Milwaukee M18 2665-22 Bruksanvisning

Milwaukee Borrmaskin M18 2665-22

Läs gratis den bruksanvisning för Milwaukee M18 2665-22 (16 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 1.5 recensioner. Har du en fråga om Milwaukee M18 2665-22 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

Cat. No. / No de cat.

2662-20, 2663-20, 2664-20, 2665-20

M18™ IMPACT WRENCHES AND IMPACT DRIVER

CLÉS À CHOCS ET VISSEUSE DE M18™

LLAVES DE IMPACTO E IMPULSOR DE IMPACTO DE M18™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instructions.

Charging improperly or at temperatures outside

the specied range may damage the battery and

increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

IMPACT WRENCHES/IMPACT

DRIVER

• Hold power tool by insulated gripping surfaces,

when performing an operation where the fas-

tener may contact hidden wiring. Fasteners con-

tacting a “live” wire may make exposed metal parts

of the power tool “live” and could give the operator

an electric shock.

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Keep hands away from all cutting edges and

moving parts.

•

WARNING

To reduce the risk of injury, when

working in dusty situations, wear

appropriate respiratory protection or use an

OSHA compliant dust extraction solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training..

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to lter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Impacts per Minute Under Load (IPM)

C US

UL Listing for

Canada and U.S.

SPECIFICATIONS

Volts .............................................................. 18 DC

Battery Type .................................................M18™

Charger Type ................................................M18™

Cat. No. 2662-20

.....................................................

RPM ............................................................. 0-2000

Drive Shank ..........................................1/2" Square

IPM .............................................................. 0-2500

Cat. No. 2663-20

.....................................................

RPM ............................................................. 0-2000

Drive Shank ..........................................1/2" Square

IPM .............................................................. 0-2500

Cat. No. 2664-20

.....................................................

RPM ............................................................. 0-2000

Drive Shank ..........................................3/4" Square

IPM .............................................................. 0-2500

Cat. No. 2665-20

.....................................................

RPM ............................................................. 0-2000

Drive Shank .............................................7/16" Hex

IPM .............................................................. 0-2500

Recommended Ambient

Operating Temperature ......................0°F to 125°F

FUNCTIONAL DESCRIPTION

1. Handle

2. Trigger

3. Control switch

4. Drive shank

5. Hex drive (2665-20)

6. Square drive with pin detent (2662-20)

7. Square drive with hog ring (2663-20, 2664-20)

Produktspecifikationer

Varumärke:	Milwaukee
Kategori:	Borrmaskin
Modell:	M18 2665-22
Färg på produkten:	Zwart
Användarmanual:	Ja
Beeldscherm:	LED
Skärm diagonal:	21.5 "
Upplösning:	1920 x 1080 Pixels
Pekskärm:	Nee
Original bildförhållande:	16:9
Videolägen som stöds:	1080p
Betraktningsvinkel, horisontell:	170 °
Betraktningsvinkel, vertikal:	160 °
Skärmform:	Flat
Typiskt kontrastförhållande:	1000:1
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
DVI-port:	Nee
Monteringsalternativ för kabellås:	Nee
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	2 W
Strömförbrukning (i standby):	0.4 W
Display, antal färger:	16.78 miljoen kleuren
Strömförbrukning (när avstängd):	0.35 W
HD typ:	Full HD
3D:	Nee
Displayteknik:	LED
Respons tid:	1 ms
Grafikupplösningar som stöds:	1920 x 1080 (HD 1080)
VESA montering:	Ja
Panelmonteringsgränssnitt:	100 x 100 mm
Ljusstyrka (typiskt):	250 cd/m²
Bildförhållande:	16:9
Kontrastförhållande (dynamisk):	100000000:1
Integrerad TV-tuner:	Nee
Inbyggd kamera:	Nee
Djup (utan bas):	188.8 mm
Höjd (utan bas):	406.1 mm
Bredd (utan bas):	508 mm
Vikt (utan bas):	- g
Energiförbrukning (HDR) per 1000 timmar:	- kWu
Energieffektivitetsklass (SDR):	F
Energiförbrukning (SDR) per 1000 timmar:	19 kWu
AMD FreeSync:	Ja
NVIDIA G-SYNC:	Nee
Tunn klient installerad:	Nee
Typ av panel:	TN
Inbyggd USB-hubb:	Nee
Stöd för VESA Adaptive Sync:	Ja
AC-ingångsspänning:	100 - 240 V
Strömförbrukning (typiskt):	17 W
Tiltvinkelområde:	-5 - 15 °
Energieffektivitetsskala:	A tot G
lutningsjusteringar:	Ja