Milwaukee 48-35-1311 Bruksanvisning
Milwaukee
Laservattenpas
48-35-1311
Läs gratis den bruksanvisning för Milwaukee 48-35-1311 (1 sidor) i kategorin Laservattenpas. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7 recensioner. Har du en fråga om Milwaukee 48-35-1311 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
BULLETIN NO.
54-07-3545
SERVICE PARTS LIST
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 -------------- Steel Strap (16)
2 -------------- Magnet (8)
3 -------------- M3 x 7mm T10 FH Screw (8)
4 -------------- Friction Magnet (2)
5 44-26-0140 Right Magnet Assembly (4)
6 -------------- M3 x 16mm T10 PH ST Screw (1)
7 -------------- Back Plate (1)
8 31-10-0045 Back Plate Kit (1)
9 44-26-0135 Left Magnet Assembly (4)
CATALOG NO. 48-35-1311
REVISED BULLETIN
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
360 Laser Mount
STARTING
SERIAL NO.
DATE
Aug. 2020
WIRING INSTRUCTION
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
6
1
(x16)
7
3
(x8)
4
(x2)
2
(x8)
84 6
7
51 2
3
91 2
3
MILWAUKEE TOOL l www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, Wisc. 53005
Drwg. 1
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2). Inspect sticker applied to the face of the Magnet (2).
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the Orient the Magnet and Steel Strap (1) so that the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the "N/S" faces in the upward direction relative to the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the tool. The left (L) is inserted into the left side of the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the bracket and the right (R) magnet is inserted into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the right side. Insert the Magnet and Steel Strap into the
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter mount so that the post aligns with the inner diameter
on the magnet.
on the magnet.
on the magnet.
on the magnet. After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is on the magnet. After the Magnet and Steel Strap is
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed inserted into the mount, the sticker can be removed
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not and the screws (4) can be hand tightened. Do not
over tighten.
over tighten.
over tighten.
over tighten.over tighten.
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet Assemblies (5)
Assemblies (5)
Assemblies (5)
Assemblies (5) 2 additional sets of Left (L) Magnet Assemblies (5)
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located and Right (R) Magnet assemblies (9) are located
here.
here.
here.
here.here.
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw In order to remove the Back Plate (7), remove Screw
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate (6). The screw will act like a stop so the back plate
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.does not come o with misuse.
**
Produktspecifikationer
| Varumärke: | Milwaukee |
| Kategori: | Laservattenpas |
| Modell: | 48-35-1311 |
Behöver du hjälp?
Om du behöver hjälp med Milwaukee 48-35-1311 ställ en fråga nedan och andra användare kommer att svara dig
Laservattenpas Milwaukee Manualer
21 September 2024
21 September 2024
27 Augusti 2024
13 Augusti 2024
10 Augusti 2024
Laservattenpas Manualer
- Skil
- Toolcraft
- Stabila
- Futech
- Fluke
- Klein Tools
- Bruder Mannesmann
- Craftsman
- PLS
- Hilti
- Brandson
- Leica
- Makita
- Ozito
- Stanley
Nyaste Laservattenpas Manualer
29 Mars 2025
27 Mars 2025
22 Mars 2025
13 Mars 2025
10 Mars 2025
6 Januari 2025
6 Januari 2025
6 Januari 2025
4 Januari 2025
4 Januari 2025