﬁlter.

Pump lter

1. Using a coin or ﬂat screwdriver in the notch on the door, open the

access door.

2. Place a shallow pan or dish under the pump access door and towels on

the ﬂoor in front of the washer to protect the ﬂoor. It is normal to catch

about a cup of water when the ﬁlter is removed.

3. Pull down the pour spout.

Pour

spout

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

4. Turn the pump ﬁlter counterclockwise and remove the ﬁlter. Open

slowly to allow the water to drain.

Pour

spout

5. Clean the debris from the ﬁlter.

6. Replace the ﬁlter and turn clockwise. Tighten securely.

7. Flip up the pour spout.

8. Close the access door.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

CLEANING THE DOOR GASKET

1. Open the washer door. Using both hands, press down the door gasket.

Remove any foreign objects if found trapped inside the gasket. Make

sure there is nothing blocking the holes behind the gasket.

2. While holding down the door gasket, inspect the interior gasket by

pulling it down with your ﬁngers. Remove any foreign objects if found

trapped inside this gasket. Make sure there is nothing blocking the

holes behind the gasket.

3. When you are ﬁnished cleaning the door gasket, remove your hands

and the gasket will return to the operating position.

MOVING, STORAGE AND LONG VACATIONS

Ask the service technician to remove water from drain pump and hoses.

Do not store the washer where it will be exposed to the weather. When

moving the washer, the tub should be kept stationary by using the

shipping bolts removed during installation. See Installation Instructions in

this book.

Be sure the water supply is shut oﬀ at the faucets. Drain all water from the

hoses if the weather will be below freezing.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Certain internal parts are intentionally not grounded and may present a

risk of electric shock only during servicing. Service Personnel - Do not

contact the following parts while the appliance is energized: Electrical

Valve, Drain Pump, Heater and Motor.

BEFORE YOU CALL FOR SERVICE...

Troubleshooting Tips

Save time and money! Review the charts on the following pages ﬁrst and

you may not need to call for service.

Problem Possible Cause What To Do

Not draining

Not spinning

Not agitating

Load is out of balance • Redistribute clothes and

run drain & spin or rinse

& spin.

• Increase load size if

washing small load

containing heavy and

light items.

Pump clogged • See page 26 on how to

clean the Pump Filter.

Drain hose is kinked or

improperly connected

• Straighten drain hose and

make sure washer is not

sitting on it.

Household drain may be

clogged

• Check household

plumbing. You may need

to call a plumber.

Drain hose siphoning;

drain hose pushed too far

down the drain

• Ensure there is an air gap

between hose and drain.

Leaking water Door gasket is damaged • Check to see if gasket

is seated and not torn.

Objects left in pockets

may cause damage to

the washer (nails, screws,

pens, pencils).

Door gasket not damaged • Water may drip from the

door when the door is

opened. This is a normal

operation.

• Carefully wipe oﬀ rubber

door seal. Sometimes

dirt or clothing is left in

this seal and can cause a

small leak.

Check back left of washer

for water

• If this area is wet, you

have oversudsing

condition. Use less

detergent.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Problem Possible Cause What To Do

Leaking water

(cont.)

Fill hoses or drain hose is

improperly connected

• Make sure hose

connections are tight at

washer and faucets and

make sure end of drain

hose is correctly inserted

in and secured to drain

facility.

Household drain may be

clogged

• Check household

plumbing. You may need

to call a plumber.

Dispenser clogged • Powder soap may

cause clogs inside the

dispenser and cause

water to leak out the

front of the dispenser.

Remove drawer and

clean both drawer and

inside of dispenser box.

Please refer to Cleaning

the Washer section.

Incorrect use of detergent • Use HE and correct

amount of detergent.

Dispenser box crack • If new installation, check

for crack on inside of

dispenser box.

Clothes too

wet

Load is out of balance • Redistributes clothes and

run drain & spin or rinse

& spin.

• Increase load size if

washing small load

containing heavy and

light items.

• The machine will slow

the spin speed down to

400 rpm if it has a hard

time balancing the load.

This speed is normal.

Pump clogged • See page 26 on how to

clean the Pump Filter.

Overloading • The dry weight of the

load should be less than

18 lbs.

Drain hose is kinked or

improperly connected

• Straighten drain hose and

make sure washer is not

sitting on it.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Problem Possible Cause What To Do

Clothes too

wet (cont.)

Household drain may be

clogged

• Check household

plumbing. You may need

to call a plumber.

Drain hose siphoning;

drain hose pushed too far

down the drain

• Ensure there is an air gap

between hose and drain.

Incomplete

cycle or timer

not advancing

Automatic load

redistribution

• Timer adds 3 minutes to

cycle for each rebalance.

11 or 15 rebalances may

be done. This is normal

operation. Do nothing;

the machine will ﬁnish

the wash cycle.

Pump clogged • See page 26 on how to

clean the Pump Filter.

Drain hose is kinked or

improperly connected

• Straight drain hose and

make sure washer is not

sitting on it.

Household drain may be

clogged

• Check household

plumbing. You may need

to call a plumber.

Drain hose siphoning;

drain hose pushed too far

down the drain

• Ensure there is an air gap

between hose and drain.

Loud or

unusual noise;

vibration or

shaking

Cabinet moving • Washer is designed to

move 1/4 " to reduce forces

transmitted to the ﬂoor.

This movement is normal.

All rubber leveling legs

are not ﬁrmly touching

the ﬂoor

• Push and pull on the

back right and then back

left of your washer to

check if it is level. If the

washer is uneven, adjust

the rubber leveling legs

so they are all ﬁrmly

touching the ﬂoor and

locked in place. Your

installer should correct

this problem.

Unbalanced load • Open door and manually

redistribute load. To

check machine, run rinse

and spin with no load. If

normal, unbalance was

caused by load.

Pump clogged • See page 26 on how to

clean the Pump Filter.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Problem Possible Cause What To Do

No power/

washer not

working or

dead

Washer is unplugged • Make sure cord is

plugged securely into a

working outlet.

Water supply is turned oﬀ • Turn cold faucet fully on.

Circuit breaker/fuse is

tripped/blown

• Check house circuit

breaker/fuses. Replace

fuses or reset breaker.

Washer should have

separate outlet.

Automatic self system

checks

• First time the washer is

plugged in, automatic

checks occur. It may take

up to 2 minutes before

you can use your washer.

This is normal operation.

Snags, holes,

tears, rips

or excessive

wear

Overloaded • The dry weight of the

load should be less than

18 lbs.

Pens, pencils, nails,

screws or other objects

left in pockets

• Remove loose items from

pockets.

Pins, snaps, hooks, sharp

buttons, belt buckles,

zippers and sharp objects

left in pockets

• Fasten snaps, hooks,

buttons and zippers.

Control time

wrong or

changes

This is normal • During spin the washer

may need to rebalance

the load sometimes

to reduce vibrations.

When this happens,

the estimated time is

increased causing time

left to increase or jump.

Not enough

water

This is normal • Horizontal washers do

not require the tub to ﬁll

with water like top-load

washers.

Washer

pauses or

has to be

restarted, or

washer door

is locked and

will not open

Pump clogged • See page 26 on how to

clean the Pump Filter.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Problem Possible Cause What To Do

Door unlocks

or press

and machine

doesn’t

operate

This is normal • Front-load washers start

up diﬀerently than top-

load washers, and it takes

30 seconds to check the

system. The door will lock

and unlock.

Incorrect operation • Simply open and close

the door ﬁrmly; then

press

Water does

not enter

washer or

enters slowly

Automatic self system

checks

• After is pressed,the

washer does several

system checks.

Water will ﬂow 60 seconds

after is pressed.

Water supply is turned oﬀ • Turn on water supply.

Water valve screens are

stopped up

• Turn oﬀ the water source

and remove the water

connection hoses from

the upper back of the

washer. Use a brush or

toothpick to clean the

screens in the machine.

Reconnect the hose and

turn the water back on.

Wrinkling Improper sorting • Avoid mixing heavy items

(like work clothes) with

light items (like blouses).

Overloading • Load your washer so

clothes have enough

room to move freely.

Incorrect wash cycle • Match cycle selection to

the type of fabric you are

washing (especially for

easy care loads).

Repeated washing in

water that is too hot

• Wash in warm or cold

water.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Problem Possible Cause What To Do

Grayed or

yellowed

clothes

Not enough detergent • Use correct amount of

detergent.

Not using HE (high-

efﬁciency) detergent

• Use HE detergent.

Hard water • Use hottest water safe

for fabric.

• Use a water conditioner

like Calgon brand or

install a water softener.

Detergent is not

dissolving

• Try a liquid detergent.

Dye transfer • Sort clothes by colour. If

fabric label states wash

separately unstable dyes

may be indicated.

Coloured spots Incorrect use of fabric

softener

• Check fabric softener

package for instructions

and follow directions for

using dispenser.

Dye transfer • Sort whites or lightly

coloured items from dark

colours.

• Promptly remove wash

load from washer.

Slight

variation in

metallic colour

This is normal appearance • Due to the metallic

properties of paint used

for this unique product,

slight variations of colour

may occur due to viewing

angles and lighting

conditions.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

Problem Possible Cause What To Do

Smell inside

your washer

Washer unused for a

long time, not using

recommended quality of

HE detergent or used too

much detergent

• Run a Tub Clean cycle

once a month.

• In the case of strong

smell, you may need to

run the Tub Clean cycle

more than once a month.

• Use only the amount of

detergent recommended

on the detergent

container.

• Use only HE (high-

efﬁciency) detergent.

• Always remove wet

items from the washer

promptly after machine

stops running.

• Leave the door slightly

open for the water to air

dry. Close supervision

is necessary if this

appliance is used by or

near children. Do not

allow children to play on,

with or inside this or any

other appliance.

Detergent

leak

Incorrect placement of

detergent insert

Make sure detergent insert

is properly located and

fully seated. Never put

detergent above max line.

Improper

dispensing of

softener or

bleach

Dispenser clogged Monthly clean the

dispenser drawer to

remove buildup of

chemicals.

Softener or bleach is

ﬁlled above the max line

Make sure to have the

correct amount of softener

or bleach.

Softener or bleach cap

issue

Make sure softener and

bleach cap for dispenser

are seated or they will not

work.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

ERROR CODES

Description Reason Solution

E30 Door is not closed

properly

Restart after the door is

closed.

Check if the clothes is

stuck.

E10 Water injecting problem

while washing

Check if the water pressure

is too low.

Straighten the water hoses.

Check if the inlet valve

ﬁlter is blocked.

E21 Overtime water draining Check if the drain hose is

blocked, clean drain ﬁlter.

E12 Water overﬂow Restart the washer.

EXX Others Please try again ﬁrst, call

up service line if there are

still troubles.

Washer

Safety

Operation

Requirements

Installation

Instructions Washer Use Washer Care

Troubleshooting

LIMITED WARRANTY

WHAT IS COVERED

FIRST YEAR LIMITED WARRANTY (PART

For one year from the date of purchase, if this major appliance is installed, operated and

maintained according to instructions attached to or furnished with the product, Midea America

Corporation (hereafter “Midea”) will pay for factory speciﬁed replacement parts and repair

labour to correct defects in materials or workmanship that existed when this major appliance was

purchased, or at its sole discretion replace the product. In the event of product replacement, your

appliance will be warranted for the remaining term of the original unit’s warranty period.

TEN YEAR WARRANTY INVERTER MOTOR ONL T INCLUDED

In the second through tenth years from the date of original purchase, when this major appliance

is installed, operated and maintained according to instructions attached to or furnished with

the product, Midea will pay for factory parts to replace the inverter motor if it fails and prevent

an essential function of this major appliance and that existed when this major appliance was

purchased. This is a 10 -year warranty on the parts only and does not include repair labour.

LIFETIME LIMITED WARRANTY (STAINLESS STEEL TUB)

For the lifetime of the product from the date of original purchase, when this major appliance is

installed, operated and maintained according to instructions attached to or furnished with the

product, Midea will pay for factory speciﬁed parts and repair labour for the following components

to correct non-cosmetic defects in materials or workmanship that existed when this major

appliance was purchased:

■Stainless steel tub

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT

REPAIR OR REPLACEMENT AS PROVIDED HEREIN. Service must be provided by a Midea

designated service company. This limited warranty is valid only in the 50 States of the United

States or Canada and applies only when the major appliance is used in the country in which it

was purchased. This limited warranty is eﬀective from the date of original consumer purchase.

Proof of original purchase date is required to obtain service under this limited warranty.

MIDEA

LAUNDRY

WASHER

LIMITED

WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE

IS REQUIRED TO OBTAIN WARRANTY SERVICE.

P a have e fo ole se th ll wing information available when

you call t Cuhe stome vi e r

er c Centre:

Name, address and telephone number

Model number and serial number

A clear, detailed description of the problem

Proof of purchase including dealer or retailer

name and address, and date of purchase

IF YOU NEED SERVICE:

1. Before conta u tcting s o arra ce, a te n w your rnge servi ple se de rmi e hether p od ct u re res qui

repair. S me queo sti ns o can

e a resse hou e ce e ke few te to reviewdd d wit t s rvi . Pl ase ta a minu s

the Troubleshooti ti nun cg se o an of the User M al, or email customerserviceusa@midea.com

2. All warra c ronty servi e is p vided exclusive bly y our auth ed Mide Seoriz a rvic roe P viders, he in t

U.S. a ana .nd C da

Midea Customer Service

In the U.S.A. or Canada, call 1-866-646-4332 or email customerserviceusa@midea.com.

If o tside the 50 u State es of th United States o a , co a you rize ar C nada nt ct r autho d Midea de ler to

det ther wermine whether ano arranty applies.

S AND LABOUR)

Y - LABOUR NO

LIMITED WARRANTY

WHAT IS NOT COVERED

1. Commercial, non-residential or multiple-family use, or use inconsistent with published user,

operator or installation instructions.

2. In-home Instruction on how to use your product.

3. Service to correct improper product maintenance or installation, installation not in accordance

with electrical or plumbing codes or correction of household electrical or plumbing (i.e. house

wiring, fuses, plumbing or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water ﬁlters, etc.).

5. Defects or damage caused by the use of non-genuine Midea parts or accessories.

6. Damage from accident, misuse, abuse, ﬁre, ﬂoods, electrical issues, acts of God or use with

products not approved by Midea.

7. Repairs to parts or systems to correct product damage or defects caused by unauthorized

service, alteration or modiﬁcation of the appliance.

8. Cosmetic damage including scratches, dents, chips, and other damage to appliance ﬁnishes

unless such damage results from defects in materials and workmanship and is reported to

Midea within 30 days.

9. Routine maintenance of the product.

10. Products that were purchased “as is” or as refurbished products.

11. Products that have been transferred from its original owner.

12. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments

including but not limited to high salt concentrations, high moisture or humidity or exposure to

chemicals.

13. Pick-up or delivery. This product is intended for in-home repair.

14. Travel or transportation expenses for service in remote locations where an authorized Midea

servicer is not available.

15. Removal or reinstallation of inaccessible appliances or built-in ﬁxtures (i.e. trim, decorative

panels, ﬂooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing,

removal or replacement of the product.

16. Service or parts for appliances with original model/serial numbers removed, altered or not

easily identiﬁed.

The cost of repair or replacement under these excluded circumstances shall be borne by the

customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE

YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or ﬁtness, so this limitation

may not apply to you. This warranty gives you speciﬁc legal rights, and you also may have other

rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Midea makes no representations about the quality, durability, or need for service or repair of this

major appliance other than the representations contained in this warranty. If you want a longer

or more comprehensive warranty than the limited warranty that comes with this major appliance,

you should ask Midea or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE

PRODUCT REPAIR AS PROVIDED HEREIN. MIDEA SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation

of incidental or consequential damages, so these limitations and exclusions may not apply to you.

This warranty gives you speciﬁc legal rights, and you also may have other rights that vary from

state to state or province to province.

REGISTRATION INFORMATION

PROTECT YOUR PRODUCT:

We will keep the model number and date of purchase of your new Midea product

on ﬁle to help you refer to this information in the event of an insurance claim such

as ﬁre or theft.

Please ﬁll out and return it to the following address:

Midea America Corp. 759 Bloomﬁeld Ave #386, West Caldwell, NJ 07006-6701

----------------------------------------------- (detach here) ----------------------------------------------

Name: Model#: Serial #:

Card:

Address: Date Purchased: Store / Dealer Name:

City: State: Zip: E-mail Address:

Area Code: Phone Number:

Did you purchase an additional warranty: As your Primary Residence? (Y/N)

How did you learn about this product:

Advertising

In Store Demo

Personal Demo

Information collected or submitted to us is only available to company internal employees for

purposes of contacting you or sending you emails, based on your request for information and to

company service providers for purposes of providing services relating to our communications with

you. All data will not be shared with other organizations for commercial purposes.

Midea America (Canada) Corp.

Markham, ON L3R 8V2

Customer Service 1-866-646-4332 Made in China

www.midea.com/ca/support/Product-registration

MLH52N4AWW

Sécurité de

La Laveuse

Exigences en

Matière de

Fonctionnement

Instruction

d’Installation

Utilisation de

La Laveuse

Entretien de

La Laveuse

Dépannage

ENTRETIEN DE LA LAVEUSE ........................................................ 26

Nettoyage ................................................................................................. 26

Déménagement, entreposage et vacances prolongées .........30

AVANT DE FAIRE APPEL AU SERVICE... ...................................... 31

Codes d’erreur ........................................................................................ 38

GARANTIE ....................................................................................... 39

ENREGISTREMENT DU PRODUIT .................................................. 41

SÉCURITÉ DE LA LAVEUSE

VOTRE SÉCURITÉ PERSONNELLE ET CELLE DES AUTRES

PERSONNES SONT D’UNE IMPORTANCE CAPITALE.

Pour éviter toutes blessures de l’utilisateur ou d’autres personnes et tous

dommages matériels, il est impératif de suivre les instructions dans le

présent guide. Une utilisation incorrecte de l’appareil en raison du non-

respect des instructions peut causer des blessures ou des dommages, et

même la mort.

Les indications suivantes illustrent le niveau de risque.

ATTENTION

AVERTISSEMENT

Ce symbole signale la possibilité d’une tension dangereuse

constituant un risque de choc électrique susceptible

d’entraîner la mort ou une blessure grave.

Ce symbole signale la possibilité de blessure ou de

dommages matériels.

Ce symbole signale la possibilité de mort ou de blessure

grave.

Sécurité de

La Laveuse

Exigences en

Matière de

Fonctionnement

Instruction

d’Installation

Utilisation de

La Laveuse

Entretien de

La Laveuse

Dépannage

LORSQUE PAS EN UTILISATION

Éteignez les robinets d’eau pour minimiser les fuites en cas de cassure ou

de rupture. Vériﬁez l’état des tuyaux de remplissage; nous recommandons

de changer les tuyaux tous les 5 ans.

Avertissement - Proposition 65 de l’État de Californie:

AVERTISSEMENT : Cancer et effets nocifs sur la reproduction

-www.P65Warnings.ca.gov.

CONSERVER CES INSTRUCTIONS

CET APPAREIL EST UNIQUEMENT DESTINÉ À

UN USAGE DOMESTIQUE

EXIGENCES EN MATIÈRE DE

FONCTIONNEMENT

EMPLACEMENT DE VOTRE LAVEUSE

NE PAS INSTALLER LA LAVEUSE :

1. Dans une zone exposée aux gouttes d’eau ou aux conditions

météorologiques extérieures. La température ambiante ne doit jamais

être inférieure à 15 °C (60 °F) pour un bon fonctionnement de la

laveuse.

2. Dans une zone où il entrera en contact avec des rideaux.

3. Sur tapis. Le sol DOIT être une surface dure avec une pente maximale

de 1,27 cm par 30 cm (1/2 po par pi). Pour vous assurer que la laveuse

ne vibre ni ne bouge, vous devrez peut-être renforcer le sol.

REMARQUE : Si le sol est en mauvais état, utiliser une feuille de

contreplaqué imprégnée de 3/4 po solidement ﬁxée au revêtement de sol

existant.

IMPORTANT : ESPACE MINIMAL REQUIS POUR L’INSTALLATION

• En cas d’installation dans une alcôve : Haut et côtés = 0 po (0 cm),

Arrière = 3 po (7.6 cm)

• En cas d’installation dans un placard : Haut et côtés = 0 po (0 cm),

Avant = 2 po (5 cm), Arrière = 3 po (7.6 cm)

• Ouvertures de ventilation requises : 2 persiennes de 387 cm chacune,

situées à 3 po (7,6 cm) du haut et du bas de la porte

Produktspecifikationer

Varumärke:	Midea
Kategori:	tvättmaskin
Modell:	MLH52N4AWW
Vikt:	141 g
Bredd:	38 mm
Djup:	- mm
Förpackningens bredd:	86 mm
Djuppackning:	33 mm
Förpackningshöjd:	150 mm
Internationell säkerhetskod (IP):	IP68
Mobila operativsystem som stöds:	Android, iOS
Laddare:	Ja
Batterikapacitet:	180 mAh
Typ av förpackning:	Doos
Skärm diagonal:	1.4 "
Upplösning:	- Pixels
Pekskärm:	Ja
Kompatibla minneskort:	Niet ondersteund
Nummer id:	Ja
Marknadspositionering:	Smartwatch
Inbyggda högtalare:	Nee
FM-radio:	Nee
Rundade skärmhörn:	Ja
Form:	Rechthoekig
Inbyggd mikrofon:	Nee
Batteritid/batteritid:	120 uur
Displayteknik:	IPS
Inbyggd kamera:	Nee
Färg på däck:	Zwart
Vibrerande motor:	Ja
Stegräknare:	Ja
Säkerhetsfunktioner:	Dust resistant, Splash proof, Waterproof
Pulsmätare:	Ja
Förbrända kalorier:	Ja
Tillryggalagd sträcka:	Ja
Sömnkvalitet:	Ja
SMS-meddelandet:	Ja
Mobil nätverksanslutning:	Nee
Föreslaget kön:	Unisex
Förslutningstyp:	Bandgesp met enkele pin
Färg på spännet:	Roestvrijstaal
Dikte:	12 mm
Färg på ur:	Zwart
Klockfodral storlek:	38 mm
Typ av pulssensor:	Optisch
Smarta notiser:	Ja
Termometer:	Ja
Multisport-läge:	Ja
Aktivitetsspårare:	Ja
Kalenderaviseringar:	Ja
Färgskärm:	Ja
Blodsyresensor:	Ja
Spänne material:	Roestvrijstaal
Remstorlek:	Een maat
Total längd (rem + klocka):	253 mm
Type beeldscherm:	Digitaal
Intelligent uppvaknande:	Ja