Milwaukee M18 Fuel 2755B-22 Bruksanvisning
Milwaukee
Skruvmaskin
M18 Fuel 2755B-22
Läs gratis den bruksanvisning för Milwaukee M18 Fuel 2755B-22 (16 sidor) i kategorin Skruvmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Milwaukee M18 Fuel 2755B-22 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
Cat. No. / No de cat.
2753-20, 2754-20, 2755-20, 2755B-20
M18 FUEL™ 1/4" HEX IMPACT DRIVER, 3/8" COMPACT IMPACT
WRENCH & 1/2" COMPACT IMPACT WRENCHES
TOURNEVIS À PERCUSSION HEXAGONAL DE 6 mm (1/4")
M18 FUEL™, CLÉ À CHOCS COMPACTE DE 3/8" M18 FUEL™,
ET CLÉS À CHOCS COMPACTE DE 1/2" M18 FUEL™
DESTORNILLADOR DE IMPACTO HEXAGONAL M18 FUEL™
DE 6 mm (1/4"), LLAVE DE IMPACTO COMPACTA M18 FUEL™
DE 3/8", LLAVE DE IMPACTO COMPACTA M18 FUEL™ DE 1/2"
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES AND DRIVERS
• Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C US
UL Listing for Canada and U.S.
SPECIFICATIONS
Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2753-20
.....................................................
RPM ............................................................0 - 3000
IPM .............................................................0 - 3700
Cat. No. 2754-20, 2755-20, 2755B-20
....................
RPM ............................................................0 - 2500
IPM .............................................................0 - 3200
FUNCTIONAL DESCRIPTION
1. 1/4" Hex drive chuck
(2753-20)
2. LED
3. Control switch
4. Trigger
5. Handle
6. Speed control
7. Belt clip
8. 3/8" Square drive anvil (2754-20)
9. 1/2" Square drive anvil (2755B-20)
10.1/2" Square drive anvil with pin detent (2755-20)
1
2
4
3
8
9
Cat. No. 2753-20
Cat. No.
2754-20
Cat. No.
2755B-20
10
Cat. No.
2755-20
7
5
6
Produktspecifikationer
| Varumärke: | Milwaukee |
| Kategori: | Skruvmaskin |
| Modell: | M18 Fuel 2755B-22 |
Behöver du hjälp?
Om du behöver hjälp med Milwaukee M18 Fuel 2755B-22 ställ en fråga nedan och andra användare kommer att svara dig
Skruvmaskin Milwaukee Manualer
30 December 2025
30 December 2025
26 December 2024
7 Oktober 2024
4 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
23 September 2024
23 September 2024
Skruvmaskin Manualer
- Fuxtec
- Metabo
- Ferm
- Basetech
- Trotec
- Chicago Pneumatic
- SW-Stahl
- Laserliner
- Mafell
- Facom
- Festool
- Dedra
- EMOS
- Wera
- Ingersoll Rand
Nyaste Skruvmaskin Manualer
13 Januari 2025
12 Januari 2025
8 Januari 2025
5 Januari 2025
5 Januari 2025
4 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025