Mikrotik RB951Ui-2HnD Bruksanvisning

Mikrotik Åtkomstpunkt RB951Ui-2HnD

Läs gratis den bruksanvisning för Mikrotik RB951Ui-2HnD (4 sidor) i kategorin Åtkomstpunkt. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 15.5 recensioner. Har du en fråga om Mikrotik RB951Ui-2HnD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

RB951-series

RB951-seriesRB951-series

RouterBOARD 951 series models:

RouterBOARD 951 series models:RouterBOARD 951 series models:

RB951Ui-2HnD

RB951G-2HnD

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Exposure to Radio Frequency Radiation:

Exposure to Radio Frequency Radiation: Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an

uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the

general public.

First Steps:

This device is a simple home wireless access point. It is configured out of the box, you can simply plug in your internet cable and start using wireless

internet. We recommend you set up a password to secure your device, follow these steps.

Choose your powering solution, please see the section for possibilities.Powering

Connect your Internet cable to port 1, and local network devices to ports 2-5.

Set your computer IP configuration to (DHCP).

automatic

Wireless access point mode is enabled by default.

Connect your direct input power jack if not using POE, to start up the device.

The device will boot up and after a short beep Wireless network will be available for connecting.

Open network connections on your pc, mobile phone, or other device and search for MikroTik wireless network and connect to it.

Once connected to the wireless network, open in your web browser to start configuration, since there is no password by https://192.168.88.1

default, you will be logged in automatically .(or, for some models, check user and wireless passwords on the sticker) .

We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best

performance and stability,

Choose your country, to apply country regulation settings, and set up your password on the screen that loads.

Powering

The device accepts power from the power jack or from the first Ethernet port (Passive PoE). The power consumption for under maximum  RB951G-2HnD

load can reach 7 W,RB951Ui-2HnD24 W.

direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 8-30 V DC.

The first Ethernet port accepts passive Power over Ethernet accepts 8-30 V DC.

Produktspecifikationer

Varumärke:	Mikrotik
Kategori:	Åtkomstpunkt
Modell:	RB951Ui-2HnD
Bredd:	138 mm
Djup:	113 mm
Höjd:	29 mm
LED-indikatorer:	Ja
Processorfrekvens:	600 MHz
Frekvensband:	2.4 GHz
Strömförbrukning (max):	7 W
Internminne:	128 MB
Antal användare:	- användare (er)
Processor:	Qualcomm Atheros AR9344-DC3A
USB-anslutning:	USB Type-A
Maximal dataöverföringshastighet:	- Mbit/s
2,4 GHz:	Ja
Antal kanaler:	- kanaler
Produktens färg:	Vit
Inbyggd processor:	Ja
Datahastighet för Ethernet-LAN:	10, 100 Mbit/s
Strömförsörjning via Ethernet (PoE) stöd:	Ja
Antal LAN (RJ-45) anslutningar:	5
Temperatur vid drift:	-20 - 50 ° C
Typ av internminne:	DDR2
AC-inspänning:	7 - 31 V
Material, hölje:	Plast
Mottagningskänslighet:	802.11g: -96dBm @ 6Mbit/s to -80dBm @ 54Mbit/s\r\n802.11n: -96dBm @ MCS0 to -78dBm @ MCS7
Modulator:	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Antal USB 2.0 anslutningar:	1
Antenn ökningsnivå (max):	2.5 dBi
Kommunikationsstandarder:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Harmonized System (HS)-kod:	85176990
Antenntyp:	Intern
Intern:	Nej
Medföljande programvara:	MikroTik RouterOS