Miiego MiiBUDS ACTIVE GO Bruksanvisning

Miiego hörlur MiiBUDS ACTIVE GO

Läs gratis den bruksanvisning för Miiego MiiBUDS ACTIVE GO (20 sidor) i kategorin hörlur. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Miiego MiiBUDS ACTIVE GO eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/20
TWS EARBUDS BY MIIEGO®
Quick Start Guide
ENG
NOR
SE
1 - 2
DK
5 - 6
7 - 8
ED
FR
-
1 121
-
9 10
EST
15 - 17
NL
13 - 14
DOWNLOAD THE
MIIEGO APP
PERSONALIZE YOUR AUDIO EXPERIENCE
www.MIIEGO.com/app
MiiBUDS ACTIVE GO
ENG
1
Power your MiiBUDS ACTIVE GO earbuds ON/OFF
ON: Take out the earbuds from the charging case and they will automatically
power on OR you can manually press the PLAY-button for 3 seconds.
When ON: The blue LED will be on for 1 second and you will hear: “Power ON”.
OFF: Place the earbuds back into the charging case and close it, and they will
turn off automatically OR manually press the PLAY-button for 5 seconds.
When OFF: The red LED flashes 3 times.
Pairing Your MiiBUDS ACTIVE GO earbuds
1: Take out both earbuds from the charging case, and they will connect to each
other automatically.
2: Activate BT on your phone (or other device) and search for new BT device
and select: . MiiBUDS ACTIVE GO
3: You will hear “paired” in both earbuds and the LEDs on both earbuds will flash
blue twice every 5 seconds hereafter.
Charging Your Earbuds and the Charging Case
Earbuds: Place the earbuds into the charging case. The red LEDs on the earbuds
will be ON when charging. They will turn OFF, when the earbuds are fully charged.
Charging Case:
Use a 5V/1A USB adapter for wired charging.
Connect the charging cable on the side of the charging case (D) .
The LED indicator (B) on the charging case will indicate the battery status of
the charging case.
Wireless Charging of Charging Case: Make sure to place the Charging Case
correctly on the wireless charger. Full charging time of the charging case is
about 3-4 hours.
Play/Pause
Press the PLAY-button (A) once on either earbud.
Answer Call/ Hang Up Call/ Reject Call
Press the PLAY-button once to answer an incoming call on either earbud. Press
once again to hang up. Double press the PLAY-button to reject an incoming call.
Activate Siri on iOS-device:
Access Siri by triple-pressing the PLAY-button on either earbud.
For the best comfort and sound experience, please find
and use the ear tips that fits perfectly inside your ears.
ENG
2
A: PLAY-button
B: LED indicator charging case battery
status
C: Powerbank USB-output port
D: Charging input port (type: USB type-C)
E: LED indicator for when the earbuds are
charging
F: Volume down / Previous song
Press once / Hold
G: LED indicator
H: Volume up / Next song
Press once / Hold
SPECIFICATIONS
BT5.4 + AAC, SBC.
Frequency range: 2.402-2.480GHz.
Earbuds: rechargeable 75 mA/h Li-ion battery. Charging case: rechargeable
2200 mA/h Li-ion battery. Frequency Response: 20Hz-20KHz.
CARE, MAINTENANCE, SAFETY
WARNING: Do not use while driving or where vehicular traffic is present, or in
any other activity where failure to hear your surroundings could be dangerous.
Use of these headphones at excessive volumes may cause permanent hearing
damage. Always turn the volume down before use. Keep out of reach from
children and animals. Avoid direct sunlight. Product storage and working
temperatures: from -5 degrees to +40 degrees. Do not dispose the battery in
fire, as it may cause an explosion. Any modifications to the device will void the
user warranty and may have consequences for your safety.
This device contains a lithium accumulator.
Improper use can cause overheating and fire.
Only listen to music in a moderate volume and
in moderate periods of time. Excessive exposure
to high sound levels can lead to noise-induced
hearing loss.
H
G
F
Soft Reset:
1: Delete “ ” from the Bluetooth list on your phone/device.MiiBUDS ACTIVE GO
2: Power ON and press the PL AY-button (A) 5 times on both earbuds. Then put
them back into the charging case. Close and open the lid and take them out
again. The earbuds will re-connect to each other automatically and enter
pairing mode.
3: Select “ ” in the Bluetooth list on your phone/device.MiiBUDS ACTIVE GO


Produktspecifikationer

Varumärke: Miiego
Kategori: hörlur
Modell: MiiBUDS ACTIVE GO

Behöver du hjälp?

Om du behöver hjälp med Miiego MiiBUDS ACTIVE GO ställ en fråga nedan och andra användare kommer att svara dig