Millennia HV-32 Bruksanvisning

Läs gratis den bruksanvisning för Millennia HV-32 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4 recensioner. Har du en fråga om Millennia HV-32 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Millennia

Millennia Media, Inc.

4600 Missouri Flat Road

Placerville, CA 95667

http://www.mil-media.com

(530) 647-0750

Fax (530) 647-9921

Music& Media Systems

HV-32 User Guide

revised 042012

Protecting Against Electrostatic

Discharge – Static electricity can harm

delicate components on the HV-32 board.

To prevent static damage, discharge

static electricity from your body before

you touch any jumpers or switches with

the cover removed. You can do so by

touching an unpainted metal surface on

the API rack’s chassis.

Do not install or remove the

module until the console or

rack’s power is off.

Compatible Racks – The HV-32 is

designed to work in an API L200 rack,

Vision or Legacy console. If you are

using another brand, be sure it meets or

exceeds the API spec.

The HV-32 power consumption is:

+140mA,–25mA with Phantom Power

selected

Signal LEDs indicate signal level at

-30dBu (green), +8dBu (yellow) and

+18dBu (red).

Gain is a continuously variable gain

control. It has a high gain jump near full

clockwise for low level signals.

Ribbon-Dyn Mic DC couples the mic to

the gain stage and also provides an

additional 10dB of gain. Use with any

Ribbon or Dynamic mic (like an SM-57).

A mic requiring phantom power will not

work in this mode.

Pad– Attenuates the input signal after

the gain stage by 15dB.

Phantom Power –turns the +48V

phantom power supply on.

Avoid connecting or disconnecting

mics with the +48V on (hot

patching). This can damage the

mic, preamp and make some very

loud pops that can damage your

monitoring system and ears.

Produktspecifikationer