Midland MicroMobile MXAT05 Bruksanvisning

Midland Radio MicroMobile MXAT05

Läs gratis den bruksanvisning för Midland MicroMobile MXAT05 (1 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9.5 recensioner. Har du en fråga om Midland MicroMobile MXAT05 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
5900 Parretta Drive ● KANSAS CITY, MO ● 64120
PHONE: (816) 241-8500 ● FAX: (816) 241-5713
EMAIL: mail@midlandradio.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
4/26/2023
MXAT04 and MXAT05 Assembly Diagram
1. The MXAT04 and MXAT05 are designed for mounng brackets or surfaces up to 3/4" thick. substanal
2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.
3. Part B, 3/8” spacer, is oponal for mounng brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,
should be removed for brackets or surfaces more than 3/8” thick.
4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid
o the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.
5. Route the coaxial cable from the topside through the mounng hole in the bracket or surface, Part C.
6. Slide the at washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order
shown.
7. Hold the antenna assembly in posion while ghtening the hex nut, Part F. Maximum torque 35 lb-.
8. Finish roung the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259
adapter.

Produktspecifikationer

Varumärke: Midland
Kategori: Radio
Modell: MicroMobile MXAT05

Behöver du hjälp?

Om du behöver hjälp med Midland MicroMobile MXAT05 ställ en fråga nedan och andra användare kommer att svara dig