Milwaukee 48-08-0551 Bruksanvisning
Läs gratis den bruksanvisning för Milwaukee 48-08-0551 (2 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 11.5 recensioner. Har du en fråga om Milwaukee 48-08-0551 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
6d
7h
(4x)
7n
(12x)
7a
(2x)
7c
(2x)
7k
(4x)
7b
7j
(4x)
7p
(2x)
7d
(8x)
7e/7f
(2 each)
7r(2x)
NOTE:
Outer Strength Plate-Right (7e) has the same
outside configuration as Outer Strength Plate-Left
(7f). The difference between the two plates is that
Outer Strength Plate-Left (7f) does not have a
threaded hole on the top tab.
7b
7q
(2x)
7m
7g
(2x)
5b
5a
7a
7c
5c
(3x)
7b
7r 7d
(2x)
7p
7j
(2x)
14 5a 5b 5c
5d 5e
15 7c
7r
2 2j
When installing a new Work Piece Support Feed Arm Assembly (14),
the following items must be assembled onto Feed Arm (5b):
Hex Socket Cap Screw (5a), End
Bracket (7a), Feed Arm Sleeve
(7c) with Round Plate (7r) and
three Feed Arm Pads (5c).
NOTE:
Legs and other hardware are not
shown for illustration clarity.
4h
7p(2x)
5b
5e
(2x)
5d
4g
(2x)
4a
4d
(2x)
4c
(2x)
4b
4h
4f
4k
(2x)
4e
(2x)
4j
6c
2 2j
2j can be
purchased
at any hard-
ware store.
Consisting of:
M8 x 45mm Cap
Screw w/ 6mm
Socket Hex Drive
M8 Lock Washer
M8 Flat Washer
4d
4c 6 4c 4d 4h
6c 6d
13 4a 4b 4c 4d 4e
4f 4g 4h 4j 4k
12 5d
5e
1a
1f
1e
1b
8
1c
1g
1d
1k
1j
3b
3c
10 1a 1b 1c 1d 1e
1f 1g 1j 1k
11 1a 1c 1d 1e
1f 1g 3b 3c
7b
18
There are three Leg
Assemblies (11)
There is one Leg
Assembly with an
Adjuster (10)
See detail below for exploded
view of Main Body Assy. (7)
7 7a 7b 7c 7d 7e 7f 7g 7h
7j 7k 7m 7n 7p 7q 7r
7 7a 7b 7c 7d 7e 7f 7g 7h
7j 7k 7m 7n 7p 7q 7r
17 7g 7m
7q
16 1a 1c 1d
1f 1g
9
48-08-0551
FOLDING MITER SAW STAND May 2020
54-40-5460
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
CATALOG NO.
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
SERIAL
NUMBER
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
00
H93A
NOTE: Fastener quantities shown here are for one end of the Main Body.
For illustration clarity, only one corner (leg area) is depicted.
SEE
PAGE 2
FOR PART
LISTINGS
MILWAUKEE TOOL l
www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 2
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1a --------------- Leg Spacer (One per leg) (1)
1b --------------- Adjustable Leg with Insert Adjuster Nut (1)
1c --------------- Washer (One per leg) (4)
1d --------------- Leg Release Lever (One per leg) (4)
1e --------------- Release Lever Spring (One per leg) (4)
1f --------------- Release Lever Pin (One per leg) (4)
1g --------------- C Retaining Ring (One per leg) (4)
1j 42-38-0080 Adjustable Foot (1)
1k 44-20-1215 Adjustable Foot Lock (1)
2 48-08-0554 Mounting Bracket Assembly (Accessory, Set of 2)
(1)
2j ---------------
Cap Screw, Lock Washer and Flat Washer (See Page One)
(2)
3b --------------- Non-Adjustable Leg (One per Assembly) (3)
3c 42-38-0081 Fixed Foot (One per Assembly) (3)
4a --------------- Work Piece Support Upper Bracket (One per Assy.) (2)
4b --------------- Work Piece Support Lower Bracket (One per Assy.) (2)
4c --------------- Washer (Two per Assembly) (5)
4d 43-98-0800 Lock Knob (Two per Assembly) (5)
4e --------------- M6 Hex Lock Nut (Two per Assembly) (4)
4f --------------- Work Piece Support Top Plate (One per Assy.) (2)
4g ---------------
M6 x 16mm Screw with M4 Socket Hex Drive (2 per Assy.)
(2)
4h --------------- M6 x 9mm Step Bolt (One per Assembly) (3)
4j --------------- M6 x 35mm Step Bolt (One per Assembly) (2)
4k --------------- Washer (Two per Assembly) (4)
5a 05-74-1080
M3 x 5mm Cap Screw w/ M2.5 Socket Hex Drive
(1 per Assy.)
(2)
5b --------------- Feed Arm (One per Assembly) (2)
5c 42-52-0030 Feed Arm Pad (Three per Assembly) (6)
5d --------------- Work Piece Support Base (One per Assembly) (2)
5e ---------------
M6 x 10mm Pan Hd. T-30 Machine Screw (2 per Assy.)
(4)
6 48-08-0552 Work Table Assembly (Accessory) (1)
6c --------------- Work Table (1)
6d --------------- Logo Label (1)
7 --------------- Main Body Assembly (1)
7a --------------- End Bracket (2)
7b --------------- Main Body (1)
7c --------------- Feed Arm Sleeve (2)
7d --------------- M8 x 20mm Step Bolt (8)
7e --------------- Outer Strength Plate-Right (2)
7f --------------- Outer Strength Plate-Left (2)
7g --------------- M8 x 12mm Pan Hd. Screw with 2mm Hex Drive (2)
7h --------------- Washer (4)
7j --------------- M8 x 61mm Step Bolt (4)
7k --------------- Inner Strength Plate (4)
7m --------------- Main Handle (1)
7n --------------- M8 Hex Lock Nut (12)
7p 43-98-0048 Lock Knob (2)
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
7q --------------- M8 Square Nut (2)
7r --------------- Round Plate (2)
8 48-08-0553 Carrying Strap (Accessory) (1)
9 --------------- Product Label (1)
10 44-04-0020 Leg Assembly with Adjuster (1)
11 44-04-0025 Non-Adjustable Leg Assembly (3)
12 45-60-0020 Support Base Assembly (2)
13 14-75-0015 Work Piece Support Assembly (2)
14 42-09-0270 Work Piece Support Feed Arm Assy.
(Consists of 1 Assy.)
(2)
15 45-22-7015 Sleeve Assembly (2)
16 14-46-9305 Release Lever Kit (1)
17 31-44-7010 Main Handle Assembly (1)
18 14-46-0207 Mounting Hardware Kit (1)
Produktspecifikationer
| Varumärke: | Milwaukee |
| Kategori: | Sågmaskin |
| Modell: | 48-08-0551 |
Behöver du hjälp?
Om du behöver hjälp med Milwaukee 48-08-0551 ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Milwaukee Manualer
18 Februari 2025
31 Januari 2025
6 Oktober 2024
3 Oktober 2024
26 September 2024
26 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
Sågmaskin Manualer
- Maxx
- Skil
- Defort
- Maestro
- Huvema
- RIDGID
- Parkside
- Plantiflor
- Ergofix
- Baumr-AG
- Spear & Jackson
- McKenzie
- Total
- Prowork
- Craftsman
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025